TIMEX TW2U87800 1975 Reissue Day-Date 38mm Leather Strap Watch User Guide
- June 6, 2024
- Timex
Table of Contents
732-096000 10.1.20
Register your product at https://www.timex.conn/product-registration.html
Congratulations on purchasing your TIMEX® watch. Please read these
instructions carefully to understand how to operate your Timex timepiece.
Your watch may not have all of the features described in this booklet.
For more information, please visit: Timex.com
HOW TO START YOUR WATCH
To start your watch remove the plastic guard from under the crown, then press the crown in against the case. The second hand will begin advancing in one- second intervals. Some deep-depth water-resistant watches require the setting crown to be screwed in to secure water resistance. If your watch case has a protrusion with screw threads, the crown must be screwed in after setting the watch. To screw in, push the crown firmly against the threaded protrusion and hold in while turning the crown clockwise. Continue to screw in the crown until it is tight. You will need to unscrew the crown (counter-clockwise) before pulling it out the next time you want to set your watch.
WATER AND SHOCK RESISTANCE
If your watch is water-resistant, meter marking or ( ) is indicated
Water-Resistance Depth | *p.s.i.a. Water Pressure Below Surface** |
---|---|
30m/98ft | 60 |
50m/164ft | 86 |
100m/328ft | 160 |
*pounds per square inch absolute
WARNING: TO MAINTAIN WATER RESISTANCE, DO NOT PRESS ANY BUTTONS UNDERWATER.
- Watch is water-resistant only as long as crystal, crown, and case remain intact.
- Watch is not a diver watch and should not be used for diving.
- Rinse watch with fresh water after exposure to saltwater.
- Shock resistance will be indicated on the watch face or caseback. Watches are designed to pass the ISO test for shock resistance. However, care should be taken to avoid damaging the crystal.
TO SET TIME
-
PULL crown to position C and turn until the hour and minute hands display the correct time.
Note the correct time of day (A.M. or P.M.) for proper date function (if applicable). The date will advance between 9:00 PM and 1:00 AM -
Push the crown to position A.
TO SET DATE (IF APPLIES)
- PULL crown to position B and turn COUNTER-CLOCKWISE until correct day appears. Note: if the date is set between the hours of around 9:00 PM and 1:00 AM, the date may not change the following day. If this occurs, reset the Time and Date at any other time than between the hours of around 9:00 PM and 1:00 AM to ensure proper date function.
- Push the crown to position A.
HOW TO ADJUST BRACELET
(Variations of the following bracelet sections apply to all watch models).
SLIDING CLASP BRACELET
- Open locking plate.
- Move clasp to desired bracelet length.
- Exert pressure while holding locking plate and it engages in grooves on the underside of the bracelet
- Press locking plate down until it snaps closed excessive force is used. slide clasp back and forth until t. The clasp can be damaged if
FOLDOVER CLASP BRACELET
- Find a spring bar that connects the bracelet to the clasp.
- Using a pointed tool, push in the spring bar and gently twist the bracelet to disengage.
- Determine wrist size, then insert spring bar incorrect bottom hole.
- Push down on spring bar, align with top hole and release to lock in place.
BRACELET LINK REMOVAL
REMOVING LINKS:
- Place bracelet upright and insert pointed tool in the opening of link.
- Push the pin forcefully in direction of the arrow until the link is detached (pins are designed to be difficult to remove).
- Repeat until the desired number of links are removed.
RE-ASSEMBLY:
- Rejoin bracelet parts.
- Push the pin back into a link in the opposite direction of the arrow.
- Press pin down securely into the bracelet until it is flush.
EXTENDED WARRANTY
Available in U.S. only. Extend your warranty for an additional 4 years from the date of purchase for $5. You can pay with AMEX, Discover, Visa or MasterCard by calling 1 800-448-4639 during normal business hours. Payment must be made within 30 days of purchase. Name, address, telephone number, purchase date, and 5-digit model number required. You can also mail a check for $5 to: Timex Extended Warranty, P.O. Box 1676, Dept. EF, Little Rock, AR 72203.
TIMEX INTERNATIONAL WARRANTY
http://www.timex.com/productWarrantv.html
©2018 Timex Group USA, Inc. TIMEX is a registered trademark of Timex Group
USA, Inc. in the US and other countries.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>