Stealth Products P144D562 Simple Solutions Tray Owner’s Manual
- June 9, 2024
- Stealth Products
Table of Contents
- Stealth Products P144D562 Simple Solutions Tray
- Customer Satisfaction
- General
- Warranty
- Design and Function
- Mounting
- Parts and Accessories
- Installation Instructions
- Installation Instructions
- First Time Use
- Safety
- Maintenance
- Maintenance
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Stealth Products P144D562 Simple Solutions Tray
Customer Satisfaction
Stealth Products is committed to 100% customer satisfaction. Your complete satisfaction is important to us. Please contact us with feedback or suggestions to help us improve the quality and usability of our products.
You may reach us at:
StealthProducts,LLC 104JohnKellyDrive, Burnet,TX78611
Phone:(512)715-9995
TollFree:(800)965-9229
Fax:(512)715-9954 T
Toll Free:(800)806-1225
info@stealthproducts.com
www.stealthproducts.com
General
Read and understand all instructions prior to the use of the product. Failure
to adhere to instructions and warnings in this document may result in property
damage, injury, or death. Product misuse or failure to follow instructions
will void the warranty.
Immediately discontinue use if any function is compromised, if parts are
missing or loose, or if any component shows signs of excessive wear. Consult
with your supplier for repair, adjustment, or replacement.
All persons responsible for fitting, adjustment, and daily use of the devices
discussed in these instructions must be familiar with and understand all
safety aspects of the devices mentioned. In order for our products to be used
successfully, you must read and understand all instructions and warnings, and
maintain our products according to our instructions on care and maintenance.
The installation instructions will guide you through this product’s options
and possibilities.
Instructions are written with the expressed intent of use with standard
configurations. They also contain important safety and maintenance information,
as well as describe possible problems that can arise during use. For further
assistance, or more advanced applications, please contact your supplier or
Stealth Products at 512-715-9995 or
toll free at 800-965-9229.
Always keep the operating instructions in a safe place so they may be
referenced as necessary.
All information, pictures, illustrations, and specifications are based on the
product information that was available at the time of printing. Pictures and
illustrations shown in these instructions are representative examples and are
not intended to be exact depictions of the various parts of the product.
Important Information
CAUTION These products are designed to be fitted, applied, and installed exclusively by a healthcare professional trained for these purposes. The fitting, application, and installation by a non-qualified individual could result in serious injury.
Warranty
Our products are designed, manufactured, and produced to the highest of
standards. If any defect in material or workmanship is found, Stealth Products
will repair or replace the product at our discretion. Any implied warranty,
including the implied warranties of merchantability and fitness for a
particular purpose, shall not extend beyond the duration of this warranty.
Stealth Products does not warrant damage due to, but not limited to: Misuse,
abuse, or misapplication of product, and/or modification of product without
written approval from Stealth Products, LLC. Any alteration or lack of serial
number, where applicable, will automatically void all warranty.
Stealth Products, LLC Is liable for replacement parts only. Stealth Products,
LLC is not liable for any incurred labor costs.
Stealth Products warrants against failure due to defective materials or
workmanship:
- Covers: 2 years
- Hardware: 5 years
- Electronics: 3 years
In the event of a product failure covered by our warranty, please follow the
procedures outlined below:
Call Stealth Products at 512-715-9995
or toll free at 800-965-9229.
Request a Return Authorization (RA) form from the Returns Department and
follow the documentation instructions.
You can download additional copies of this manual by accessing the Stealth
website (www.stlpro.site/stealth-docs)
and searching “Simple Solutions Tray” in the search bar at the top of the
page.
Supplier Reference
- Supplier:
- Telephone:
- Address:
- Purchase Date:
- Model:
Warning Labels
Warnings are included for the safety of the user, client, operator, and
property. Please read and understand what the signal words DANGER, WARNING,
CAUTION, NOTICE, and SAFETY mean, and how they could affect the user, those
around the user, and property.
