LG CBIS3618B 36 Inch Induction Cooktop with 5 Burners and Flex Cooking User Guide
- June 9, 2024
- LG
Table of Contents
LG CBIS3618B 36 Inch Induction Cooktop with 5 Burners and Flex Cooking User Guide
This quick reference guide to cooking accessories will help to make sure you
have
what you need for a successful installation in just 3 easy steps.
Installation Steps
Step 1
Find your model number in this guide. Model numbers that contain an underscore
(_) are available in multiple colors. For example, LTG4715_comes in both
Stainless Steel (LTG4715ST) and Black Steel (LTG4715BD). LSGS6338F does not
have the underscore as it only comes in Stainless Steel. Be sure to confirm
availability and ordering of your color choice.
Step 2
Read the information on required and optional accessories to determine your
needs and prepare yourself by knowing the answers to the following questions.
- Gas or electric appliance?
- If purchasing a gas range or cooktop, is your home natural gas (NG) or liquid propane (LP)?
- Do you have the required electrical supply and an adequately sized circuit breaker?
- If installing an over-the-range microwave or hood, have you planned for venting?
Step 3
Identify the items you need to purchase for your cooking appliance. Items with
a check box need to be purchased separately.
Where to Buy?
Required Accessories
Purchase from dealer links, in-store with unit purchase, or if part is available, click the LG parts & accessories button.
Optional Accessories
Purchase by clicking the LG parts & accessories button* or call 1-800-243-0000.
LG Part & Accessories
What Accessories Do I Need to Purchase forMy LG Gas or Dual Fuel Slide-In Range?
- Items in RED with a check box require you to make a purchase
- Items in BLACK with a check box are optional
Items in BLACK without a box are included with purchase.
| STEP 1:
FIND YOUR MODEL NUMBER
---|---
LSDS6338F, LSGS6338F, LTG4715(ST, BD), LSDL6336(F, D), LSGL6337(F, D),
LSGL6335(F, D), LSGL5833_(F, D), LSGL5831F
STEP 2:
READ THIS INFORMATION| STEP 3:
IDENTIFY THE ITEMS YOU NEED TO PURCHASE FOR YOUR MODEL NUMBER
Required Accessories
Purchase from dealer links, in-store with unit purchase, or if part is
available, click the LG parts & accessories button† or
call1-800-243-0000.LG Parts &
Accessories| Electrical RequirementsLG Gas Slide-in Ranges have a 3-prong
power cord attached to the unit. A 120 V, 60 Hz, properly grounded dedicated
circuit protected by a 15 or 20 Amp circuit breaker, or slow blow fuse is
required.| | 3-Prong Power Cord Attached to Unit
Installation Parts Required for Gas Hookup| | Gas Line Shut-Off Valve Joint
SealantFlexible Metal Appliance Connector (3/4″ or 1/2″ NPT x 1/2″ I.D.)Flare
Union Adapter for Connection to Gas Supply Line (3/4″ or 1/2″ NPT x 1/2″ I.D.)
Flare Union Adapter for Connection to Pressure Regulator on Range (1/2″ NPT x
1/2″ I.D.)
Anti-Tip BracketAn anti-tip bracket is included and must be installed. Do not
operate the range without the anti-tip bracket in place.| | Anti-Tip Bracket
Included and Must be Installed
Additional parts needed when installing on concrete floor.| | Lag Bolt or
1/2″ O.D. Sleeve Anchor (Concrete Floors Only)
LP Conversion KitIf your home uses Liquid Propane (LP) instead of Natural Gas
(NG), utilize the LP Conversion Kit.| | LP Conversion Kit Included
Optional AccessoriesPurchase by clicking the LG parts & accessories button† or
call1-800-243-0000.LG Parts &
Accessories| Rear FillerIf the counter does not bridge the opening at the rear
wall, the rear filler kit that is provided with the slide-in range, will be
needed.| | Rear Filler Included
Side Filler Kit (2 pieces)Prevents spills or food residue from sliding in-
between the range and countertop. The kit is installed with adhesive, no
mounting brackets or screws needed.| | LSFL301S Side Filler Kit
Broiler Pan and Grid| _| Broiler Pan – Part Number Coming Soon
| Grid Pan – Part Number Coming Soon
Air Fry Rack| | Air Fry Rack – LRAL302S(For use with models with Air Fry
feature: LSGL6337, LSGL6335; these models include an Air Fry Tray / Basket
that sits on an existing oven rack, the Air Fry Rack is a standalone rack
accessory)
What Accessories Do I Need to Purchase for My LG Electric Slide-In Range?
