BRESSER 0510540 Digital Camera Instruction Manual

: June 9, 2024
: BRESSER

Table of Contents

BRESSER 0510540 Digital Camera Instruction
Imprint
Validity note
General safety instructions
Parts overview and scope of delivery
Installing the software and drivers
Camera mounting on telescope
Cleaning and maintenance
Warranty
Technical data
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BRESSER 0510540 Digital Camera Instruction

Imprint

Bresser GmbH Gutenbergstr. 2 46414 Rhede Germany www.explorescientific.de For any warranty claims or service inquiries, please refer to the information on “Warranty” and “Service” in this documentation. We ask for your understanding that unsolicited returns cannot be processed. Errors and technical changes excepted. © 2022 Bresser GmbH All rights reserved. The reproduction of this documentation – even in extracts – in any form (e.g. photocopy, print, etc.) as well as the use and distribution by means of electronic systems (e.g. image file, website, etc.) without the prior written permission of the manufacturer is prohibited. The designations and brand names of the respective companies used in this documentation are generally protected by trade, trademark and/or patent law in Germany, the European Union and/or other countries.

Validity note

This documentation is valid for the products with the following article numbers: 0510540

Manual version: 1022
Manual designation:
Manual_0510540_DeepSky-Astro-Kamera-26MP_en-de_EXPSC_v102022a
Always provide information when requesting service.

About this Instruction Manual

NOTICE

These operating instructions are to be considered a component of the device.
Read the safety instructions and the instruction manual carefully before using this device.
Keep these instruction manual in a safe place for future reference. If the device is sold or passed on,
the instruction manual must be passed on to any subsequent owner/user of the product.

Intended use

This device is not intended for use by persons (including children) with impaired physical, sensory or mental abilities, or for lack of experience and/or knowledge, unless they are supervised by or have received instructions from a person responsible for their safety on how to use this device.
This device is for personal use only.
The device was developed as an electronic accessory and may only be used to connect and operate the devices for private use described in this manual.

General safety instructions

DANGER

Risk of an electric shock!
This device contains electronic parts that are powered by a power source (AC adapter and/or batteries). Improper use of this product may result in electric shock. Electric shock can cause serious or fatal injuries. It is therefore imperative that you observe the following safety information\

Check this device, cables and connections for damage before use.
Never use the device with defective or damaged components (e.g. housing, cable, lamp, etc.).
Do not expose the device to high temperatures. Use only the supplied AC adapter. Do not short-circuit the device or batteries or dispose of in fire! Excessive heat and improper handling can cause short circuits, fires and even explosions!
Operate the device only in a completely dry environment and do not touch the device with wet or damp body parts.
Place your device so that it can be disconnected from the power supply at any time. The power outlet should always be near your appliance and should be easily accessible, as the plug of the power cord serves as a disconnect device from the mains supply.
To disconnect the unit from the mains, always pull the mains plug and never pull the cable!
Disconnect the power supply by pulling the mains plug when the appliance is not in use, in case of a longer interruption of operation and before any maintenance and cleaning work.

DANGER

Risk of blindness!
Never use this device to look directly at the sun or in the direct proximity of the sun. There is a risk of BLINDNESS

NOTICE

Danger of material damage!
Improper handling may result in damage to the unit and/or accessories. Therefore, use the device only in accordance with the following safety information.

Do not disassemble the device! In the event of a defect, please contact your dealer. They will contact the Service Center and can arrange the return of this device for repair if necessary.
For the normal operation as intended, only use the supplied cables and connect them as described in the manual.

NOTICE
Risk of voltage damage!
Only use the included power adapter for power supply! The use of other unsuitable power sources or those not authorized by the manufacturer may result in damage to the camera and will void the warranty.

