ROCCAT Burst Pro Air Lightweight Wireless Optical Gaming Mouse User Guide
- June 9, 2024
- ROCCAT
Table of Contents
ROCCAT Burst Pro Air Lightweight Wireless Optical Gaming Mouse
PACKAGE CONTAINS
DEFAULT BUTTON ASSIGNMENT
(no driver installed)
STANDARD
-
Left mouse button
-
Right mouse button
-
Universal scroll
-
Scroll up
-
Scroll down
-
IE Forward
-
IE Backward
-
DPI Cycle
-
Connection mode slider
(2.4GHz/OFF/Bluetooth®) 10 = Profile cycle button -
Dongle storage
TECH SPECS BURST™ PRO AIR
- ROCCAT® Owl-Eye 19K dpi optical gaming sensor (based on PixArt PAW3370)
- ROCCAT ® Titan Switch Optical
- 100 million click lifecycle
- Adjustable lift-off distance
- 50g acceleration
- On-board memory
- 1.8m Phantom Flex™ charging cable
- 81g weight
- 1000Hz polling rate
- Default DPI Steps: 400, 800 (Default), 1200, 1600, 3200 400 IPS tracking speed
- Angle snapping: on/off
SYSTEM REQUIREMENTS
- Windows® 7 and above (software support)
- USB 2.0 (or higher)
- Internet connection (for driver software)
INSTRUCTIONS
- Plug the USB connector on your ROCCAT® Burst™ Pro Air into any free USB port.
- Boot your computer and connect to the Internet.
- Navigate to www.roccat.com/downloads and download the latest driver.
- Start the software installation process and follow the on-screen instructions
Should you need assistance …
Our support team is ready to help you with any technical questions. Just send
an e-mail to support@roccat.com or visit our
website at: WWW.ROCCAT.COM/SUPPORT
Disposal information
The crossed-out wheelie-bin symbol means that you must not dispose of this
product toge-ther with unsorted household waste. As electrical devices can
contain harmful substances which may cause environmental damage or harm to
your health if not disposed of correctly, please dispose of these products
separately. As the end user, you are required by law to dispose of used
electrical equipment at an official recycling point. For information about
local recycling points, contact your local authority, civic amenity site or
the business where you purchased this product. By disposing of electrical
products at an official recycling point, you are doing your bit to ensure
equipment is recycled correctly and professionally, and our environment is
protected.
When purchasing a new product, the retailer will let you hand in old products
and dispose of them free of charge provided the product you are handing in is
of a similar type and has the same functions as the product you are
purchasing.You can hand in small used electrical and electronic equipment
(measuring no longer than 25 cm on any one side) for free and with no
obligation to purchase a similar product at electrical and electronic retail
outlets with sales areas larger than 400m² or at nearby recycling points
designated by the retail outlet.
Wherever possible, remove any batteries before disposing of the device. Under
law, as a user you face the risk of penalties if you dispose of devices and
batteries illegally.
Technical support
Having technical problems with this product? Get in touch with our Support
team – the quickest way is via our website: www.roccat.com/support
Please keep this information for later reference.
FEDERAL COMMUNICATIONS COMMISSION (FCC) COMPLIANCE NOTICES
This section includes the following FCC statements for Burst Pro Air
- FCC ID: XGB-CM300D (Wireless Dongle); FCC ID: XGB-CM300 (Wireless Gaming Mouse)
- Class B Interference Statement
- RF Radiation Exposure & Hazard Warning
CLASS B INTERFERENCE STATEMENT
Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
This equipment has been tested and found to comply with the limits for a Class
B digi-tal device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not in-stalled and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC CAUTION:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF RADIATION EXPOSURE & HAZARD STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an
uncon-trolled environment. End users must follow the specific operating
instructions for satisfying RF exposure compliance. This transmitter must not
co-located or operating in conjunction with any other antenna or transmitter.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user‘s authority to operate this equipment.
INNOVATION, SCIENCE AND ECONOMIC DEVELOPMENT CANADA (ISED) COMPLIANCE
NOTICES
This section includes the following ISED statements for Burst Pro Air
- IC: 3879A-CM300 (Wireless Gaming Mouse); IC: 3879A-CM300D (Wireless Dongle)
- Class B Interference Statement
- RF Radiation Exposure & Hazard Warning
CANADIAN ICES STATEMENTS
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
RF RADIATION EXPOSURE & HAZARD STATEMENT
The product complies with Canada portable RF exposure limits set forth for an
uncontrolled environment and are safe for intended operation as described in
this manual. The further RF exposure reduction can be achieved if the product
can be kept as far as possible from the user body or set the device to lower
output power if such function is available.
EUROPEAN UNION AND EUROPEAN FAIR TRADE ASSOCIATION REGULATORY COMPLIANCE
DECLARATION OF CONFORMITY
Hereby, Voyetra Turtle Beach Inc. declares that Burst Pro Air is in compliance
with Directive 2014/30/EU(EMC), 2014/53/EU(RED), 2014/35/EU(Safety), 2015/863
amending Annex II to 2011/65/ EC(RoHS), 2012/19/EU (WEEE), 2006/1907/EU
(REACH), 94/92/EU
(PACKAGING), 2006/66/EU (Battery), Electromagnetic Compatibility Regulations
2016(EMC), Radio Equipment Regulations 2017(Radio), Electrical Equipment
Regulations 2016 (Safety), The Restriction of the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment Regulations 2012.
The full text of the EU/UK declaration of conformity is available at the
following internet address: http://www.turtlebeach.com/homologation
Radio frequency: 2400MHz
Operating frequency: 2400~2483.5MHz
Max. Output power: 10dBm
GENERAL SAFETY GUIDELINES AND INTENDED USE
- Do not open or modify the product.
- Not approved changes or modifications may void the operation authority and/or warranty.
- In case of trouble or doubt, contact us immediately.
- Keep the product away from fire/water/humidity/temperature extremes.
- Only use as intended with a compliant PC and connector part.
- Improper or incorrect use of the product or use of the product for purposes not recommended by the manufacturer void the liability and/or warranty.
- Don‘t look into the light beam on bottom of the mouse.
VOYETRA TURTLE BEACH, INC. | 44 SOUTH BROADWAY, 4TH FLOOR, WHITE PLAINS NY
10601, USA
© 2022 Voyetra Turtle Beach, Inc. All rights reserved. Any product names
mentioned in this manual may be trademarks or registered trademarks and are
the property of their respective owners. Information contained herein is
subject to change without notice. Voyetra Turtle Beach, Inc. shall not be made
liable for any errors that may appear in this manual. This publication or
parts of it may not be reproduced without the express consent of the
publisher.
ROCCAT® is a Turtle Beach Brand.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for anyother reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and the failure does not amount to a major failure.
https://www.roccat-neon.com/Bsmi
Customize your ROCCAT® product and keep it up to date with the latest software
and firmware
Download now for Windows® 7 and above at:
WWW.ROCCAT.COM/DOWNLOADS
Join the community
Become a ROCCAT member and register your product at: www.roccat.com/support
/register-your-product
Service & support
Easy access to customer support
Authenticity c heck: Make sure you own an original
Exclusive deals: Opt-in for special offers and downloads
Please use your product’s serial number (located on the bottom label)
WWW.ROCCAT.COM
References
- ROCCAT Support
- ROCCAT Support
- ROCCAT Support
- Turtle Beach Support
- 产å“è®¤è¯ - Product Certification
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>