MAXIM 57413 Diverse 6 Inch LED Flush Mount 3000K Installation Guide
- June 9, 2024
- MAXIM
Table of Contents
MAXIM 57413 Diverse 6 Inch LED Flush Mount 3000K
Before Getting Started
-
Read the instructions carefully prior to assembling the product.
-
When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside.
-
Carefully remove all packaging materials and retain for future use.
-
Keep all hardware parts and packaging out of reach of small children.
-
Choose a clean, level, spacious assembly area.
Avoid hard surfaces that may damage the product. -
Ensure that you have all required contents for complete assembly.
-
Take care when lifting. Assemble the product in close proximity to where you intend to position the item.
-
Do not over tighten the screws and bolts as this may damage the threads.
-
Do not let children playwith this product.
Risk of suffocation!
Keep any packaging materials away from children.
Lamp Care Instructions
- Carefully read through the instruction sheet before assembly and using the product.
- Caution there is a risk of shock. Disconnect from power source before assembling or cleaning.
- Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
- Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
- Do not plug the product in if cord is torn or frayed.
Cleaning & Maintenance
-
On polished finishes, often using talc powder reduces the appearance of fingerprints and other smudges.
-
For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, acrylic polish, and wood polish.
-
Clean with soft cloth and a mild detergent.
DO not use abrasive cleaner. -
Periodically (every 90 days) make sure that the screws are fully tightened.
-
Prolonged exposure to heat sourcesmay cause glazing, melting and scorching, or even cause color to fade.
CONTENTS
Before getting, started, ensure the package contains the following components:
INSTALLATION INSTRUCTIONS
- Prior to installation, install the mounting bracket on the junction box with mounting screws. Drive screws completely to the end of the junction box.
- Connect supply wires to wires on fixture with wirenuts. Connect white to white, black to black and green wire to green wire as grounding connection.
- Rotate to open the shade and install the fixture to the mounting bracket with screws then install the shade to complete the installation.