TOBENONE USB-C Triple Display Docking Station User Guide
- June 9, 2024
- TOBENONE
Table of Contents
TOBENONE USB-C Triple Display Docking Station
Thank You
Thank you for your purchase of the Tobenone Triple-Display Docking Station
UDS-015D.Our dock provides the ability to connect three monitors through two
HDMI and one VGA inter face,SD&Micro SD Card Reader,3.5mm Audio &Microphone,
USB-A 3.0, USB-C PD3.0.RJ45 Gigabit Ethernet to your USB C laptop via one USB
C cable.
Ports and Components
Front
-
1. USB-C: connect to host
-
2. LED indicator
-
3. SD Micro SD Card Reader
Read: 50-104MB/s, Write: 30-80OMB/s. (Data transfer rates are subject to the speed of the memory card itself and your computer’s USB ports.) -
4. 3.5mm Audio & Microphone
-
5. USB-A 3.0 (data downstream charge]: 5Gbps, V/0.9A 4.5W
Back
-
6. HDMI 1:
4Kx2K 60Hz/ 3840×2160 (work separately while source is DP1.4)
4Kx2K 30Hz / 3840×2160 (work separately while source is DP1.2) -
7. HDMI 2: 4K@30Hz Driver-based
-
8. VGA: Up to 1080P 60Hz. Driver-based
-
9. USB-C PD3.0: Upstream charging the source devices such as Laptop/Notebook, charging limited to 87-96W for safety and affected by different firmware.
Support 100W power adopter -
10. RI45 Gigabit Ethernet: 1000Mbes
HDMI 1+HDMI 2+VGA
- Step 1: Connected one end of the USB C cable to the attached power supply the other end connects to the PD port( Port9)
- Step 2: Connect the provided USB C to USB C cable to the dock(Port 1) and laptop
- Step 3: Connect monitors to the dock via HDMI1 (Port6]/HDMI2Port7)}/vGA/Port8). cables are not included
- Step 4: Install initiate InstantView to display:
- Firstly, connect the docking station to the laptop via USB C cable, and you will see a disk named “INSTANT View
- Double click and open the file, according to your system choose the proper application and complete the driver installation within seconds
- For macOS, the app will require a screen recording permission to capture pixels and send them to your external monitors: Apple Menu-> System Preference-> Security Privacy->select “Privacy” tab->scroll to find “Screen Recording” and check “macOS Instant View NOTE: The INSTANVIEW app doesn’t store or record any screen content.
- Click Instant View APP, and it will enable external displays immediately.
- Step 5: Attach US83.0 devices to the front US83.0 Port(5).insert SD card,TF/I Micro SD card into SD/TF slot(Port3)
- Step 6: Connect speaker/headphone or microphone to the front audio port(Port4).Connect the Ethernet cable to RJ45 Ethernet port(Port10)
Troubleshooting
No Display output via HDMI1
- Please ensure your laptop’s USB-C port supports Power Delivery, DisplayPort, and Data transfer
- Please check if the connection between the monitors. Dock and laptop is tight
- Please use standard HDMI cable, HDMI to HDMI is recommended
NO audio output from monitor
- Please make sure your monitor supports audio output function
- Set tha external monitor as default audio aunt device
Any questions, we are here to help!
Email: support@tobenone.com
WhatsApp: 307-363-0735
Because the only question we can’t fix is the one we don’t know Free Upgrade
to 24-month warranty by visit
www.tobenone.com/warranty