Items in RED with a check box require you to make a purchase Items in BLACK
with a check box are optional Items in BLACK without a box are included with
purchase.| STEP 1: FIND YOUR MODEL NUMBER
---|---
LSIS3018SS, LSES6338F, LSE4617ST, LSE4616(ST, BD), LTE4815ST, LSEL6337(F,
D), LSEL6335(F, D), LSEL6333_(F, D), LSEL6331F
STEP 2:
READ THIS INFORMATION| S TEP 3:
IDENTIFY THE ITEMS YOU NEED TO PURCHASE FOR YOUR MODEL NUMBER
Required Accessories
Purchase from dealer links, in-store with unit purchase, or if part is
available, click the LG parts & accessories button† or
call1-800-243-0000.LG Parts &
Accessories| ElectricalRequirements
LG Electric Slide-in Ranges require a 240/208 V, 60 Hz, properly grounded
dedicated circuit protected by a 40 or 50 Amp circuit breaker. A 4-wire range
power cord or a 4-wire conduit connection may be used. Refer to below if you
have a 3-Prong outlet.| | 4-Prong Range Power Cord or a 4-Wire Conduit
Connection (Refer to below if you have a 3-Prong outlet)
| Strain Relief (for Conduit Installations Only)
Anti-Tip BracketAn anti-tip bracket is included and must be installed. Do not
operate the range without the anti-tip bracket in place.| | Anti-Tip Bracket
Included and Must be Installed
Additional parts needed when installing on concrete floor.| | Lag Bolt or
1/2″ O.D. Sleeve Anchor (Concrete Floors Only)
Optional AccessoriesPurchase by clicking the LG parts & accessories
button† or call1-800-243-0000.LG Parts
& Accessories| Rear FillerIf the counter does not bridge the opening at the
rear wall, the rear filler kit that is provided with the slide-in range, will
be needed.| | Rear Filler Included
Side Filler Kit (2 pieces)Prevents spills or food residue from sliding in-
between the range and countertop. The kit is installed with adhesive, no
mounting brackets or screws needed.| | LSFL301S Side Filler Kit
Broiler Pan and Grid| _| Broiler Pan – Part Number Coming Soon
| Grid Pan – Part Number Coming Soon
Air Fry Rack| | Air Fry Rack – LRAL302S(For use with models with Air Fry
feature: LSEL6337, LSEL6335, LSEL6333; these models include an Air Fry Tray
/ Basket that sits on an existing oven rack, the Air Fry Rack is a standalone
rack accessory)
What Accessories Do I Need to Purchase
for My LG Gas Freestanding Range?Items in RED with a check box require you to make a purchase Items in BLACK with a check box are optionalItems in BLACK without a box are included with purchase.
| STEP 1:
FIND YOUR MODEL NUMBER
---|---
LDG4313ST, LRGL5825(F, D), LRGL5823(S, D), LRGL5821_(S, D)
STEP 2: READ THIS INFORMATION| STEP 3:
IDENTIFY THE ITEMS YOU NEED TO PURCHASE FOR YOUR MODEL NUMBER
Required Accessories Purchase from dealer links, in-store with unit
purchase, or if part is available, click the LG parts & accessories button† or
call1-800-243-0000.LG Parts &
Accessories| Electrical RequirementsLG Gas Freestanding Ranges have a 3-prong
power cord attached to the unit. A 120 V, 60 Hz, properly grounded dedicated
circuit protected by a 15 or 20 Amp circuit breaker, or slow blow fuse is
required.| | 3-Prong Power Cord Attached to Unit
Installation Parts Required for Gas Hookup| | Gas Line Shut-Off Valve Joint
SealantFlexible Metal Appliance Connector (3/4″ or 1/2″ NPT x 1/2″ I.D.)Flare
Union Adapter for Connection to Gas Supply Line (3/4″ or 1/2″ NPT x 1/2″ I.D.)
Flare Union Adapter for Connection to Pressure Regulator on Range (1/2″ NPT x
1/2″ I.D.)
