F150LEDs 2015 – 2020 CREE LED Fog Bulbs Installation Guide
- June 9, 2024
- F150leds
Table of Contents
F150LEDs 2015 – 2020 CREE LED Fog Bulbs
Instructions
-
STEP 1
Reach under the bumper and remove the OEM Fog light bulb using a counterclockwise turn then disconnect the factory fog light harness for the OEM fog light bulb.
-
STEP 2
Connect the factory harness to the ballast from the kit then connect the ballast to the MKV Fog light bulb.
-
STEP 3
Install the MKV Fog light bulb into the fog housing by lining up the tabs on the bulb with the tabs in the housing and turning the bulb clockwise to lock it into place.
-
STEP 4
Use the provided zip ties to secure the ballast to where it will not be touching any other wires or any plastic as this unit can get hot. -
STEP 5
Repeat steps for other side of the truck
Text for support: 706-214-2618
Visit our site to chat: www.F150LEDs.com or
email [email protected]