TrolMaster HCS-2 Hydro-X Pro Controller User Manual
- June 9, 2024
- TrolMaster
Table of Contents
TrolMaster HCS-2 Hydro-X Pro Controller
INSTALLATION INSTRUCTIONS
-
Secure the mounting plate to the wall using 4 screws.
-
Place the controller onto the mounting plate capture hooks.
-
Slide the controller from right to left until it “locks” into place.
-
To release the controller, press on the lock and slide the controller to the right.
-
Controller Power core, sensors, device stations and internet cable to each ports accordingly
-
Scan the QR code below to view the online tutorial video.
GENERAL INFORMATION
WARRANTY
TroIMaster only uses high quality components Under normal. operating
conditions, the mechanical and electronic components are covered by a three-
year warranty from the original date of purchase. For service, return the
HCS-2 Hydro-X Pro Environment Control System. System in the original packaging
to your shop with the original sales receipt. Components that are excluded
from warranty are components that have failed due to abnormal usage.
In the case of defects of the HCS-2 Hydro-X Pro Environment Control System,
the controller will either be replaced or repaired using new or reconditioned
products or parts. If the Controller will be replaced this limited warranty
shall apply to the replacement product for the remaining initial warranty
period, i.e. (three) 3 years from the date of purchase of the original
product.
RETURNS
All returns need to be done in the original packaging in order to avoid
damages of the product during transport. Defective products need to be
returned to factory or service shop for repair. Non-professionals DO NIOT open
the cabinet to prevent electric shock or damage to the equipment.
REGISTRATION
TroIMaster Agro Instruments Co., Ltd. will occasionally release updated
firmware for the HCS-2 Hydro-X Pro Environment Control System.
By registering your HCS-2 Hydro-X Pro Environment Control System on our
website www.trolmaster.com we can notify you when
an update is available.
We will not sell, rent or share your personal information.
WARNING : DO NOT allow the HCS-2 Hydro-X Pro Environment Control System to be exposed to water or excessive heat. DO NOT open or attempt to repair or disassemble the controller, as there are no user-serviceable parts inside. Opening the controller will void the warranty.
If the surface of HCS-2 Hydro-X Pro Environment Control System is dirty, wipe it with a dry towel. The HCS2 Hydro-X Pro Environment Control System operates under natural ventilation conditions.
SPECIFICATIONS
| Input Voltage | 100-240V-, 50/60Hz, 0.5A |
|---|---|
| Certifications | ETUFCC |
| Degree of Ingress Protection | I P20 |
| Max Number of HID Fixtures | 256’2 |
| Max Distance to Device to be connected | 1000 meters |
All-in-1 Pro Sensor (MBS-PRO)
Full Spectrum Quantum Sensor (MBS-PAR) Water Content Sensor (WCS-1)
| Maximum 50 sensors in combination
Device Stations| Maximum 50 devices in combination
Light Intensity Range| 0-2000PPFD
Moist Range| 0-100%
Temperature Range| 32-138.2 °F
Temperature Accuracy| ± 0.36°F
Temperature Deadband| 3°F(1-15)
Humidity Range| 5-95%
Humidity Accuracy| ±5%
Humidity Deadband| 3%(1-15)
CO2 Range| 0-250OPPM
CO2 Accuracy| ±(5% +30)PPM
CO2 Deadband| 5OPPM(10-250)
Working Environments| Temperature 32-122°F
Humidity 590%
ENVIRONMENTAL AND DISPOSAL CONCERNS:
THIS PRODUCT CONTAINSA BATTERYAND OTHER COMPONENTS WHICHMUST BE DISPOSED OF PROPERLY
This symbol displayed on a product, its accessories, or its packaging indicates that this product may not be discarded as household waste. Dispose of the equipment through a recycling center that handles electronics and electrical appliances. By disposing of the equipment in the proper and lawful way you will be helping to prevent possible damage to the environment and risk to public health.