Tribit CallElite 81 Wireless Headset with Microphone Bluetooth 5.0 Cell Phone Headphone User Manual
- June 9, 2024
- Tribit
Table of Contents
Tribit CallElite 81 Wireless Headset with Microphone Bluetooth 5.0 Cell
Phone Headphone
Pairing flow chart
Warm Tip:
- The headset is in the pairing state only when the red and green light flash alternately. If the connection fails, you can restore the headset to factory settings (long press the “MFB” button and “Volume+” button for 4s) to clear the headset pairing list in the device. After the list is cleared, it will automatically enter the pairing state.
- Due to different conditions, the effective connecting range of this headset is within l 0-30 mm. If your device is out of this range, the headset will give a sound “disconnected”.
Input And Output Settings
- Connect the headset to the computer via Bluetooth or dongle.
- Right click on the sound icon, as shown below:
- Open the sound settings, as shown below:
- In the sound setting interface, set the “Output” and “Input” to the headset driver. (The default is the system’s own output and input), as shown below:
Output
Choose your output device
Certain apps may be set up to use different sound devices than the one selected here. Customize app volumes and devices in advanced sound options.
Device properties
Master volume
Troubleshoot
Manage sound devices
Input
Choose your input device
Certain apps may be set up to use different sound devices than the one
selected here. Customize app volumes and devices in advanced sound options.
- Open the conference software, and the “Input” and “Output” are also set to the input and output of the headset driver.
Note: The driver at the speaker icon in the lower right corner of some computers has stereo for music audio output and headfree-ag for call audio output.
Teams Meeting Tool Setting
- Open the meeting tool.
- Select the” … ” property settings, as shown below:
- Select the “Device settings”, as shown below (A):
- Select the “Microphone” input and the “Speaker” output as the headset driver, as shown below (B).
Webex Meeting Tool Setting
- Open the meeting tool.
- Select the “Audio” setting in the “Mute” menu bar. Then select the default “Speaker” and “Microphone” as the headset driver, as shown below:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>