robustel R3000LG LoRaWAN 4G Gateway User Manual
- June 9, 2024
- robustel
Table of Contents
R3000 LG
Hardware Manual
Version: 1.0.0
Regulatory and Type Approval Information
Table 1: Directives
2011/65/EU| The European RoHS2.0 2011/65/EU Directive was issued by the
European parliament and the European Council on 1 July 2011 on the restriction
of the use of certain Hazardous substances in electrical and electronic
equipment.
---|---
On June 4, 2015, the Official Journal of the European Union published the
RoHS2.0 Amendment Directive (EU)
In 2015/863, four phthalates (DEHP, BBP, DBP, DIBP) were officially included
in the list of restricted substances in Appendix II of RoHS 2.0 (2011/65/EU).
From July 22, 2019, all electronic and electrical products exported to Europe
(except medical and monitoring equipment) must meet this restriction; from
July 22, 2021, medical equipment and monitoring equipment will also be
included in the scope of control.
2012/19/EU| The European WEEE 2012/19/EU Directive was issued by the European
parliament and the European Council on 24 July 2012 on waste electrical and
electronic equipment.
2013/56/EU| The European 2013/56/EU Directive is a battery Directive which
published in the EU official gazette on 10 December 2013. The button battery
used in this product conforms to the standard of 2013/56/EU directive.
Table 2: Toxic or Hazardous Substances or Elements with Defined Concentration Limits
| Name of the Part | Hazardous Substances |
|---|---|
| (Pb) | (Hg) |
| Metal parts | o |
| Circuit modules | o |
| Cables and cable assemblies | o |
| Plastic and polymeric parts | o |
o: Indicates that this toxic or hazardous substance contained in all of the
homogeneous materials for this part is below the limit requirement in RoHS2.0.
X: Indicates that this toxic or hazardous substance contained in at least one
of the homogeneous materials for this part might exceed the limit requirement
in RoHS2.0.
-: Indicates that it does not contain the toxic or hazardous substance.
Radio Specifications
| RF technologies | 2G, 3G, 4G, LoRa, GNSS* |
|---|
Cellular Frequency*
| 4G: LTE FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/ B25/B26/B28 LTE
TDD: B38/B39/B40/B41
3G: WCDMA: B1/B2/B4/B5/B6/B8/B19
2G: GSM: B2/B3/B5/B8| ****
EMEA, Oceania, North America
LoRa Frequency| 863-870 MHz (Europe)
915-927 MHz (Australia)
902-928 MHz (North America) 920-928 MHz (Japan)
Max RF power| 35 dBm@GSM, 25 dBm@WCDMA, 25 dBm@LTE, 24.5 dBm@LoRa
* May vary on difference models.
Simplified EU Declaration of Conformity
We, Guangzhou Robustel Co., Ltd. are located at 501, Building #2, 63 Yongan
Road, Huangpu District, Guangzhou, China, declare that this radio equipment
complies with all applicable EU directives. The full text of the EU DoC is
available at the following internet address:
www.robustel.com/certifications/
FCC Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference
that may cause undesired operation.
IC Declaration of Conformity
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is subject to the
following two conditions:
(1)This device may not cause interference.
(2)This device must accept any interference, including interference that may
cause undesired operation of the device.
Radio Frequency Exposure Statement for IC
This device complies with IC exposure limits set forth for an uncontrolled
environment. This device shall be installed and operated with minimum distance
20cm between the radiator & body.
Related download link
Find more product documents or tools at:
www.robustel.com/en/documentations/
Technical Support
Tel: +86-20-82321505
Email: support@robustel.com
Web: www.robustel.com
Document History
Updates between document versions are cumulative. Therefore, the latest document version contains all updates made to previous versions.
Date| Firmware Version| Document Version| Change
Description
---|---|---|---
July 28, 2022| 5.0.0| 1.0.0| Initial release.
| | |
| | |
| | |
Overview
Robustel R3000 LG is an industrial-grade LoRaWAN gateway, integrated with LoRaWAN wireless communication technology and cellular network technology, to provide users with wireless long-distance data transmission services.
Package Checklist
Before commencing installation ensure your package has the following
components:
Note: The accessories could be different on specific order.
Panel Layout(May Vary on Different Models)
Interface Descriptions
- PIN Assignment**
PIN| Debug| RS-232| RS-485| Direction
---|---|---|---|---
1| CR| —| —| Gateway ¬ Device
2| CT| —| —| Gateway ® Device
3| GND| GND| GND| —
4| —| TXD| Data+(A)| Gateway ® Device
5| —| RXD| Data+(B)| Gateway ¬ Device
6| —| RTS| —| Gateway ® Device
7| —| CTS| —| Gateway ¬ Device
PIN| Polarity**
---|---
8| Positive
9| Negative
10| GND
| PIN | DI | Direction |
|---|---|---|
| 1 | DI1+ | Gateway ¬ Device |
| 2 | DI1- | Gateway ¬ Device |
| 3 | DI2+ | Gateway ¬ Device |
| 4 | DI2- | Gateway ¬ Device |
Typical Application :
- USB Interface.**
Function| Operation
---|---
Firmware upgrade| USB interface is used for batch firmware upgrading, but cannot be used for sending or receiving data from slave devices which connected to it. You can insert a USB storage device into the gateway’s USB interface, such as a U disk or a hard disk. If there have a supported configuration file or a gateway firmware in this USB storage device, the gateway will automatically update the
configuration file or the firmware. For more details, see RT123_SM_RobustOS Software Manual**. - LED Indicator.