- DANGER Identifies an imminent situation which, if not avoided, may result in severe injury, death, and property damage.
- WARNING Identifies a potential situation which, if not avoided, may result in severe injury, death, and property damage.
- CAUTION Identifies a potential situation which, if not avoided, may result in minor to moderate injury and property damage.
- NOTICE Identifies important information not related to injury, but possible property damage.
- SAFETY Indicates steps or instructions for safe practices, reminders of safe procedures, or important safety equipment that may be necessary.
Limited Liability
Stealth Products, LLC accepts no liability for personal injury or damage to
property that may arise from the failure of the user or other persons to
follow the recommendations, warnings, and instructions in this manual. Stealth
Products does not hold responsibility for final integration of final assembly of
product to end user. Stealth Products is not liable for user death or injury.
Testing
Initial setup and driving should be done in an open area free of obstacles
until the user is fully capable of driving safely.
Design and Function
Intended Use
The Simple Solutions Tray eliminates the need for a user to pull under a table
to participate in independent ‘activities of daily life’. Mounting screws are
flush to the surface of the tray to provide a flat writing and work surface for
the user. The tray can also be used as a support device to help users maintain
their posture and/or support their arms. The clear material allows for
visibility of the lower extremities and correction of posture. The flip-away
hardware lifts up and out of the way during transfers or for wheelchair
storage. It also allows depth adjustability of the tray for comfort and
optimal positioning for the user.
Features
The Simple Solutions Tray features:
- A range of adjustability through telescopic cane mounting and center track mounting.
- A dual mounting option that allows one tray to be mounted left or right for the user.
- A swing away option for ease of accessibility when getting on and off the chair.
- Polycarbonate material which provides strong impact resistance.
- A body cutout to prevent squeezing of the user’s abdomen.
Mounting
The Simple Solutions Tray is mounted in the armrest of a wheelchair and is
only stable if the wheelchair is equipped with full length arms.
The hardware will mount to a 3/4″ cane clamp.
CAUTION The Simple Solutions Tray is intended to hold no more than 5 lbs
(2.27 kg) at a time. It is not intended to be a support surface or positioning
device.
Parts and Accessories
Parts and Accessories Breakdown
A typical Simple Solutions Tray package comes with:
- Tray Composed of shatter-resistant polycarbonate material with better impact resistance and light transmission than most glass. Polycarbonate is safe, durable and lightweight.
- Swing Away Hardware Composed of 3/4″ aluminum tubing with black anodizing.
Hardware Parts
Description | Qty | |
---|---|---|
A | Mounting Screws | M5 x 0.8 x 20mm FHS |
B | Tray | Simple Solutions Tray |
C | Hardware | Swing Away Hardware |
Note: The size and shape of the tray will vary.
Installation Instructions
Preparations
Only a qualified service technician may install the Simple Solutions Tray.
CAUTION The use of improper tools may cause damage to the device. Insufficient or excess tightening can cause components to fail or cause discomfort for the user.
Installation Plan
Set up an installation plan before beginning the installation. This plan
should take into account:
- Where the tray will be placed, as well as applicable laterals and support cushions.
- How the tray will be operated, i.e. the quick release functions for the mount and laterals.
- The provision of sufficient clearance for other hardware and accessories.
CAUTION Any connection must always be secured with all delivered screws. Use only the screws provided in the package.
Required Tools
Use the proper tools to install and adjust the Simple Solutions Tray to the
desired position for the user. Ensure all torque specifications are followed.
The tools needed to complete the installation of the Simple Solutions Tray are
as follows:
Hardware | Function |
---|---|
3mm Hex Key | Track Mount to Tray, Set Screws |
4mm Hex Key | Mounting Hardware to Track Nut |
Screws | Torque Specifications |
--- | --- |
M5 x 0.8 x 20mm Flat Head Screw | 6.9 N·m |
M5 x 0.8 x 4mm Set Screw | 6.9 N·m |
M6 x 0.8 x 10mm Button Head Screw | 10.0 N·m |
Installing the Tray
- Step One: Place the plastic tray over the track mounts. Align the holes of the plastic tray with the holes in the track mounts.
