TIMEX WR 10M Stopwatch User Guide

: October 30, 2023
: Timex

Table of Contents

Stopwatch
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Stopwatch

991-097372 1.17.2023
Register your product at https://www.timex.com/product-registration

02403_PK23

EXTENDED WARRANTY

Available in U.S. only. Extend your warranty for an additional 4 years from date of purchase for $5. You can pay with AMEX, Discover, Visa or MasterCard by calling 1 800-448-4639 during normal business hours. Payment must be made within 30 days of purchase. Name, address, telephone number, purchase date, and 5-digit model number required. You can also mail a check for $5 to: Timex Extended Warranty, P.O. Box 1676, Dept. EF, Little Rock, AR 72203.
Please read instructions carefully to understand how to operate your Timex® watch. Your model may not have all of the features described in this booklet.
Thank you for purchasing the TIMEX® IRONMAN® Stopwatch! Read this User Guide to learn more about this exciting product.
Be sure to visit http://www.Timex.com for the latest product information, instructional videos, and other features.

IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS

To prevent risk of fire, chemical burn, electrolyte leak, and/or injury from the unit’s internal Lithium-polymer battery:
a. Do not attempt to remove the case-back or exterior shell of the unit, or to remove its non-user-replaceable battery.
b. Do not leave the unit exposed to a heat source or in a high-temperature location (such as in the sun or in an unattended vehicle). To prevent damage, store the unit out of direct sunlight.
c. Do not puncture or incinerate the unit.
d. When storing the unit for an extended time, keep it in the 32 to 77°F (0 to 25°C) temperature range.
e. Charge the unit only within the 32 to 113°F (0 to 45°C) temperature range.
f. Do not operate the unit outside the -4 to 131°F (-20 to 55°C) temperature range.
g. Contact your local waste disposal department to properly recycle or dispose of the unit or its battery.
This unit is not a medical device and is not recommended for use by persons with serious heart conditions. Always consult your physician before beginning or modifying an exercise program.
Do not attempt to read the unit’s display while moving: this is unsafe and distracting, and could result in an accident or collision. Read the display only when you can safely do so. See the instructions for details.

INTRODUCING THE STOPWATCH

The Timex Ironman Stopwatch operates through its control buttons, mode-based interface and segmented LCD display.

BUTTONS

A = STOP/RESET
B = MODE
C = START/LAP

SEGMENTED LCD DISPLAY

DAY OF WEEK
DATE
SECONDS
ALARM
CHIME
MINUTES
HOUR

STOPWATCH MODES

Mode Selection
Press the MODE button to change Stopwatch modes in the following sequence:
Time Mode - Stopwatch Mode - Data Mode - Countdown Mode - Alarm Mode - Dual Time Mode

Time Mode
Setting Time Mode

Press the MODE button until TIME is displayed.
Press and hold the STOP/RESET button until Seconds are flashing.
Press START/LAP to reset Seconds.
Press MODE to set Hours.
Press START/LAP to increase the number. Press and hold START/LAP to increase at high speed.
Repeat steps 4 and 5 to set Minutes, Year, Month, Date, 12/24 Hour format.
Press STOP/RESET to exit the settings state.

Calendar Mode
When in Time Mode, press and hold the START/LAP button to display:
MONTH, DATE, YEAR.

Stopwatch Mode
Your Timex Ironman Stopwatch supports 150 Laps, 1/100 second units and has a measuring range of 00:00’00” - 9:59’59”.

Press the MODE button until Chro is displayed.
a. Display will show STP once you’ve accessed the Chro mode.
Press the START/LAP button to start the stopwatch timer.
Press the STOP/RESET button to stop the stopwatch timer.
To reset the stopwatch timer, press the STOP/RESET button.

Split Timing in Stopwatch Mode

Press the MODE button until Chro is displayed.
a. Display will show STP once you’ve accessed the Chro mode.
Press the START/LAP button to start the stopwatch timer.
Press the START/LAP button to trigger a split/lap.
a. SPLIT time will display for 2 seconds.
Repeat step 3 until the timing is complete.
Press STOP/RESET to stop the stopwatch timer.

Data Mode
Access the most recent Lap and Split data, up to 150 laps.

Press the MODE button until DATA is displayed.
Stopwatch timing data can be viewed by LAP time or SPLIT time.
a. To view LAP times, press the START/LAP button and each individual LAP time will be displayed.
b. To view SPLIT times, press the STOP/RESET button and each SPLIT time will be displayed.
To resume the stopwatch timer, press the STOP/RESET button.

Countdown Mode
Your Timex Ironman Stopwatch has a countdown range of 23:59’59” - 0:00’00”.

Setting the Countdown Timer

Press the MODE button until Tmr is displayed.
Press and hold the STOP/RESET button until Hours are flashing.
Press START/LAP to increase the number. Press and hold START/LAP to increase at high speed.
Press the MODE button to change to the next selection (minutes).
Press START/LAP to increase the number. Press and hold START/LAP to increase at high speed.
Press the MODE button to change to the next selection (seconds).
Press START/LAP to increase the number. Press and hold START/LAP to increase at high speed.
Press STOP/RESET to exit the setting state.

Using the Countdown Timer

Press the MODE button until Tmr is displayed.
Press the START/LAP button to start the countdown timer.
Press the STOP/RESET button to pause the countdown timer.
When the countdown timer reaches zero, the alarm sounds for 60 seconds.
Press any button to stop the alarm.

Alarm Mode
Your stopwatch supports up to five alarms and has an hourly chime function. The alarm sounds at the pre-set time each day for about 60 seconds. Press any button to stop the alarm.

Press the MODE button until AL is displayed.
Press the STOP/RESET button to access the AL-1 settings.
Press the START/LAP button to turn on/off the Chime (audible alerts).
Press and hold the STOP/RESET button until Hours are flashing.
Press START/LAP to increase the number. Press and hold START/LAP to increase at high speed.
Press the MODE button to change to the next selection (minutes).
Press START/LAP to increase the number. Press and hold START/LAP to increase at high speed.
Press STOP/RESET to exit the set state.
Follow steps 2-8 to set Alarms 2, 3, 4 and 5.

Dual Time Mode

Press the MODE button until DT is displayed.
Press and hold STOP/RESET until Hours are flashing.
Press START/LAP to increase the number. Press and hold START/LAP to increase at high speed.
Press the MODE button to change to the next selection (minutes).
Press START/LAP to increase the number. Press and hold START/LAP to increase at high speed.
Press STOP/RESET to exit the set state.