RICE LAKE 350-10-3 Dual Ramp Wheelchair Scale User Guide
- June 9, 2024
- RICE LAKE
Table of Contents
RICE LAKE 350-10-3 Dual Ramp Wheelchair Scale
Safety First
Never leave a patient unattended
Set the wheelchair brakes once the patient is on the scale
Orient the scale for easiest entry and exit to ensure ramps are clearly
accessible
Only use ramps for entry and exit, do not enter or exit the scale over non-
ramp sides
Set Up for Accuracy
The scale must be on a flat surface
Ramps must not touch anything, including the floor, after loading
Avoid factors that affect accuracy, such as fans, extra moisture or other
issues
Keep the scale clean of debris
Tare wheelchair weight by placing the empty wheelchair on the scale and
pushing the Tare button
Gross weight should read 0.00 before the patient is weighed on the scale
Remove accessories such as blankets, coats and handbags before weighing
Operator Best Practices
Never overload the scale past maximum capacity
Make sure the scale has ample battery strength or use an AC adaptor
Select LB/KG for desired unit of measure
Avoid placing the scale on carpets or uneven surfaces
HEADQUARTERS
West Coleman Street
Rice Lake, Wisconsin – USA
www.ricelake.com/health
Specifications subject to change without notice. © 2018 Rice Lake Weighing
Systems PN 192049 10/22 REV-B