NINGBO STAR 0119 TWS Earbuds User Guide
- June 9, 2024
- NINGBO STAR
Table of Contents
NINGBO STAR 0119 TWS Earbuds
GETTING STARTED
- Micro USB charging port
- Charging Case LED indicators
- Left earbud LED indicator
- Left control touch button
- Right earbud LED indicator
- Right control touch button
Left Earbud/Right Earbud
Pause/Play/Answer Call/End Call
CHARGING YOUR CASE
- Charging the charging case: It will request 1-2 hours to complete the charging. The charging case LED indicator will flash red and turn into solid red after fully charged
- Do not charge longer than suggested time. Do not charge overnight.
CHARGING YOUR EARBUDS
- Place Right and Left Earbuds in the charging case
- Charging case LED indicator (2) will illuminate Blue and the earbud LED indicators (3,5) w ill illuminate Red, indicating that the earbuds are charging properly. When Earbuds LEDs (3,5) turn off, earbud batteries are fully charged.
MONO MODE
(SINGLE EARBUD USE)
- Remove the earbud from the charging case
- Once the earbud is powered on, It will automatically proceed to PAIRING
STEREO MODE
(DUAL EARBUD USE)
- Remove both earbuds from charging case and close each other
- Earbuds will automatically link together after a few seconds, and earbuds will have a tone One ear buds will flash red and blue, another earbud will flash blue only.
- Once Earbuds are linked together you may proceed to pairing with your mobile device.
PAIRING
- Search for pairing name “CPP-6753” and select it on your mobile phone. Once the earbuds are successfully paired, a notification will sound.
- Now you can enjoy your wireless Earbuds.
*Note: 1 Once earbuds have been initially paired successfully withyour mobile device, they will automatically pair the next time.
OPERATING EARBUDS
Model: CT04043
Item No.: CPP-6753
Capacity(Cradle): 300mAh / 3.7V (1.11Wh)
Capacity(Earbuds): 30mAh /3.7V (0.111Wh)
The input of earbuds: 5V / 60mA
Input of Cradle: 5V / 300mA (micro USB))
| Function | Action | Button |
|---|
Pause/start music
playback
| Short Press| Left / right
Volume up| Treble press| Right
Volume down| Treble press| Left
Select previous track| Double press| Left
Select next track| Double press| Right
Answer/End call| Short press| Left / right
Reject call| Long press| Left / right
“Voice assistant
(depend Smartphone)”
| Long press| Left / right
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Statement
The device has been evaluated to meet the general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.