Anti-Tip BracketAn anti-tip bracket is included and must be installed. Do not
operate the range without the anti-tip bracket in place.| | Anti-Tip Bracket
Included and Must be Installed
Additional parts needed when installing on concrete floor.| | Lag Bolt or
1/2″ O.D. Sleeve Anchor (Concrete Floors Only)
LP Conversion KitIf your home uses Liquid Propane (LP) instead of Natural Gas
(NG), utilize the LP Conversion Kit.| | LP Conversion Kit Included
Optional AccessoriesPurchase by clicking the LG parts & accessories button†
or call1-800-243-0000.LG Parts &
Accessories| Broiler Pan and Grid| _| Broiler Pan – Part Number Coming
Soon
| Grid Pan – Part Number Coming Soon
Air Fry Rack| | Air Fry Rack – LRAL302S(For use with models with Air Fry
feature: LRGL5825, LRGL5823)
What Accessories Do I Need to Purchasefor My LG Electric Freestanding Range?
Items in RED with a check box require you to make a purchase Items in BLACK
with a check box are optionalItems in BLACK without a box are included with
purchase.| STEP 1: FIND YOUR MODEL NUMBER
---|---
LDE4413ST, LREL6325(F, D), LREL6323(S, D), LREL6321(S, D)
STEP 2: READ THIS INFORMATION| STEP 3: IDENTIFY THE ITEMS YOU NEED TO PURCHASE
FOR YOUR MODEL NUMBER
Required AccessoriesPurchase from dealer links, in-store with unit purchase,
or if part is available, click the LG parts & accessories button† or
call1-800-243-0000.LG Parts &
Accessories| Electrical RequirementsLG Electric Freestanding Ranges require a
240/208 V, 60 Hz, properly grounded dedicated circuit protected by a 40 or 50
Amp circuit breaker. A 4-wire range power cord or a 4-wire conduit connection
may be used. Refer to below if you have a 3-Prong outlet.| | 4-Prong Range
Power Cord or a 4-Wire Conduit Connection (Refer to below if you have a
3-Prong outlet)
| Strain Relief (for Conduit Installations Only)
Anti-Tip BracketAn anti-tip bracket is included and must be installed. Do not
operate the range without the anti-tip bracket in place.| | Anti-Tip Bracket
Included and Must be Installed
Additional parts needed when installing on concrete floor.| | Lag Bolt or
1/2″ O.D. Sleeve Anchor (Concrete Floors Only)
Optional Accessories
Purchase by clicking the LG parts & accessories button† or call1-800-243-0000.LG Parts & Accessories
| Broiler Pan and Grid| _| Broiler Pan – Part Number Coming Soon
| Grid Pan – Part Number Coming Soon
Air Fry Rack| | Air Fry Rack – LRAL302S(For use with models with Air Fry
feature: LREL6325, LREL6323 )
What Accessories Do I Need to Purchase for My LG Over-the-Range Microwave?tems
in RED with a check box require you to make a purchase Items in BLACK with a
check box are optional Items in BLACK without a box are included with
purchase| STEP 1:
FIND YOUR MODEL NUMBERLSMC3086SS, LMVH1711ST, LMHM2237(ST, BD), LMH2235ST ,
LMVM2033ST, LMV2031(SS, ST, BD, SB, SW), LMV1831(SS, ST, BD), LMV1764ST
STEP 2: READ THIS INFORMATION STEP 3: IDENTIFY THE ITEMS YOU NEED TO PURCHASE
FOR YOUR MODEL NUMBER
---|---
| 
STEP 2:
READ THIS INFORMATION| STEP 3:
IDENTIFY THE ITEMS YOU NEED TO PURCHASE FOR YOUR MODEL NUMBER
| Electrical Requirements LG OTRs have a 3-prong power cord attached to the
unit. A 120 V, 60 Hz, properly grounded dedicated circuit protected by a 15 or
20 Amp circuit breaker is required.| | 3-Prong Power Cord Attached to Unit
Venting Requirements LG OTRs must be properly vented in one of three ways. Do
not vent into a wall cavity, attic or unused area. Venting ductwork is not
provided and should be purchased separately. 1. Roof venting with 3″ 1/4 x 10″
duct or 6″ round duct 2. Wall venting with 3″ 1/4 x 10″| | 
Installation Parts You May Need for Outside Venting|
|
- Duct Work (The total length of the duct system, including straight duct, elbows, transitions, and wall or roof caps must not exceed 140 feet.) Roof Cap Duct Tape to seal all joints Caulking to seal the exterior roof opening around the cap
- Duct Work (The total length of the duct system, including straight duct, elbows, transitions, and wall or roof caps must not exceed 140 feet.) Wall Cap Duct Tape to seal all joints Caulking to seal the exterior wall opening around the cap
ptional Accessories Purchase by clicking the LG parts & accessories button† or
call 1-800-243-0000| Replacement
Charcoal Filter LG OTRs include 1 charcoal filter for room venting
installations (recirculating). It is recommended to change the filter every
6-12 months. Order an extra filter now to keep on-hand.| |
