MobilitySound GPS Dongle for Kenwood Nexedge Mobile Radio User Manual

MobilitySound GPS Dongle for Kenwood Nexedge Mobile Radio

GPS Dongle for Kenwood Nextedge Mobile Radio

Specification and User’s Manual

GPS Dongle Specification

• Receiver type
  • Channels 50
  • Frequency L1
  • Signals GPS C/A Code
• Configuration
  • Time pulse 0.25 Hz to 1 kHz
  • Navigation update rate up to 5Hz (ROM)
• Time-To-First-Fix(1)
  • Cold Start (Autonomous) 28 s
  • Warm Start (Autonomous) 28 s
  • Hot Start (Autonomous) 1 s
  • Aided Starts(2) 1 s
• Sensitivity(3)
  • Tracking & Navigation -160 dBm
  • Reacquisition -160 dBm
  • Cold Start (Autonomous) -147 dBm
• Accuracy Horizontal position(4) < 2.5 m
  • Autonomous < 2.0 m SBAS
  • RMS 99% 30 ns <60 ns
  • Velocity(5) 0.1m/s
  • Heading(5) 0.5 degrees
• Limits Acceleration 4 g
  • Altitude(6) 50000 m
  • Velocity(6) 500 m/s
• Baudrate 9600 default

Note:

• All satellites at -130 dBm
• Dependent on aiding data connection speed and latency
• Demonstrated with a good active antenna
• CEP, 50%, 24 hours static, -130dBm, SEP: <3.5m
• 50% @ 30 m/s
• Assuming Airborne <4g platform

KENWOOD NX-700 GPS SETUP

STEP:

1. Connect programming cable with PC and your device then Run software KPG-111D.
2. Select COM Port

Remark: Maybe in difference computer will be show difference COM port .

3. Read Data from the transceiver

Press “Read” will start download data from transceiver to PC.

4. Select Edit  Optional features  Optional features 1

5. Check Common Page1 setting

6. Check Common Page2 setting

7. Page 3 setting

Setting COM Port2 for GPS and Baudrate 9600 (see GPS Baudrate).

8. Check Common Page 4 setting
   Setting finished press “close” icon

9.  Optional Optional Feature 2

10. Select GPS
    Setting finished press “close” icon.

11. Key Assignment

12. Select Menu

13. Select “Utility” and add “GPS position Display” Item to function list

The “GPS Position Display” item will show in function list.
Setting finished press “closed”.

14. Write Data to the Transceiver

Press “Write” will upload to your transceiver.

KENWOOD NX-700 GPS FUNCTION READING

1. Power on the RADIO

2. PRESS Key Select GROUNP.

3. Press or  KEY Select MENU to UTILITY

4. Press key.

5. Press key.
   The screen will be show GPS data .

Eascape MENU Press Key.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>