SONOFF SwitchMan R5 Scene Controller User Manual
- June 9, 2024
- SonOFF
Table of Contents
SONOFF SwitchMan R5 Scene Controller
Before using R5, please take out the battery insulation sheet.
Feature
R5 is a 6-key scene remote controller and can work with the devices with “eWeLink-Remote” feature. When R5 is added into the gateway successfully, it can trigger other smart devices by setting Scene on eWeLink App
Add R5 to “eWeLink-Remote” gateway
Enter the setting interface of “eWeLink-Remote” gateway, click “eWeLink-Remote sub-devices” and “add”, then trigger any button on R5 to add successfully.
Set scene control
Product Parameter
- Model : R5
- Color : Dim Gray
- Working temperature : 0°C- 40°C
- Power supply : 6V (3V button cell x 2)
- Battery model : CR2032
- Product Size : 86x86x13.5mm
- Casing material : PCVo
Installation Methods
Scan
the QR code or visit the website to learn about the newest user manual and
help.
FCC Warning
Changes or modifications not expressly approved by the party responsible for compliance could avoid the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Hereby, Shenzhen Sonoff Technologies Co., Ltd. declares that the radio equipment type R5 is in compliance with Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address: https://sonoff.tech/usermanual
Hereby, Shenzhen Sonoff Technologies Co., Ltd. declares that the radio equipment type R5 is in compliance with Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address: https://sonoff.tech/usermanuals
Shenzhen Sonoff Technologies Co., Ltd.
3F &6F, Bldg A, No. 663, Bulong Rd, Shenzhen, Guangdong, China
- Website: sonoff.tech
- ZIP code : 518000
MADE IN CHINA
Glad to know you are satisfied with SONOFF products. It would mean a lot to us ifyou can take a minute to share your buying experience.
Get the latest news by following us: New arrival Promotion How-to videos
