iEi WAFER-EHL-J6412 Embedded Board Installation Guide
- June 9, 2024
- IEI
Table of Contents
iEi WAFER-EHL-J6412 Embedded Board
Package List
WAFER-EHL-J6412 package includes the following items:
- 1 x WAFER-EHL-J6412 single-board computer
- 1 x Power cable
- 1 x SATA with power cable
- 1 x QIG
Specifications
-
CPU:
- Intel® Celeron® J6412 on-board SoC
(up to 2.6GHz, quad-core, 1.5M cache, TDP=10W)
- Intel® Celeron® J6412 on-board SoC
-
Memory:
- On-board 8GB 3200 MHz LPDDR4x
-
BIOS:
- AMI UEFI BIOS
-
Graphics Engine:
- Intel® Gen11 UHD Graphics
-
Display Output:
- Triple independent display
- 1 x HDMI 1.4 (up to 3840 x 2160@30Hz)
- 1 x DP 1.4 (up to 3840 x 2160 @60Hz)
- 1 x IEI iDPM 3040 slot (only for IEI eDP/LVDS/VGA module)
-
Ethernet:
- 2 x PCIe 2.5GbE with Intel® I225V
-
External I/O Interface:
- 2 x USB 3.2 Gen 2 (10Gb/s)
-
Internal I/O Interface:
- 1 x SATA 6Gb/s with 5V SATA power connector
- 4 x USB 2.0 (2×4 pin, p=2.0)
- 2 x RS-232/422/485 (1×9 pin, p=1.25)
-
I2C :
- 1 x I2C (1×4 pin, p=1.25)
-
SMBus:
- 1 x SMBus (1×4 pin, p=1.25)
-
Audio:
- 1 x iAUDIO (2×5 pin), supporting IEI AC-KIT-888S kit
-
Front Panel:
- 1 x Power LED & HDD LED (1×6 pin, p=2.0)
- 1 x Power button (1×2 pin, p=2.0)
- 1 x Reset button (1×2 pin, p=2.0)
-
Expansions:
-
1 x M.2 2230 A key for Wi-Fi & Bluetooth
(PCIe Gen3 x1 / USB 2.0 signal) -
1 x M.2 3042/2242 B key with SIM slot
(PCIe Gen3 x2 / USB 2.0 signal) -
1 x PCIe Gen3 x4 (x2 signal: x2 or x1+x1)
-
-
Digital I/O:
- 1 x 12-bit digital I/O (2×7 pin, p=2.0)
-
TPM:
- Intel® PTT (TPM 2.0)
-
Fan Connector:
- 1 x System fan connector (1×4 pin, p=2.54)
-
Power Supply:
+ 12V DC input power (AT/ATX mode) -
Power Consumption:
12V@3.14A (Intel® Celeron® J6412 2.0GHz with on-board 8GB 3200MHz LPDDR4 memory and EUP enabled) -
Watchdog Timer:
Software programmable support 1–255 sec. system reset -
Operation Temperature: 0°C – 60°C
-
Storage Temperature: -30°C – 70°C
-
Operation Humidity: 5% – 95%, non-condensing
-
Dimensions: 146 mm x 102 mm
-
Weight: GW:850 g / NW:350 g
-
Certification: CE/FCC compliant
Ordering Information
-
WAFER-EHL-J6412-R10:
3.5″ SBC with Intel® Celeron® J6412 on-board SoC, triple display with DP, HDMI and iDPM slot, dual 2.5 GbE, USB 3.2 Gen 2, M.2, SATA 6Gb/s, COM, iAUDIO, 0°C ~60°C and RoHS -
CB-USB02A-RS:
Dual-port USB cable with bracket, 300mm, p=2.0 -
AC-KIT-888S-R10:
Realtek ALC888S 7.1 Channel HD Audio peripheral board, RoHS -
32102-000100-200-RS:
SATA power cable, MOLEX 5264-4P to SATA 15P -
32005-003500-200-RS:
RS-232/422/485 cable, 300mm, p=1.25 -
iDPM-eDP-R10:
eDP to eDP converter board (for IEI iDPM slot) -
iDPM-LVDS-R10:
eDP to LVDS converter board (for IEI iDPM slot) -
iDPM-VGA-R10:
eDP to VGA converter board (for IEI iDPM slot) -
NWR-L2S-R10:
PCIe x2 to two PCIe x1 riser card -
NWR-R2S-R10:
PCIe x2 to two PCIe x1 riser card -
CM-WAFER-WF-R10:
Cooler module (w/ fan) for 3.5″ WAFER series, RoHS -
CM-WAFER-WOF-R10:
Cooler module (w/o fan) for 3.5″ WAFER series, RoHS
Jumpers Setting and Connectors
LABEL | FUNCTION |
---|---|
