Yookidoo 8L Leaflet Bath Toys Instructions

Yookidoo 8L Leaflet Bath Toys

INSTRUCTION LEAFLET

Please read and retain for future reference.
Automatic play spout attaches to the tub and offers a variety of ways to celebrate discovery.
Contents:
1x tap • cup holder • 3x tumblers

CAUTION

• Take special care to ensure batteries are inserted correctly, observing (+) and (-) marks on battery and product
• Removal and replacement of batteries should be carried out by an adult or under adult supervision
• Do not attempt to recharge non-rechargeable batteries
• Rechargeable batteries must be removed from product before recharging
• Removal and recharging of rechargeable batteries should be carried out by an adult or under adult supervision
• Avoid short-circuiting the contacts in the battery compartment or the battery terminals
• Remove exhausted batteries from product
• Do not mix old (used) and new batteries or batteries of different types, eg. rechargeable alkaline or batteries of a different make/brand
• Do not attempt to power battery products by the introduction of mains supply or separate power supplies, and do not attempt to plug any part of this product into the mains supply
• Dispose of exhausted batteries safely, and never dispose of batteries in a fire
• Remove batteries from product after use or if storing for long periods
• Periodically examine product for signs of damage to electrical parts and do not play with until damage has been properly examined
• Only use batteries of the same or equivalent type to those recommended
• Please retain the above information for future reference.

Use of rechargeable batteries is not recommended for this product

• To avoid the risk of entanglement keep motorised parts away from children’s hair.
• Discard all packaging and fasteners before giving toy to child.
• After use, rinse well in clear water to remove soap residue, and allow to drain.
• Styles and colors may vary.
• Warning: Never leave a child unattended in a bathroom or a bathtub without adult supervision. Always test water temperature before placing child in bath.
• Cleaning the Filter should be handled by an adult.

FCC STATEMENT

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for Class B digital devices pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference to radio communications, this equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this toy does cause interference to radio or television reception (you can check this by turning the toy off and on while listening for the interference), one or more of the following measures may be useful:

• Reorient or relocated the receiving antenna
• Increase the separation between the toy and the radio or the TV
• Consult the dealer or experienced TV-radio technician for help.

NOTE: Changes, adjustments or modifications to this unit, including but not limited to, replacement of any transmitter component (crystal, semiconductor, etc.) could result in a violation of FCC rules under part 15 and/or 95 and must be expressly approved by Spin Master LTD. or they could void the user’s authority to operate the equipment. Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.

REPLACING THE BATTERIES

Always ensure the product is dried thoroughly before replacing batteries and that the battery compartment is completely sealed and water tight before using again.
To insert the batteries, unscrew the battery compartment cover 1 (on the back of the spout unit) with a cross head screwdriver and insert 3 x 1.5v AA (LR6) batteries, as shown ensuring correct polarity 2 . Replace battery cover and screw firmly into position.

ASSEMBLY

Wet the suction cups and attach them to the side of the bathtub, keeping the lower suction cup as close as possible to the bottom 3 . Fill the bath with water, ensure the pump unit is fully submerged . 4

CLEANING THE FILTER

The filter should be cleaned every time the batteries are replaced. Unscrew the filter 5 and pull it out 6 . Wash with soap and water, ensuring that the filter mesh is completely open.
Make sure propeller is also clean and spins freely 7 . Reposition the filter and screw it back.

HOW TO PLAY

To help your child become familiar
with the toy, we suggest parent and
child play with it together at first. Automatic play spout offers many ways to play!
Kids can turn the spout on and of just by pressing the face 8 . Use three different activity tumblers to play with the water as it falls: Create a shower with one tumbler 9 , turn
the propeller with the second tumbler 10 . The third tumbler features a hidden friend inside who floats to the surface when filled with water – peek-a-boo! 11 Playing with
each of the three different tumblers teaches cause and effect and introduces children to concepts such as full/empty, heavy/light, floating/sinking. Swiveling arm holds
the tumblers and can be placed directly under the stream or pushed off to the side. The spout swivels too.

References

• Bathtub Toys for Babies | Yookidoo, celebrating discovery

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>