W hat Accessories Do I Need to Purchasefor My LG Hood?Items in RED with a
check box require you to make a purchase Items in BLACK with a check box are
optionalItems in BLACK without a box are included with purchase.| STEP 1:
FIND YOUR MODEL NUMBER
---|---
LSHD3680ST, HCED3615(S, D), LSHD3080ST, HCED3015(S, D)
STEP 2:
READ THIS INFORMATION| STEP 3:
IDENTIFY THE ITEMS YOU NEED TO PURCHASE FOR YOUR MODEL NUMBER
| Electrical Requirements|
| LG Hoods require a 120 V, 60 Hz, properly grounded dedicated circuit
protected by a 15 or 20 Amp circuit breaker.| 3-Wire Circuit Connection
(2-Wire with Ground)
| These Hoods must be hard wired (direct wired) into an approved junction box.
A plug and receptacle is not permitted on these products.|
Required Accessories
Purchase from dealer links, in-store with unit purchase, or if part is
available, click the LG parts & accessories button† or
call1-800-243-0000.LG Parts &
Accessories| A cable locking connector (not supplied) might also be required
by local codes. Check with local requirements and codes, and purchase and
install appropriate connector if necessary.| | Cable Locking Connector
Venting Requirements LG hoods must be properly vented in one of three ways. Do
not vent into a wall cavity, attic or unused area. Venting ductwork is not
provided and should be purchased separately. Use metal ductwork only. For best
performance, use round ducts (6″ min.) instead of rectangular, especially when
elbows are required.1. Roof Venting2. Wall Venting3. Room Venting
(recirculating)| Duct Work (The total length of the duct system, including
straight duct, elbows, transitions, and wall or roof caps must not exceed 100
equivalent feet.)Roof or Wall CapDuct Tape to seal all jointsCaulking to seal
the exterior roof opening around the cap
| Telescopic Duct Covers| | 1 Upper and 1 Lower Duct Cover IncludedLG hoods
are designed for a max. ceiling height of 9 ft. 10 in. A duct cover extension
s required for taller ceilings.
| Recirculation Kit & Replacement Charcoal Filter| |
Optional AccessoriesPurchase by clicking the Zephyr button.| A recirculation
kit is required when venting into a room instead of outside. It is recommended
to change the charcoal filter every 6-12 months. Order an extra filter now to
keep on-hand.| Recirculation Kit – ZRC-01ANReplacement Charcoal Filter –
Z0F-C091
| |
Zephyr Store| Duct Cover ExtensionCan be used for ceiling heights that are
between 9 ft. 10 in. and 12 ft.| 12 ft. Duct Cover Extension for ceiling
heights up to 12 ft. – Z1C-00AN
What Accessories Do I Need to PurchaseforMy LG Wall Oven or Speed Oven?Items
in RED with a check box require you to make a purchase Items in BLACK with a
check box are optionalItems in BLACK without a box are included with
purchase.| STEP 1:
FIND YOUR MODEL NUMBER
---|---
Single| Double| Combination| Speed Oven
WSES4728F, LWS3063(ST, BD)| WDES9428F, LWD3063(ST, BD)| WCES6428F,
LWC3063(ST, BD)| MZBZ1715(S,D)
| | |
STEP 2:
READ THIS INFORMATION| STEP 3:
IDENTIFY THE ITEMS YOU NEED TO PURCHASE FOR YOUR MODEL NUMBER
RequiredAccessories
Purchase from dealer links, in-store with unit purchase, or if part is
available, click the LG parts & accessories button† or
call1-800-243-0000.LG Parts &
Accessories| Electrical RequirementsLG Wall Ovens require a 240/208 V,60 Hz,
properly grounded dedicated circuit protected by a properly sized Amp circuit
breaker as noted.Wall Ovens must be hard wired (direct wired) into an approved
junction box. A plug and receptacle is not permitted on these products.LG
Speed Ovens require a 120 V, 60 Hz, properly grounded dedicated circuit
protected by a 20 Amp circuit breaker.| | 30 Amp Circuit Breaker with Min. #10
AWG4-Wire Circuit Connection (Refer to below for 3-wire connection)| 40 Amp
Circuit Breaker with Min. #8 AWG4-Wire Circuit Connection (Refer to below
for 3-wire connection)| 50 Amp Circuit Breaker with Min. #8 AWG4-Wire Circuit
Connection (Refer to * below for 3-wire connection)| 3-Prong Power Cord
Attached to Unit20 Amp Circuit Breaker
| Junction Box| Not Applicable
| Conduit Connector| Not Applicable
| Wire Nuts for 10 Gauge Wiring| Wire Nuts for 8 Gauge Wiring| Not
Applicable
Installation Parts| | 36” of String| Not Applicable
| Wood Shims| Not Applicable
| Trim Kit Included on LG STUDIO models only (WSES4728F, WDES9428F,
WCES6428F)| Not Applicable
What Accessories Do I Need to Purchase for My LG Gas Cooktop?