Parts overview and scope of delivery

BRESSER-0510540-Digital-Camera-
Instruction-FIG-2

Illustration 1: All parts of the Astro camera with rear view (connection area)

Camera housing
Ventilation slits
Holding thread
USB 2.0 socket (2x USB HUB)
USB 3.0 socket (1x)
Connection socket for DC barrel connector
PWR function light (power supply of theN camera established)
SYS function light (USB connection established)
TEC function light (cooling system enabled)
FAN function light (fan enabled)
T2 adapter (50,8mm/2″ plug diameter)
Connection thread
Mains power cable with Euro plug and C13 coupling
Mains power adapter 12V/3A with power cable, DC barrel connector and C13 connection socket
Power cable extension with barrel connector coupling and DC barrel connector
USB 3.0 connection cable (connection to computer)

Scope of delivery:
Camera (A); ); T2 adapter (B); power adapter (C); power cable (D); power cable extension (E); USB 3.0 connection cable (F); software CD; hardcase

Also required (not included):
Computer running Windows 8/10

Installing the software and drivers

Insert the supplied CD-ROM into the CD drive of your computer. Alternatively, you can download the software package from the product page and start the installation directly. The files are stored under the category ‘Software’. The link/QR code to the product page can be found on the second page of this manual.
Install the ‘EXPLORE Capture’ software. This will also install the camera drivers automatically.
Remove the rubber cover of the CMOS sensor on the camera and connect it to your telescope. The connection can be made directly via T2 thread (M42x0.75mm) or via 2″ (50.8mm) plug-in adapter. Always ensure that the camera is securely attached.
Connect the supplied AC adapter to the camera.
Connect the camera to the computer. Use the USB 3.0 connection cable and a corresponding free USB 3.0 interface on the computer for this purpose.
Start the EXPLORE Capture software after successful installation.
Select the connected camera in the EXPLORE Capture software menu.
The camera now continuously sends live images to the computer at the current exposure time.
Use the telescope viewfinder to adjust and focus on a bright star in the field of view of the camera. To obtain a faster frame rate and a higher camera sensitivity during focusing, switch to binning mode if necessary (see software menu “Digital Binning”).
After successful focusing, you can start recording images or video sequences.

Camera mounting on telescope

BRESSER-0510540-Digital-Camera-Instruction-FIG-4

Camera housing
Holding thread
Connection thread
50.8mm (2″) T2 adapter
50.8mm (2″) eyepiece holder
Eyepiece extension

Using the internal USB HUB (USB 2.0)

The camera is equipped with an built-in USB HUB with 2x USB 2.0 sockets at the rear. This can be used to connect additional components (e.g. autoguider camera, motor focus etc.). Separate cable connections of the accessories to the computer are omitted.

NOTICE! The use of short cable connections is recommended to reduce the risk of ‘cable spaghetti’ and cable breakage.

Camera mounting with optional autoguider

Autoguider camera1
ST4 connecting cable
USB 3.0 connecting cable
Guiding scope1
Telescope1
ST4-capable mount1
Control panel of the mount1
ST4 socket on control panel1
Deep Sky Astro Camera
Computer1
USB 3.0 socket on the camera
USB 2.0 socket on the camera
USB 2.0 connecting cable1

NOTICE! This is not a stand-alone camera. A computer with Windows operating system is required for both, photography and autoguiding.

Cleaning and maintenance

Before cleaning the device, disconnect it from the power supply (remove plug or remove batteries)!
Only clean the device externally using a dry cloth. Do not use cleaning solution to prevent damage to the electronic parts.

Disposal

Dispose of the packaging materials according to its type. Information on proper disposal can be obtained from the municipal waste disposal service provider or environmental agency. Do not dispose of electronic devices in the household garbage! According to the European Directive 2012/19/EU on Waste Electrical and Electronic Equipment and its transposition into national law, used electrical equipment must be collected separately and recycled in an environmentally sound manner.

EC declaration of conformity

A “Declaration of conformity” in accordance with the applicable directives and corresponding standards has been prepared by Bresser GmbH. The full text of the EC declaration of conformity is available at the following Internet address: www.bresser.de/download/0510540/CE/0510540_CE.pdf

UKCA declaration of conformity

A “Declaration of Conformity” in accordance with the applicable directives and relevant standards has been issued by Bresser GmbH The full text of the UKCA Declaration of Conformity is available at the following web address: www.bresser.de/download/0510540/UKCA/0510540_UKCA.pdf Bresser UK Ltd. • Suite 3G, Eden House, Enterprise Way, Edenbridge, Kent TN8 6HF, Great Britain

Warranty

The regular warranty period is 2 years and starts on the day of purchase. For full warranty terms and services, please visit www.bresser.de/warranty_terms.