Yale YD-ACCESSKIT Handy Hints Installation Guide
- June 9, 2024
- Yale
Table of Contents
Yale YD-ACCESSKIT Handy Hints
DOWNLOAD YALE ACCESS APP
The app requires a minimum operating system of iOS 11 Plus for iPhone, and 8
Plus for Android based phones. Bluetooth 4.0.
iOS SYSTEM : Once you have the app you can press and hold on the app to
share the app to other iphone users.
IMPORTANT!
- Always set up a master code at the face of the lock before pairing with the app
- When downloading the app there is a dual authentication process required and as part of this you will be sent a text message with a code in it and then you will be sent an email with code in it
- Always make sure that you set up your phone with the lock and don’t try to install and set up the Connect Wi-Fi Bridge first – THIS WON’T WORK
ANDROID SYSTEM : For an Android based phone you will need to search for
the app in the Google app store, you can save a link to this store in your
favourites.
IMPORTANT!
- Always set up a master code at the face of the lock before setting up the app
- With Android phone this text message number will auto populate – it’s easy to miss this step and you will be trying to put the text number where the email number should go. Read carefully and take your time! (When downloading the app there is a dual authentication process required and as part of this you will be sent a text message with a code in it and then you will be sent an email with code in it )
- Always make sure that you set up your phone with the lock and don’t try to install and set up the Connect Wi-Fi Bridge first – THIS WON’T WORK
SET UP YALE ACCESS MODULE
- Wi-Fi bridge cannot be registered until the module registration is complete.
- Make a note of the serial number beforehand, as you may need to use this if the QR code doesn’t register or you want to set this up manually
Your Yale Access app should look like this once you have logged into your
account for the first time.
IMPORTANT!
- The serial number always uses zero’s not the letter “O” (See pic ‘M13S0C1UR’)
- Always remove at least one battery before inserting the module (This step allows the lock to recognize the Network Module and begin the pairing)
If you don’t remove a battery before inserting the module, only the numbers 1 to 6 will show
Scan the QR code
IMPORTANT!
*Please note that the QR Code may not always work when you scan it. Therefore, please click on “My product has no QR Code” at the bottom of the screen and follow the steps using the Module code you have written down before plugging in the module.
Alternatively
Open the app and go to the tab at the top left of the home page, once in here press on “SET UP A DEVICE”
TROUBLE SHOOTING
IMPORTANT!
If your module does not register successfully and you end up with the
following error message:
SOLUTION!
Simply wake up the keypad with the palm of your hand; Enter in your Master
Code, followed by the Gear key > Press 7 then Gear key > Tap the back red
arrow two times (located above the number 3 on the keypad)Now hit “Try Again”
on the app.
INSTALL DOORSENSE
Click here for full installation guide
-
Surface mount
DoorSenseTM
-
Flush mount
DoorSenseTM
IMPORTANT!
- The Door SenseTM always needs to be mounted in line with the module as per the image above.
Once the DoorSenseTM is installed you will need to complete the set up using the app.
-
Step 1
Go to the lock that you have Door Sense installed next to it. -
Step 2
Go to ‘Lock Settings’
-
Step 3
Go to ‘DoorSense’ under Automation -
Step 4
Select ‘Enable DoorSense’
NOTE: If you want to add DoorSenseTM later or you have moved past the prompt you can go into the ‘lock settings’ and go through the DoorSenseTM set up.
INSTALL CONNECT WI-FI BRIDGE
Install the Connect Wi-Fi Bridge if you wish to extend the range from
Bluetooth to remote access. Please note that before you set it up, make sure
your phone is connected to the WiFi using 2.4GHZ*.
Note: Only 2.4GHZ will work with Yale Access
The app will prompt you to set up a ‘Wi-Fi bridge’ once you have registered
the module.
Alternatively
Open the app and go to the tab at the top left of the home page, once in here
press on “SET UP A DEVICE”
Scan the QR code (or enter the code as circled), then plug the bridge into a power socket within BLE range of the lock. Follow as instructed by the Yale Access app.
IMPORTANT!
- You won’t be able to make the connection if you are using 5GHZ, but you can change back to 5Ghz once the bridge has been connected.
- The “signal appears to be weak” doesn’t affect the bridge’s performance, continue past this point until the set up is finished.
Yale is trusted by millions of people every day to keep what’s important to them safe.
Our innovations have protected their homes, families and belongings for over
180 years.
We have expanded from being a leader in mechanical lock engineering to
innovating connected smart locks and homes. Because we always make every
effort to push the boundaries in a changing world.
We were there for your grandparents (and probably theirs) and we’ll be there for your children.
ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience.
Trusted Everyday
ASSA ABLOY New Zealand Limited
6 Armstrong Road, Albany
Auckland 0632, New Zealand
www.yalehome.com/nz
For customer feedback:
nzsales@assaabloy.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>