- Step Two: Using the 3mm hex key, tighten the M5 x 0.8 x 20mm Flat Head screws to the secure the tray to the hardware. Ensure the screws are flush with the plastic to create a clean surface. (Do not overtighten as doing so can damage the plastic.)
- Step Three: Loosen the stop collar using a 3mm hex key and slide it forward on the tube.
- Step Four: Insert the tube into the clamp and adjust to the appropriate depth. Lock using the latch on the clamp.
- Step Five: Slide the stop collar along the tube, against the clamp and tighten it in place using a 3amm hex key.
Installation Instructions
Depth Adjustment
- Step One: Loosen the stop collar using a 3mm hex key.
- Step Two: Slide the tray to the correct position for the user. Lock using the latch. Step Three: Slide the stop collar against the clamp to prevent unintentional movement of the tray. Lock the stop collar in place by using a 3mm hex key.
Horizontal Adjustment
- Step One: Loosen the M6 x 1 x 10mm Button Head Screws using a 4mm hex key.
- Step Two: Slide the tray to the correct position for the user.
- Step Three: Tighten the M6 x 1 x 10mm Button Head Screws using a 4mm hex key.
First Time Use
Dealer Assistance
During first time use by the client, it is advised that the dealer or service
technician assists and explains the configuration to the customer (the user
and/or the attendant). If needed, the dealer can make final adjustments.
User Testing
It is important that the customer is fully aware of the installation of the
Simple Solutions Tray, how to use it, and how it can be adjusted to fit the
client comfortably. As a dealer, proceed as follows:
- Explain and show the client how you have executed the installation, and explain the function.
- Have the user test the position of the Simple Solutions Tray:
- Is the hardware in the proper position for the client?
- Can the user safely operate all controls with minimal effort?
Conditions of Use
The Simple Solutions Tray is intended for use as installed by the dealer, in
accordance to the installation instructions in this manual.
- The foreseen conditions of use are communicated by the dealer or service technician to the user and/or attendant during the first time use.
- If the conditions of use change significantly, please contact your dealer or a qualified service technician to avoid excessive wear and tear or unintended damage.
Safety
General Safety Guidelines
WARNING The edge of the tray should not be used as an armrest, as it can
cause soreness to the user’s forearms.
WARNING The tray should be removed during operation or transportation of
the chair.
WARNING Care should be taken, when swinging the tray to the side, not to
strike the user as it can lead to injury for the user or damage to the tray.
WARNING The tray is not intended to be used as a positioning device. The
tray should be adjusted such that it does not make contact with the user’s
abdomen.
WARNING Be mindful of fingers, cables, or other equipment when swinging
the tray to the side.
NOTICE Your safety is important to us. If there is any information in
this manual which you do not understand, or if you require additional
assistance for setup or operation, please contact your authorized dealer.
Failure to follow the instructions, warnings, and notes in this manual and
those located on the product can result in personal injury
or product damage and will void the product warranty.
Maintenance
Cleaning
- Wash the Simple Solutions Tray with a mild soap or detergent using a clean sponge or soft cloth.
- Rinse the tray well with clean water.
- Do not scrub or use brushes or abrasive cleansers with this product.
Disinfecting Wipe gently with a cloth dampened with a household disinfectant.
Maintenance
These care and guidance instructions will keep the hardware and tray in good condition for a longer period of time and prevent damage.
- Check and tighten all fasteners to the proper torque specifications on a regular basis. Reference the installation manual to find proper torque specs.
- Check weldments on tray hardware for wear and ensure that tubing isn’t bent or damaged.
© 2021, Stealth Products, LLC
Stealth Products, LLC
info@stealthproducts.com
www.stealthproducts.com
800-965-9229 |
512-715-9995 | 104 John Kelly Drive,
Burnet, TX 78611
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>