Name| Color| Status| Description
---|---|---|---
RUN| Green| On, fast blinking (250ms blink time)| Gateway is powered on (System is initializing)
On, blinking (500ms blink time)| Gateway starts operating
Off| Gateway is powered off
MODEM| Green| On, solid| Link connection is working
Off| Link connection is not working
USR-OpenVPN| Green| On, solid| OpenVPN connection is established
Off| OpenVPN connection is not established
USR-IPsec| Green| On, solid| IPsec connection is established
Off| IPsec connection is not established
****| Green| On, solid| High Signal strength (21-31) is available
Yellow| On, solid| Medium Signal strength (11-20) is available
Red| On, solid| Low Signal strength (1-10) is available
/| Off| No signal
NET| Green| On, solid| Connection to 4G network is established
Yellow| On, solid| Connection to 3G network is established
Red| On, solid| Connection to 2G network is established
/| Off| Connection to network is not established or establishing
SIM| Green| On, Solid| Main card is being used
On, blinking| Backup card is being used
Off| No SIM card
Note: You can choose the display type of USR LED. For more details, please
refer to
RT123_SM_RobustOS Software Manual Service > Advanced > System >System
Settings > User LED Type.
- Reset Button.**
Function| Operation
---|---
Reboot| Press and hold the RST button for 2~ 5 seconds under the operating status.
Restore to default configuration| Press and hold the RST button for 5~10 seconds, the RUN LED starts blinking quickly, the router will restore to default configuration.
Restore to factory default settings| Once the operation of restoring default configuration is performed twice within one minute, the router will restore to factory default settings.
Note: The more details please refer to RT123_SM_RobustOS Software Manual, 2.3 Factory Reset.** - Ethernet Ports. There are two Ethernet ports on R3000 LG, including ETH0 and ETH1. Each Ethernet port has two LED indicators. The yellow one is a link indicator, while the green one is a speed indicator. For details about status, see the table below.
Indicator| Status| Description
---|---|---
Link indicator| On, solid| Connection is established
On, blinking| Data is being transferred
Off| Connection is not established
Speed indicator| On, solid| 100 Mbps mode
Off| 10 Mbps mode
Hardware Installation
- SIM Card Installation. Loosen the screws associated with the cover by using a screwdriver and then find the SIM card slot/Micro SD card slot. Press the card with finger until you hear a click and then tighten the screws associated with the cover by using a screwdriver. Put back the cover and tighten the screws associated with the cover by using a screwdriver.
- Antenna Installation. Rotate the antenna into the antenna connector accordingly.
- Mounting Kit installation. (Optional)
- Terminal Block Installation. Insert the terminal blocks into the interfaces connector, then can connect the devices or sensors to the gateway via corresponding interfaces e.g. RS232/RS485, DIDO…
- Grounding the Device. Grounding will help to prevent the noise effect due to electromagnetic interference (EMI). Connect the device to the site ground wire by the grounding screw before powering on.
- Power Supply installation. Following to the color of the head, connect the cable marked red to the positive pole through a terminal block, and connect the yellow one to the negative in the same way.
Note: The range of power voltage is 9 to 60V DC.
Login to the Device
- Connect the router’s Ethernet port to a PC with a standard Ethernet cable.
- Before logging in, manually configure the PC with a static IP address on the same subnet as the gateway address, click and configure “Use the following IP address”.
- To enter the gateway’s web interface, type http://192.168.0.1 into the URL field of your Internet browser.
- Use login information shown in the product label when prompted for authentication.
- After logging in, the home page of the web interface is displayed, then you can view system information and perform configuration on the device.
- The automatic APN selection is ON by default, if need to specify your own APN, please go to the menu Interface- > Link Manager->Link Setting->WWAN Settings to finish the specific setting.
- The more configuration details please refer to RT123_SM_RobustOS Software Manual. (END)
Support: support@robustel.com
Website: www.robustel.com
©2022 Guangzhou Robustel Co., Ltd.
All rights reserved. Subject to change without notice.
RT018_HM_R3000_LG
References
- 4G/LTE/5G/Cellular Routers, Gateways and Modems for Industrial IoT - Robustel
- Certifications | Robustel - Industry-leading IoT Solutions Provide
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>