BLAUBERG Iso-Primo Sound-Insulated Inline Mixed-Flow Fans Instruction Manual

June 9, 2024
BLAUBERG

BLAUBERG logo Iso-Primo Sound-Insulated Inline Mixed-Flow Fans
Instruction ManualBLAUBERG Iso-Primo Sound-Insulated Inline Mixed-Flow
Fans Iso-Primo
Sound-insulated inline mixed-flow fans

Iso-Primo Sound-Insulated Inline Mixed-Flow Fans

Use
Supply and extract ventilation systems installed in various premises with high requirements to the noise level.
For ventilation air ducts requiring high pressure, powerful air flow and low noise level.
Compatible with ∅ 200 up to ∅ 250 mm air ducts.
BLAUBERG Iso-Primo Sound-Insulated Inline Mixed-Flow Fans - fig
4 Design

  • The casing is made of galvanized steel, internally filled with 30 mm acoustic foam.
  • Due to the conically shaped polymer impeller with specially profiled blades, the air stream circular velocity increases, which results in higher air flow and pressure, as compared to characteristics of standard axial fans
  • Mixed-flow impeller made of high-quality plastic.
  • The specially designed diffuser, impeller and airflow rectifier at the fan outlet provide smooth air flow distribution and enable the best combination of high capacity, powerful
  • pressure and low noise.
  • External airtightterminal block on the fan casing for power supply.
  • Mounting brackets on the fan casing for mounting to the ceiling.

BLAUBERG Iso-Primo Sound-Insulated Inline Mixed-Flow Fans - fig
3

Motor

  • Three-speed single-phase high-efficient motor with low energy demand on ball bearings.
  • All motors have manual reset thermal overload protection.
  • Motor ingress protection rating IPX4.

Speed control

Speed selection with a built-in speed switch (US option) or an external multi- speed controller (specially ordered accessory).
Smooth speed control is possible either with an external thyristor or transformer speed controller (specially ordered accessory) when connected to the maximum speed terminal.

Mounting

The fan is suitable for mounting in any section of the ventilation system from intake to the end of the ductwork.
Ceiling mounting with a special mounting plate on the fan casing.

Modifications and options

T: turn-off delay timer adjustable from 2 to 30 minutes.
US : three-position speed switch.
G1: speed controller, temperature controller with external temperature sensor (cable length 4 m), power cable with mains plug.
GI1 : speed controller, temperature controller with integrated temperature sensor and power cable with mains plug.
The G1 and GI1 modifications enable automatic speed control depending on indoor temperature. The optimal ventilation solution for premises requiring permanent temperature control as greenhouses, orangeries, etc.
W: power cable with mains plug.
Designation key

Series Duct diameter [mm] Options
Iso-Primo 200; 250 T: turn-off delay timer adjustable from 2 to 30 minutes

US: three-position speed switch
G1: speed controller, temperature controller with external temperature sensor, power cable with mains plug
GI1: speed controller, temperature controller with integrated temperature sensor and power cable mains plug
W: power cable with mains plug

Accessories BLAUBERG Iso-Primo Sound-Insulated Inline Mixed-Flow Fans -
fig 1 BLAUBERG Iso-Primo Sound-
Insulated Inline Mixed-Flow Fans - fig 2

Overall dimensions [mm]

Type ∅ D ∅ D1 H L L1 Weight [kg]
Iso-Primo 200 (T, GI1, G1, W, US, USW) 198 281 339 601 739 8.2
Iso-Primo 250 (T, GI1, G1, W, US, USW) 249 337 389 601 739 9.5

BLAUBERG Iso-Primo Sound-Insulated Inline Mixed-Flow Fans - fig
5

Technical data

Speed min mid max min mid max
Voltage [V / 50 Hz] 1~ 230 1~ 230
Power [W] 82 104 113 144 173 188
Current [A] 0.37 0.46 0.51 0.70 0.81 0.84
Maximum air flow [m³/h (l/s)] 692 (192) 906 (252) 1110 (308) 1007 (280)
1404 (390) 1670 (464)
RPM [min⁻¹] 2229 2634 2823 2292 2626 2876
Sound pressure at 3 m [dBA] 37 42 44 38 43 45
Transported air temperature [°C] -25…+55 -25…+55
IP rating IPX4 IPX4
Motor IP rating IP20 IP20
ErP 2018 2018

ISO-PRIMO 200

Sound power level,
A-weighted ****| Total| Octave frequency bands [Hz]
---|---|---
63| 125| 250| 500| 1000| 2000| 4000| 8000| LpA3 m| LpA1 m
LwA to inlet [dBA]| 67| 63| 63| 59| 55| 47| 42| 42| 37| 46| 56
LwA to outlet [dBA]| 68| 65| 64| 59| 57| 49| 45| 45| 36| 48| 58
LwA to environment [dBA]| 64| 55| 51| 61| 60| 40| 40| 28| 22| 44| 54

BLAUBERG Iso-Primo Sound-Insulated Inline Mixed-Flow Fans - fig
6

ISO-PRIMO 250

Sound power level,
A-weighted ****| Total| Octave frequency bands [Hz]
---|---|---
63| 125| 250| 500| 1000| 2000| 4000| 8000| LpA3m| LpA1m
LwA to inlet [dBA]| 70| 45| 56| 62| 64| 63| 60| 62| 57| 49| 59
LwA to outlet [dBA]| 71| 41| 49| 61| 64| 67| 65| 60| 54| 51| 61
LwA to environment [dBA]| 65| 57| 55| 60| 58| 55| 54| 47| 39| 45| 55

BLAUBERG Iso-Primo Sound-Insulated Inline Mixed-Flow Fans - fig
7

blaubergventilatoren.de

BLAUBERG logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals