NINGBO STAR 7198-26 Brick Outdoor Waterproof Bluetooth Speaker User Manual

NINGBO STAR 7198-26 Brick Outdoor Waterproof Bluetooth Speaker User Manual

1 x Instruction Manual
1 x Speaker
1 x Type-C Charging Cable

TOP VIEW

Button Functions

1. Short Press: Answer Call Short Press: End Call
2. Short Press: Beginning of Track Double Press: Previous Track Press and Hold: Volume Down
3. Short Press: Play Short Press: Pause
4. LED indicator
5. Short Press: Next Track Press and Hold: Volume Up
6. Battery LED indicator
7. Mode*
8. Microphone

SIDE VIEW

Button Functions

9. 3.5mm Line-in
10. Charging port
11. ON/OFF Switch

Bluetooth® Connection

After turning ON the speaker, the LED indicator will flash blue, search for devices via a mobile device. Select “Brick” from the list of pairable deices. When paired successfully, the LED will light solid blue.

*Mode Function

7. Short Press: a tone will sound, indicating secondary Bluetooth® pairing function.

Tech Specifications

• Bluetooth version: 5.0
• Speaker driver diameter:40mm
• Play back time: up to 4 hours at max volume
• Charging time: around 4-5 hours
• Charging input: DC 5V 400mA
• The LED will light up red while charging, and then turn off when completely charged.
• Accessories: type-C cable(50cm), an instruction manual .
• There is a built-in microphone to answer phone calls under Bluetooth mode

Warnings & Safety Precautions:

• Read all the instructions before using the 0 product.
• The unit’s full performance is achieved only after 2 or 3 completed charge and discharge cycles.
• To reduce the risk of injury, close supervision is necessary when the product is used near children.
• Do not expose the device to moisture.
• Do not use the device in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury.
• Do not use the device if damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
• Do not disassemble the device. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury.
• Do not expose the device to fire or excessive temperature. Exposure to fire or temperatures above 212°F may cause explosion.
• Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.

FCC Statements

• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
• This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
• This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Trouble Shooting

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Statement

The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>