NINGBO STAR CT02078 Portable Speaker User Manual
- June 8, 2024
- NINGBO STAR
Table of Contents
NINGBO STAR CT02078 Portable Speaker
Overview
- Mode button
- Next track/Vol +
- Previous track/ Vol-
- Play/pause
- USB connector
- TF Card slot
- Micro USB input
- Charging LED indicator
- Power Switch
- RBG light
Specifications
- Model: CT02078
- Item : O270
- Output Power : 3W
- Input: DC 5V / 500mA
- Battery capacity : 3.7V/400mAh 1.48Wh
- Charging time : 2 hours
- Play time : 2 hours
Operation Instructions
-
Power On : Slide the power switch to turn ON the speaker.
-
Pairing: Once the speaker is turned on, using your mobile device, search for Bluetooth devices and select Bluetooth ID ‘O270’. It will pair automatically.
-
Power Off: Slide the power switch to turn Off the speaker.
-
Play/Pause : When listening to music, press once the button to pause/play music
MADE IN CHINA -
Next track/Vol+: Short press to next track, long press to increase volume.
-
Short press 6: Previous track/Vol -: to last track, long press to decrease volume.
-
RGB light : Long press the Mode button to turn ON/OFF RGB light
-
TF card : It will automatically play music when the TF card is inserted.
-
USB flash disk : It will automatically play music when the USB disk is inserted.
-
Charging: Use the USB cable included to connect the speaker to a computer or adaptor, the LED indicator will display a solid red light. When the speaker are fully charged, the red light will be turned off
Attention
- Please enjoy music with an appropriate volume, to avoid damaging your hearing and sound system.
- Avoid exposure to rain, water droplets, and prolonged exposure to high temperature or high humidity environments.
- Keep away from heat, and high pressure, and prevent children from playing with this product.
- If the volume decreases or becomes distorted, this may indicate the lithium battery requires charging.
- Only use power sources that are suitable for the specifications of this product.
- Avoid damaging the product. Do not drop or apply pressure to the product.
- Please do not disassemble the product to avoid injury.
- If you are not using the product, please turn off the power and unplug the charger power cable.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
Warning : Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Statement
- The device has been evaluated to meet the general RF exposure requirement.
- The device can be used in portable exposure conditions without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>