naxa NG-1500 Gaming True Wireless Bluetooth Earbuds with Charging Case Instruction Manual

Gaming True Wireless Bluetooth®
Earbuds with Charging Case
Model No.:NG-1500
Instruction Manual

NG-1500 Gaming True Wireless Bluetooth Earbuds with Charging Case

PLEASE READ ALL INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE USE

Description of parts:

1. Earphone base and charging case
2. Earphone base LED indicator.
3. Earphone touch panel,touch it to control all functions of the earphone
4. Earphone LED indicator
5. Earphone charging port
6. Charger Case Battery Power LED indicator
7. Type-C port

Specifications:

Battery base: Li-Po 300mAh
Battery of earphones: Li-Po 30mAh*2
Bluetooth compatible version: 5.0
Working range: 10m
Charging time for the case:1-2 hours
Up to 4 hrs of listening time on one change
More than 10 hrs of listening with multiple additional charges in the case

Operation:

1. Power On and pairing: Take out earphone from charging base-the earphones will power on and paired automatically. Turn on your mobile Bluetooth, search for the device “NG-1500”, and click it. You will hear the tone • meaning the eamhone connected with your mobile. When earphone is turned off, press and hold the earphone to tum it on.
2. Power off: Put earphone into charging base; the earphone will power off and begin charging automatically • press and hold the earphone to turn it off. 3- Double click left earphone to go back previous song.
3. Double click right earphone to skip to next song.
4. Triple-click left earphone to decrease volume Triple-click right earphone to increase volume.
5. Pause/Play:Single click any one earphone to pause or play music.
6. Press the earphone button one time answer or hang up the phone calls.
7. Press and hold the earphone button two seconds to rejee tile phone call.
8. Earphone will power off after 3 minutes disconnected from any device.
9. Gaming mode: Four times click any one earphone to switch to Gaming mode.Operate as the same way to switch back to music mode. Gaming mode with low latency for mobile gaming.
10. Press ancl hold for 5 secs to tum off.

LED indicator:
Power on:both earphones flash red & green light.
Power off: both earphone green lights tum off
Earphone Pairing: Both earphones quick flash green lights, once two earphone be paired, one earphone keep quick flash green lights, one earphone flash green lights every 2 seconds When earphones connected with mobile, both earphones flash green lights every 5 seconds.
Music mode:both earphones light off.
Earphone base charging: The case both side flashing red & green lights, and the power indicator will showing the earphone base charging stauts. When the base is fully charged both indicator lights on, and the earphone base power indicator show 100%.
When earphone to be charging in base: The base both side indicator lights on red,when earphone is fully charged, both side red indicator light turns off.
Earphone Charging: Earphone lights on red. Lights turn off when earphones is fully charged.
Charging:
Put your earphone into charging base and make sure the earphone be well connected with the charging port to get your earphones to be charged.
When you’re charging the battery low, insert the type C cable we provided into earphone type C port. Connect it with a safe adapter or USB output for charging your TWS earphone and earphone base.

Care and Maintenance

Read the following recommendations before using the Bluetooth Earbuds. Following these you will be able to enjoy the product for many years.

• Don’t expose the Bluetooth Earbuds to liquid, moisture or humidity to avoid the product’s internal circuit being affected.
• Don’t use abrasive cleaning solvents to clean the device.
• Don’t expose the device to extremely high or low temperature as this will shorten the life of electronic devices, destroy the battery or distort certain plastic parts.
• Don’t dispose of the device in a fire as it will result in an explosion.
• Don’t expose the device to contact with sharp objects as this will cause scratches and damage.
• Don’t let the device fall on the floor. The internal circuit might get damaged
• Don’t attempt to disassemble the device as it may get damaged if you are not professional.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Conned the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
To make a warranty claim, do not return this product to the store. Please email support@naxa.com or call 1-866-411-6292 .

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>