AirLive W6-184QAX Wi-Fi 6 1800Mbps Easy MESH and VPN Dual Bands Gigabit Router Instructions
- June 9, 2024
- airlive
Table of Contents
AirLive W6-184QAX Wi-Fi 6 1800Mbps Easy MESH and VPN Dual Bands Gigabit Router
Setup your Main Router
Please check the following default settings, if unable to find the wireless
signal from your cellphone.
Please connect PC to router and setup
- Default IP address : 192.168.10.1
- Default SSID : (refer to device)
- Default SSID2: (refer to device)
- Default WIFI Password: 123456789
- Default login password : admin
In the Revolve Mesh bundle there are 2 devices, they are marked “Main” and “Agent”. Please use the device marked “Main” as the device which is connected via its WAN port to your Modem.
Do not connect the WAN port of the “Agent” device.
Connect to Wi-Fi
Please make sure your iOS/Android or tablet connect to the router. Make sure the “Main” device is powered on.
Login
Open your phone or tablet web browser and type http://192.168.10.1
And enter the default password
Internet Setup
First time login the system will ask you to run the wizard for the internet connection and wireless setting, the Mesh Setup is already pre-configured.
After the wizard is finalized, your router is ready for use.
Mesh Setup
The Revolve Mesh bundle is pre-configured. When both the “Main” and “Agent” device are turned on the blue Mesh LED on both device will be solid.
MESH LED Indicator: Blue
Mesh is connected normally.
Status: On
Mesh connecting.
Status: Blinking
Mesh is disabled or not connected.
Status: Off
Customer Support
For more detailed information see the user guide or visit
www.airlive.com
