PHILIPS M20 Corded Phone User Manual
- June 4, 2024
- Philips
Table of Contents
PHILIPS M20 Corded Phone User Manual
1 Important safety instructions
This product shall be used under the conditions of not interfering with legal radio stations and being protected from interference.
To avoid damage or malfunction
⚠ Warning:
- Avoid high temperature (60°C), humid or corrosive environments.
NCC warning:
– This product shall be used under the indoor conditions of not interfering
with legal radio stations and being protected from interference.
– Please use the product appropriately to reduce the waves.
2 Your phone
What is in the box
Overview of the phone
-
Handset
-
Outgoing call log
• It shows the outgoing call log. -
Incoming call log
• It shows the incoming call log. -
Brightness
• It adjusts the brightness of the screen in on-hook condition. -
Recall
• It is used for recall in off-hook condition. -
Speaker
• Make and receive calls through the speaker. -
Redial
-
Call-back
-
Call transfer
-
Pause
-
Delete
• It deletes a call log when you query incoming or outgoing call logs. Press and hold for 3s to delete all incoming or outgoing call logs.
• It deletes a digit when you dial a number. -
Volume
-
Settings
-
Up/Down
-
LCD screen
-
Cable socket
3 Get started
1. Connect the base station
Connect each end of the line cord to:
- ☎ telephone socket on the top of the base station
- telephone socket on the wall
2. Install the handset
Connect each end of the coil cord to:
- telephone socket at the bottom of the handset
- telephone socket at the left side of the base station.
3. Set the date and time
- Press (SETTING) The screen displays. Press (SETTING) again to confirm. After entering the date/time settings screen, the year digit starts to blink. Press (▴▾) to set the year and then press to set the day/hour/minute.
- Pick up the handset to confirm the setting.
Remarks
- After the time and date are set, the LCD screen automatically displays the corresponding week.
4 Calls
Make a call
You can make a call in these ways:
- Normal call
- Call from the redial list
- Call from the call log
Normal call
- Pick up the handset or press .
- Dial the phone number.
• To erase a digit, press.
Redial a call
- Pick up the handset.
- Press . The most recent outgoing call is dialled.
Call from the call log
Query incoming calls
Turn the speaker on or off
Press
5 Settings
Adjust the volume
Adjust the speaker volume
You can set the speaker volume in the following ways:
- Press to enter the speaker mode.
- Press ◄ to adjust the speaker volume. The speaker volume is set to high upon factory delivery.
Set the brightness
There are five brightness levels for selection.
- In the on-hook condition, press ❄ to adjust the screen of the LCD screen. Press this button continuously to display different brightness. The brightness is set to level 3 upon factory delivery.
- Pick up the handset to confirm the setting.
Temporary time setting
- Press (SETTING) to enter the setting mode.
- Press to select.
- Press (SETTING) again to enter the temporary time setting menu.
- “FLASH 600” is displayed.
- Press to set the time.
- Pick up the handset to confirm the setting.
6 Technical data
Screen dimensions
- Screen size: 3.3 inches
General specification and features
- Speaker phone
- Call back and redial
- Call transfer or three-way calling with the transfer button in cooperation with switches
Weight and dimensions
- Base station and handset: 539.0 grams
- 77.0 × 218.0 × 179.0 mm (H × W × D)
7 Frequently asked questions
No dialing tone
- Make sure your phone is properly connected to the line cord.
No voice from the receiver or no voice transmission
- Make sure the handset is properly connected to the base through the coil cord.
The caller ID does not display
- The service is not activated. Check with your service provider.
- The caller’s information is withheld or unavailable.
2021 © MMD Hong Kong Holding Limited. All rights reserved. Specifications are subject to change without notice.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its affiliates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>