velleman MK103 Sound-To-Light Unit User Manual
- June 9, 2024
- Velleman
Table of Contents
velleman MK103 Sound-To-Light Unit
MK103
- Resistor
- RR1: 10K
- (Brown, Black, Orange)
- R2: 330K
- (Orange, Orange, Yellow)
- R3 … R5 : 100K
- Brown, Black, Yellow)
- R6 … R9 : 47E
- (Yellow, Purple, Black)
- R10 … R12 : 1M5
- (Brown, Green, Green)
- R13, R14 : 47K
- (Yellow, Purple, Orange)
- LED
- Transistor
- Ceramic capacitors
- Electrolytic capacitors
- Horizontal Trimmer
- Microphone
MK102
- Resistor
- R1, R2 : 1K
- (Brown, Black, Red)
- R3, R4 : 10K
- (Brown, Black, Orange
- Trimmer
- Transistor
- LED
- Electrolytic capacitors
- Battery snap
HOW TO SOLDER?
- Wipe tip
- Insert part against PCB
- Insert part against PCB
- Bend leads
- Heat part lead & PCB pad
- Apply solder
- Correct joint
- Cut close to PCB
- Inspect
Bad solderings
- Too little solder
- Too much heat
- Bad contact
- Too much solder
not included
Documents / Resources
|
velleman MK103 Sound-To-Light
Unit
[pdf] User Manual
MK103 Sound-To-Light Unit, Sound-To-Light Unit, MK103 Light Unit, Light Unit,
MK103
---|---
|
VELLEMAN MK103 Sound To Light
Unit
[pdf] Instructions
MK103 Sound To Light Unit, MK103, Sound To Light Unit, To Light Unit, Light
Unit, Unit
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>