ring Stick Up Cam Outdoor HD Wire-Free Security Camera Installation Guide
- June 9, 2024
- Ring
Table of Contents
ring Stick Up Cam Outdoor HD Wire-Free Security Camera
Step 1
Download the Ring App
The Ring app will walk you through setting up and managing your Stick Up Cam.
The Ring app is available for iPhone, iPad, Mac Desktop, Android, and Windows
10.
Search for “Ring” in one of the app stores above, or visit: ring.com/app
We have an online guide with videos and tutorials at: ring.com/setup
Step 2
Meet the Back of your Stick Up Cam
Setup Button – You’ll be instructed to push this during the in-app setup.
Power Port – If running off battery, charge Stick Up Cam fully before
installation by plugging the orange cable in here.
Status Light – This light will pulse when your Stick Up Cam is in setup mode.
Step 3
Perform the In-App Setup
Select the plus sign in the Ring app to set up a new device.
When prompted, select Stick Up Cam
Step 4
Test the Video Quality Before mounting your Stick Up Cam let’s run a quick test. Double press the orange button. This will send an alert to your mobile device.
Step 5
Select the Mount You’d Like to Use You have two mounts to choose from. There’s the Quick Release Mount and the Security Mount.
Step 6
Remove the Swivel Arm from the Security Mount
A) Loosen the bolt on the side.
B) Remove the bolt completely to set the swivel arm free and set this
screw aside for now.
Step 7
Step 7 Select the Mounting Point
Step 8
Attach the Swivel Arm to your Stick Up Cam
Use the provided bolt to attach the swivel arm to the mounting point you
selected in the previous step.
Step 9
Install the Mount
Take everything to where you’ll be installing your Stick Up Cam.
If you’re installing on stucco, brick or concrete, use the quick release mount
as a template to mark the location of 4 holes that you’ll drill in the next
step.
On woo d or siding, skip this part, and screw the bracket directly into your
wall.
On stucco, brick, or concrete use the provided drill bit to drill the 4 holes that you marked in the previous step. Then insert the wall anchors.
Use the Phillips head side of the Ring screwdriver and the provided screws to screw in the bracket you selected in step
Step 10
Attach Your Stick Up Cam to the Security Mount
Use the bolt you set aside in step 6 to attach the camera to the security
mount.
Step 11 (if using the quick release mount)
Snap Your Stick Up Cam into the Quick Release Mount
Push gently down on the tab and snap your Stick Up Cam into place.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>