pTron P681 TWS Earbuds User Manual
- June 9, 2024
- pTron
Table of Contents
pTron P681 TWS Earbuds
Important
pTron ‘Basspods P681’ is set at 50% default volume, and the earbuds does not support volume adjustment. Please control the volume via the connected phone.
Advanced Pinch to Control Function
Control music and calls with a pinch without hurting your ears (Indented pinch
sensors on the sides of the each earbud).
Smart Power On & Pairing
- Open the charging case cap & take out both the earbuds together from the charging case, buds will switch ON automatically.
- Wait for 2-3 seconds until L & R earbuds pair with each other.
- Turn on the Bluetooth on your phone & search “pTron TWS” to connect with the device.
Smart Power Off
Pinch 4 times on either earbuds Or Keep both the earbuds into the charging case and close the charging case cap properly.
Mode Change
Pinch on Right earbud thrice to change the modes – Music Mode & Game Mode.
Connectivity Bluetooth – Automatic
Open the charging case cap & take out both the earbuds together from the
charging case, buds will switch ON automatically. Then, buds will
automatically connect to the last connected device (Instant wake & pair
technology).
Note: The last connected device must be in 10 meters wireless range and
Bluetooth function must be On.
Calling or Music through Mono & Dual Buds
Mono Bud Use – Just place the right or left earbud back into the charging
case and close the cap properly.
Dual Buds Use – Use left & right earbuds together.
Voice Assistant Activation – Google/Siri
Pinch on Left earbud until you hear a “beep” sound.
Call & Music Functions
Answer/Hangup a Phone Call – Pinch either earbud once.
Reject a Phone Call – Pinch either earbud twice.
Music Play/Pause – Pinch either earbud once.
Next Song – Pinch right earbud twice.
Previous Song – Pinch left earbud twice.
Note: Pinch sensors are located on sides of the earbuds.
Charging the Earbuds
- Place both the earbuds into the charging case properly and close the cap.
- The earbuds will power off automatically and they will start charging.
- While charging the earbuds the Red LED light will flash constantly.
- The digital display on the charging case will show the charging level in numbers. When the earbuds are getting charged, the charging level of both earbuds will be shown on display.
Charging the Case
- Connect the USB C-Type cable to the charging case and the USB end to a 5V power source.
- The digital display on the charging case will show the charging level of the case in number.
- 100 on the display means that the case is fully charged. Now, remove the case from the power supply.
Caution: Using incompatible USB cable or high voltage chargers can damage the product & void the product warranty. We strongly recommend using a good quality DC5V-1A chargers & the USB cable included in the package.
Troubleshooting Scenario 1 : One Earbud is Not Working
- Place both the earbuds in the charging case and close the charging case cap properly.
- Take out both the earbuds together from the charging case.
- Wait until L & R earbud pair to each other. After successful matching, only 1 earbud will flash Green light.
- Turn ON the Bluetooth on your phone, search for “pTron TWS” & connect.
Troubleshooting Scenario 2 : Earbuds Not Connecting/Scanning
- Place both the earbuds in the charging case and close the charging case cap properly.
- Take out both the earbuds together from the charging case.
- Restart your Bluetooth device or phone.
- Now, search for “pTron TWS” on your Bluetooth device & connect.
Troubleshooting Scenario 3 : Earbuds Disconnecting During a Phone Call
- Charge earbuds 100% before use.
- Restart the earbuds and reconnect with your device.
Safety Precautions
- Please keep this device away from extreme heat, liquids, humidity or corrosive environment.
- Please don’t over-charge the product as it will decrease the service life of battery.
- Using incompatible USB cable or high voltage chargers can damage the product & void the product warranty. We strongly recommend using a good quality DC5V-1A chargers & the USB cable included in the package.
- This product or the Bluetooth function should not be used during charging.
- Don’t jam the ports such as charger port, LED port, etc.
- It is recommended to utilize the product below the maximum volume in order to protect your hearing.
- Please don’t open/temper the product or product’s battery.
- Please keep the product out of children’s reach.
- Dispose the product responsibly and adhere to your local authority guidelines.
Disclaimer
The colors and specifications shown or mentioned in the user manual may differ from the actual product. Images shown are for representation purpose only. Other product logos and company names mentioned herein may be trademarks or on trade names of their respective owners.
Customer Care Details: support@ptron.in and 040-040 –
67138888
Product Registration/Warranty Registration: https://ptron.in/apps
/product-registration
Service Centers List: https://ptron.in/pages/ptron-service-
centers
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>