NINJA Foodi CI100 Series Power Mixer System User Guide
- June 9, 2024
- Ninja Foodi
Table of Contents
NINJA Foodi CI100 Series Power Mixer System
WHAT’S INCLUDED
Power Base:
Choose from multiple attachments and accessories to unlock an array of outputs
for the power base.
Hand Mixer Attachment:
Power through any recipe with 5 mixing speeds.
Hand Mixer Accessories:
(vary by model)
Two Beaters, Two Dough Hooks, and Single Whisk
Chopper Attachment:
(not included with all models)
Attach with power base to chop, mince, and puree ingredients. Storage lid
included.
Immersion Blender Attachment:
2 blending speeds allow you to blend the toughest ingredients.
3-Cup Blending Vessel & Lid
Perfectly designed for the immersion blender attachment so you can blend your
favorite ingredients.
NOTE:
The 3-cup blending vessel is not microwave safe.
HAND MIXER
Assembly
Install power base:
Align the arrow on the power base with the arrow on the mixer attachment, then
push the power base onto the attachment to lock it in place.
Choose your accessory:
Install both beaters, both dough hooks (not available with all models), or the
whisk using the accessory slots on the mixer head. Insert the beater/dough
hook with the collar into the slot with the diagram showing a collar. The
whisk can be inserted into either slot. You will hear a slight click when
locked into place.
NOTE:
If using the whisk, do not insert a beater/dough hook in the other slot.
Using the Controls
Mixing Speeds
- SPEEDS 1 & 2: Use when combining dry ingredients, like flour, into liquid ingredients or for thicker doughs, such as bread dough.
- SPEEDS 3 & 4: Use for cookie doughs, batters, quick breads, frostings, and most other recipes.
- SPEED 5: Use speed 5 for whipping cream, mousse, or egg whites.
NOTE: To prevent ingredients from splattering, start on a low speed, then slowly ramp up to the desired setting.
Disassembly
-
Eject accessory:
Push the eject button on the hand mixer attachment to remove the beaters or other accessories. -
Eject power base:
Press and hold the release buttons on each side of the power base to detach.
IMMERSION BLENDER
Assembly
Install the power base:
Align the arrow on the power base with the arrow on the immersion blender
attachment, then push the power base onto the blender attachment to lock it in
place.
Disassembly
Remove the power base:
Press and hold the release buttons on each side of the power base to detach
.
Using the controls
Blending Speeds
- LOW: Use to blend liquids, such as mayo or dressing, or soups and sauces with soft ingredients, such as tomato sauce.
- TURBO: Use for tougher ingredients, such as butternut squash, or for smooth purees, such as hummus.
Blending
-
Choose your container:
The container should be large enough for the blender head to be fully submerged in the ingredients. Once submerged, there should be ample room in the container to avoid overflowing and splashing. A cooking pot, large measuring container, or the blending vessel (not included with all models) is recommended. -
Blending:
Submerge vents of blender head in the ingredients. Use an up-and-down motion to blend, making sure to stop blending any time the vents are no longer submerged.
NOTE:
For best results, hold the unit with the control panel facing away from you.
CHOPPER
Not available with all models. To purchase, visit ninjaaccessories.com
Visit qr.ninjakitchen.com/powermixersystem or SCAN HERE
Assembly
Set up the blade & lid assembly:
Holding the blade assembly by the top of the shaft, install it in the chopper
bowl. Place ingredients in the bowl. Install the processing lid by aligning
the lid with the notches in the bowl. Ensure the lid is fully installed; there
will be no click.
Install the power base:
Attach the power base by aligning the arrow on the power base with the arrow
on the processing lid, then push the power base onto the lid to lock it in
place.
Using the controls
Dissassembly
-
Remove the power base:
Press and hold the release buttons on each side of the power base to detach. -
Remove the processing lid:
Lift up the processing lid. Always remove the blade assembly before emptying the bowl.
Chopper Basics
For best results, we recommend:
- Prepping ingredients into even size pieces and ensuring they sit below the top blade.
- Being careful to avoid overfilling and over-processing (so you don’t get uneven or watery results).
- Holding the chopper bowl with one hand while processing to help ensure it stays in place.
Storage
Use the included storage lid to store ingredients in the bowl.
WARNING: Chopping blade assembly is sharp and not locked in place. Before emptying the bowl carefully remove the chopping blade assembly. Failure to do so will result in a risk of laceration. Refer to the Ninja Safety Instructions for additional information.
CLEANING
Unplug the power base before cleaning. Wipe the power base, hand mixer attachment, and chopper processing lid with a clean, damp cloth.The immersion blender, beaters, dough hooks, whisk, chopper bowl, blade assembly, and storage lid are all top-rack dishwasher safe. If hand-washing, wash in warm, soapy water. Use a dishwashing utensil with a handle when washing blade assemblies.
Not available with all models.
To purchase, visit ninjaaccessories.com.
Visit
qr.ninjakitchen.com/powermixersystem
or SCAN HERE
Scan here to learn how to use your Power Mixer System, explore recipes, and purchase additional accessories!
VISIT
QR.NINJAKITCHEN.COM/POWERMIXERSYSTEM
OR
SCAN HERE
FOODI and NINJA are registered trademarks of SharkNinja Operating LLC. POWER
MIXER is a trademark of SharkNinja Operating LLC. This product may be covered
by one or more U.S. patents. See
sharkninja.com/patents for more information.
© 2022 SharkNinja Operating LLC
CI100Series_QSG_MP_Mv11
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>