KOHLER K-25042-SSL Modflex Adjust-A-Bowl Flushometer Bowl Installation Guide
- June 9, 2024
- Kohler
Table of Contents
Modflex® Adjust-a-Bowl®
Top spud antimicrobial flushometer bowl w/bedpan lugs
K-25042-SSL
Features
- Elongated bowl offers added room and comfort.
- Siphon jet.
- 1.28 or 1.6 gpf (4.8 or 6.0 lpf) depending on flushometer specified.
- 10-1/2″ x 7-1/2″ (267 x 190 mm) water surface.
- Minimal design detail and partially concealed skirt for ease of cleaning.
- Easy-to-clean low-profile bolt caps.
- Bedpan lugs included.
- Pair with KOHLER® flushometers and seats for a complete solution.
- Supports static load of 2,500 lbs.
- Antimicrobial finish inhibits the growth of mold-, mildew-, stain-, and odor-causing bacteria on the fixture surface. This product does not protect users against bacteria, viruses, or other disease organisms. Always clean and wash this product thoroughly before and after each use.
- 1-1/2″ (38 mm) top spud.
Material
- Vitreous china.
Technology
- Wall-to-floor toilet conversion solution, perfect for healthcare or any other facility interested in addressing load concerns.
- Eliminates need for a gut renovation to remove in-wall carrier and outlet and install new floor outlet.
- Adjustability allows toilet to attach to outlet of the horizontal branch, even if positioned next to the vertical stack.
- Engineered for strong flush performance in buildings with lower water pressure or flow.
- Design eliminates gas leaks, splashing and paper shredding.
Installation
- Floor-mount.
- Included brackets attach to wall carrier and secure bowl to both wall and floor.
- Designed to cover existing footprint of any wall bowl on the market.
- Adjustable connector enables replacement of wall-mount bowls with rim heights from 15″ to 18″.
Recommended Products/Accessories
K-4670-CA Lustra™ Commercial elongated toilet seat Included Components
Additional Components:
Brackets
Codes/Standards
ASME A112.19.2/CSA B45.1
DOE – Energy Policy Act 1992
EPA WaterSense®
California Energy Commission (CEC)
ADA
ICC/ANSI A117.1
CSA B651
OBC
KOHLER® One-Year Limited Warranty
See website for detailed warranty information.
Available Colors/Finishes
Color tiles intended for reference only.
Color
|
Code
|
Description
---|---|---
|
0
|
White
|
96
|
Biscuit
|
47
|
Almond
Technical Information
All product dimensions are nominal.
| Toilet type: | Flushometer, Floor-mount |
|---|---|
| Waste Outlet: | Wall |
| Bowl shape: | Elongated |
| Flush type: | Flushometer valve siphon |
| Spud size: | 1 1/2, Inlet, Top |
| Trap passageway: | 2-1/8″ (54 mm) |
| Water Consumption Full: | 1.6 gpf (6 lpf) |
| Reduced: | 1.28 gpf (4.8 lpf) |
| Water surface size: | 10-1/2″ x 7-1/2″ (267 mm x 191 mm) |
| Rim to water surface: | 5-3/4″ (146 mm) |
| Rough-in: | 5″ (127 mm) |
| Seat-mounting holes: | 5-1/2″ (140 mm) |
Fixture Supply Requirements
Min static pressure: 35 psi (241.3 kPa)
Notes
Install this product according to the installation instructions.
For back-to-back toilet installations: Use only a 45° double wye fitting.
This product is designed for a floor-mount installation with a wall-outlet.
ADA, OBC, CSA B651 compliant when installed to the specific requirements of
these regulations.
Plumbing codes may require elongated toilets and elongated, open-front seats
in public bathrooms.
Accessibility standards may require controls to be located on the open side of
the toilet.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product
specifications.
For the most current Specification Sheet, go to
www.kohler.com.
3-23-2022 05:04 – US/MX