Items in RED with a check box require you to make a purchase Items in BLACK with a check box are optional Items in BLACK without a box are included with purchase.
| | STEP 1:
FIND YOUR MODEL NUMBER
---|---|---
LSCG367ST, LCG3611(ST, BD), LSCG307ST, LCG3011(ST, BD
STEP 2: READ THIS INFORMATION| STEP 3:
IDENTIFY THE ITEMS YOU NEED TO PURCHASE FOR YOUR MODEL NUMBER|
Required Accessories Purchase from dealer links, in-store with unit purchase,
or if part is available, click the LG parts & accessories button† or call
1-800-243-0000| Electrical Requirements
LG Gas Cooktops have a 3-prong power cord attached to the unit. A 120 V, 60
Hz, properly grounded dedicated circuit protected by a 15 or 20 Amp circuit
breaker, or slow blow fuse is required| | 3-Prong Power Cord Attached to Unit|
| |
| Installation Parts Required for Gas Hookup| 
|
Gas Line Shut-Off Valve Teflon Tape or a Thread Compound Pipe Fittings Joint
Sealant Flexible Metal Appliance Connector (5/8” I.D.) Flare Union Adapter for
Connection to Gas Supply Line (3/4″ or 1/2″ NPT x 5/8” I.D.) Flare Union
Adapter for Connection to Pressure Regulator on Cooktop (1/4″ NPT x 1/2″
I.D.)|
LP Conversion Kit If your home uses Liquid Propane (LP) instead of Natural Gas
(NG), utilize the LP Conversion Kit.| | LP Conversion Kit Included
What Accessories Do I Need to Purchase for My LG Electric Cooktop?Items in RED
with a check box require you to make a purchase Items in BLACK with a check
box are optional Items in BLACK without a box are included with purchase.| | |
STEP 1:
FIND YOUR MODEL NUMBER|
---|---|---|---|---
36-INCH| 30-INCH|
CBIS3618B, LSCE365ST, LCE3610SB| LSCE305ST, LCE3010SB|
| |
| |
STEP 2:
READ THIS INFORMATION| | STEP 3:
IDENTIFY THE ITEMS YOU NEED TO PURCHASE FOR YOUR MODEL NUMBER|
Required Accessories Purchase from dealer links, in-store with unit purchase,
or if part is available, click the LG parts & accessories button† or call
1-800-243-0000| Electrical Requirements
LG Electric Cooktops require a 240/208 V, 60 Hz, properly grounded dedicated
circuit protected by a properly sized Amp circuit breaker as noted. A 4-wire
conduit connection or power cord should be used.| | 50 Amp Circuit Breaker
with Min. #8 AWG 4-Wire Circuit Connection (Refer to below for 3-wire
connection)| 40 Amp Circuit Breaker with Min. #8 AWG 4-Wire Circuit Connection
(Refer to * below for 3-wire connection)|
| | Strain Relief| |
| Junction Bo| |
| Wire Nuts for 8 Gauge Wirin| |
-
A 4-wire connection is required for all mobile and manufactured home installations, as well as all new construction after January 1, 1996. A 3-wire connection is possible where local code permits.
-
ST – Smooth Black Glass w/Stainless Trim
-
B / SB – Smooth Black Glass
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>