3e Electronics Bluetooth 5.2 Earbuds B208 User Manual
- June 5, 2024
- 3e Electronics
Table of Contents
Electronics Bluetooth 5.2 Earbuds B208
User Manual
TURNING ON YOUR EARBUDS
METHOD 1: Remove your earbuds from the charging case.
METHOD 2: If the earbuds are not inside the charging case or turned off,
touch the RIGHT or LEFT earbud for 5 seconds until the blue LEDs flicker and
you hear “Power On”.
TURNING OFF YOUR EARBUDS
METHOD 1: Place your earbuds back into the charging case.
METHOD 2: Touch your earbuds for 5 seconds until you hear “Power OFF”.
BLUETOOTH PAIRING INSTRUCTIONS
FIRST: Remove both earbuds from the charging case. They will auto-pair to
each other.
SECOND: Keep the earbuds within 3 feet of your smart device (for
Bluetooth pairing only.) Enable your device’s Bluetooth function from its
Settings menu. Select “RT60” from the Bluetooth device list to pair the
earbuds to your device.
Once paired, you will hear “Device Connected:’
Your SoundPlay earbuds are now ready to use!
SINGLE EARBUD USAGE
Each earbud can be used independently.
CALLING/MUSIC
ANSWER/END CALL
Touch RIGHT or LEFT earbud 2 times
REJECTING A CALL
Touch and hold RIGHT or LEFT Earbud for 2 seconds until you hear a prompt
sound
PLAY PAUSE
Touch RIGHT or LEFT earbud 2 times
NEXT SONG
Touch the RIGHT earbud 3 times
REWIND/PREVIOUS SONG
Touch the LEFT earbud 3 times
VOICE ASSISTANT
Touch and hold RIGHT or LEFT earbud for 2 seconds until you hear a prompt
sound to activate the Voice Assistant/Siri function. This function may not
work for all devices.
CHARGING THE EARBUDS
When the earbuds are low in power, you will hear “Battery Low”. Place the
earbuds into their respective slots in the charging case. They will
automatically begin to charge. The LEDs will turn solid red while charging.
The LED on the bottom of the case will turn white. Once fully charged, the
LEDS on the earbuds and the bottom of the case will turn off.
Make sure to fully charge the earbuds prior to the first use.
CHARGING THE CASE
Plug the standard USB-C charging cable into the port on the case and connect
the USB head to a USB power source, such as an AC wall adapter or computer.
The LED will turn red while charging. Once fully charged, LED will turn off.
IMPORTANT SAFEGUARDS
- Do not use this unit for anything other than its intended use.
- Keep the unit away from the heat sources, direct sunlight, humidity, water, or any other liquid.
- Do not expose the device to extremely high or low temperatures, as it may damage the battery.
- Do not operate the unit if it has been wet or moist to prevent electric shock and/or injury to yourself and damage to the unit.
- Do not use this unit if it has been dropped or damaged in any way.
- Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk.
- Keep this unit out of reach of children
- This unit is not a toy.
CUSTOMER SUPPORT
If you have any questions about your product we are here to help. Call or email us and a representative will be happy to assist you: 1-855-GO-TZUMI or [email protected]
SPECIFICATIONS
Bluetooth Technology: Version 5.2
Battery (Earbuds): 35 mAh (x2); 3.7V
Battery (Charging Case): 500 mAh; 3.7V
Input Power Supply: 5V/0.4A
Earbuds Charging Time (Est): approx 1.5 hr
Charging Case Time (Est): approx 2 hrs
Music Playback Time: approx 6.5 hrs
Frequency: 20Hz-20KHz
BATTERY DISPOSAL:
This product contains a lithium polymer battery. Lithium polymer batteries
are environmentally safe when fully discharged. Please refer to your local and
state laws for battery disposal procedures.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements in
portable exposure conditions without restriction.
Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.