MobilitySound M100V Bluetooth Bone Conduction Headset User Manual
- June 15, 2024
- MobilitySound
Table of Contents
- Quick start
- correct wearing
- principle
- power on/off
- Connect with Mobile Phone
- Connect with Two Mobile Phones
- Playing/Pause
- Next/ Last Song & Volume Adjustment /Mic Mute
- Call Managemant
- Voice Assistant
- Factory Reset
- Charging
- Accessories
- Specifications
- Warranty Card
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
User Manual
M100V
Quick start
correct wearing
principle
power on/off
Connect with Mobile Phone
a. After powered on, the headset will go into pairing mode
Blue and red light flashes altemately
Pairing
b. Turn on the Bluetooth function on mobile phone search M100V
Blue breath light flashes once every 10 seconds
Connected
Connect with Two Mobile Phones
a. Tum off the Bluetooth function of the first mobile phone which was paired with “M100V” already.
b. Tum on the second mobile’s Bluetooth function and search °“M100V” for pairing.
c. Turn on the first mobile’s Bluetooth function. Search and connect the “M100V” paired before.
Playing/Pause
Next/ Last Song & Volume Adjustment /Mic Mute
Long press the “volume -” button 2ss to mute microphone during call.”Toot”
tone will be heard every 10ss during microphone muted.
Long press the same button 2ss again to un-mute microphone
Toot
Call Managemant
When call is coming, red light flashes every 3 seconds
During call, blue light flashes every 10 seconds
Voice Assistant
Available to wake up voice assistant by touch the multi-function button for
4ss when connected with cell phone (not in music mode).
Pause music to wake up voice assistant if in music mode.
Factory Reset
Blue and red light flashes alternately
toot toot
Charging
Red light falshes when battery low
Prompt tone “didi” every 10 seconds
Solid red light when charging, solid blue light when fully charged
Accessories
Headset – – – – – —————-1
Charge Cable- – – – – ————–1
User Manual – – – – – ————–1
Silicone Earplugs – – – – – – – – — ——-2
Velvet Bag – – – – —————- 1
Specifications
Model No.: M100V
Bluetooth Version: 5.2
Bluetooth Protocol: A DP, AVRCP, HFP, AAC, etc.
Transmission Distance: 30m(without obstacle)
Weight: 40g
Audio Channel: Stereo
Speaker Frequency: 50HZ-20KHZ
Sound Quality: APTX-HD/no distortion
Microphone: Aj dual mic noise reduction technology
Standby: 200H
Music Time: 8H(70% volume)
Charge Time: 1.5H
Charge Votage: 5VDC(<24V)
Charge Port: Type-C USB
Battery Capacity: 180mAh
Working Temperature: -10 C ~60 C
Battery Charge Time: >1000
Waterproof Level: IP65
Note:
- The correct wearing position of the bone conduction speaker of this headset is the cheek bone in front of the ear. Please do not put speaker into ears.
- Listening to high volume music for long time may cause hearing loss. Please try to listen at moderate level volume.
- Avoid dropping from high which causese damage to sound quality. Keep away from fire and high voltage equipments.
- Please store the headset in a dry and ventilated place. When the headset is not used for a long time, charge it every two months
- If the headset is stained with water or sweat after exercising, please use a clean cloth to wipe it for long-term use.|
- Please reset the headset if it cannot work well.
- Please check the charging port before charging to make sure there are no water stains or foreign matters.
Warranty Card
Customer Name| | Phone No.|
---|---|---|---
Product Name| | Product No.|
Customer Address| | Date of Purchase|
Dealer Name| | Phone No.|
Date of Repair| | Defective Status|
Repair Result| | |
Warranty Coverage
Button failure, no sound from speaker or microphone, call not work, unable to
charge normally
Out of Warranty service
Damage caused by negligence.
Damage caused by unauthorized disassemble and modification.
Damage caused by charging with high voltage or manual abuse.
CHECK OUT CARD| Checker:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>