MAXIM 58740 Wafer 22 Inch RD LED Surface Mount 4000K Installation Guide
- June 9, 2024
- MAXIM
Table of Contents
MAXIM 58740 Wafer 22 Inch RD LED Surface Mount 4000K Installation Guide
Before Getting Started
- Read the instructions carefully prior to assembling the product.
- When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside.
- Carefully remove all packaging materials and retain for future use.
- Keep all hardware parts and packaging out of reach of small children.
- Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
- Ensure that you have all required contents for complete assembly.
- Take care when lifting. Assemble the product in close proximity to where you intend to position the item.
- Do not over tighten the screws and bolts as this may damage the threads.
- Do not let children play with this product.
- Risk of suffocation!
Keep anypackaging materials away from children.
Contents
Before getting,started, ensure the package contains the following components:
A| 
| X1
---|---|---
B| | X1
C| | X2
D| | X3
E| | X8
F| | X8
G| | X2
H| 
| X1
Lamp Care Instructions
- Carefully read through the instruction sheet before assembly and using the product.
- Caution there is a risk of shock. Disconnect from power source before assembling or cleaning.
- Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
- Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
- Do not plug the product in if cord is torn or frayed.
Installation Instructions
-
Connect the wires with wirenuts. Connect white to white, black to black and green wire to green wire as grounding connection. Fix the driver on the junction box.
-
Fix the mounting plate to the driver, align with the slot, push upward and rotate to install.
-
Screw the installation plate on the ceiling by using the screws and expansion anchor bolts (No need in Wooden Board).
-
Install the fixture on the mounting plate, align with the clamping position, push upward and rotate to install.
Cleaning & Maintenance
- On polished finishes, often using talc powder reduces the appearance of fingerprints and other smudges.
- For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, acrylic polish, and wood polish.
- Clean with soft cloth and a mild detergent. DO not use abrasive cleaner.
- Periodically (every 90 days) make sure that the screws are fully tightened.
- Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.
“LED driver must be installed inside junction box. See dimensions”
Documents / Resources
|
MAXIM 58740 Wafer 22 Inch RD LED Surface Mount
4000K
[pdf] Installation Guide
58740 Wafer 22 Inch RD LED Surface Mount 4000K, 58740, Wafer 22 Inch RD LED
Surface Mount 4000K, LED Surface Mount 4000K, Surface Mount 4000K
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>