SecuGen SG1-0300B-001 Hamster Air Touchless Fingerprint Reader User Guide
- June 12, 2024
- SecuGen
Table of Contents
SecuGen SG1-0300B-001 Hamster Air Touchless Fingerprint Reader
Product Information
The Hamster AirTM is a fingerprint reader device designed for biometric authentication. It is equipped with a plastic film that needs to be removed before use. The device has a red tab that needs to be pulled up and discarded. For more detailed instructions, please refer to the Hamster Air User Guide.
USING INSTRUCTION
- Remove plastic film
- Pull up on red tab
- Discar
For more complete instructions, please see the Hamster Air User Guide.
How to use
- Place your finger into the center of the reader
- Keep your finger flat, straight and centered Enrollme
- Slowly lower your finger until you get a large, clear fingerprint
Matching: Slightly raise or lower your finger until you get a match
How to clean
- Find tab at bottom
- Press tab and squeeze
- Press panel at same time
- Slide out front panel
- Wipe glass with cloth
- Replace front panel
© 2021 SecuGen Corporation. All rights reserved. SG1-0300B-001
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>