J_CMOS2 | Clear CMOS button |
J_ATX_AT1 | AT/ATX power mode setting jumper |
J_DNX1 | DNX mode setting jumper |
J_FLASH1 | Flash descriptor override setting jumper |
IAUDIO | Audio connector for IEI AC-KIT-888S kit |
PWR1 | ATX 12V power connector |
BAT1 | Battery connector |
BZ1 | Buzzer connector |
DIO2 | Digital I/O connector |
CPU_FAN1 | Fan connector |
F_PANEL1 | Power LED & HDD LED connector |
PWR_BTN1 | Power button connector |
RST_BTN1 | Reset button connector |
COM1, COM2 | RS-232/422/485 serial port connectors |
S_ATA1 | SATA 6Gb/s connectors |
SATA_PWR1 | SATA power connector |
I2C1 | I2C connector |
SMB1 | SMBus connector |
JBIOS1 | Flash SPI ROM connector |
JEC2 | Flash EC ROM connector |
DEBUG_SPI1 | EC debug connector |
JUSB3, JUSB4 | Internal USB 2.0 connectors |
M2_A_KEY | M.2 A-key slot |
M2_B_KEY | M.2 B-key slot |
PCIEX4_1 | PCIe x4 slot (x2 signal) |
--- | --- |
SIM1 | SIM slot (solder side) |
IDPM1 | IEI iDPM slot |
J_LAN1, J_LAN2 | External 2.5GbE RJ-45 connectors |
J_USB1 | External USB 3.2 Gen 2×1 Type-A connector |
J_DP1 | External DisplayPort connector |
J_HDMI1 | External dual HDMI connector |
J_CMOS2: Clear CMOS Button
PIN NO.| DESCRIPTION
NC (default)| Keep CMOS Setup (Normal Operation)
Press button| Clear CMOS Setup
J_ATX_AT1: AT/ATX Power Mode Setting Jumper
PIN NO.| DESCRIPTION
Short 1 – 2| ATX Power Mode (default)
Short 2 – 3| AT Power Mode
J_DNX1: DNX Mode Setting Jumper
PIN NO.| DESCRIPTION
Open| Normal (default)
Short| Enable DNX Boot
J_FLASH1: Flash Descriptor Override Setting Jumper
PIN NO.| DESCRIPTION
Short 1 – 2| Disable (default)
Short 2 – 3| Enable
IAUDIO : Internal Audio Connector
PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| HDA_SYNC| 2| HDA_CLK
3| HDA_SDOUT| 4| HDA_SPKR
5| HDA_SDIN| 6| HDA_RST#
7| +5V| 8| GND
9| +12V| 10| GND
PWR1: ATX 12V Power Connector
PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| GND| 3| +12V
2| GND| 4| +12V
BAT1: RTC Battery Connector
PIN| DESCRIPTION| PIN| DESCRIPTION
1| VBATT| 2| GND
BZ1: Buzzer Connector
PIN| DESCRIPTION| PIN| DESCRIPTION
1| +5V| 2| PC_BEEP
DIO2: Digital Input/Output Connector
PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| GND| 2| VCC
3| DOUT5| 4| DOUT4
5| DOUT3| 6| DOUT2
7| DOUT1| 8| DOUT0
9| DIN5| 10| DIN4
11| DIN3| 12| DIN2
13| DIN1| 14| DIN0
CPU_FAN1: Fan Connector
PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| GND| 3| FANIO
2| +12V| 4| PWM
F_PANEL1: Power LED & HDD LED Connector
PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| +5V| 4| PWR_LED-
2| GND| 5| HDD_LED+
3| PWR_LED+| 6| HDD_LED-
PWR_BTN1: Power Button Connector
PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| PWR_BTN+| 2| PWR_BTN-
RST_BTN1: Reset Button Connector
PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| Reset+| 2| Reset-
COM1, COM2: RS-232/422/485 Serial Port Connectors
PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| DCD| 6| CTS
2| DSR| 7| DTR
3| RXD| 8| RI
4| RST| 9| GND
5| TXD|
S_ATA1: SATA 6Gb/s Connector
PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| GND| 5| SATA_RX‐
2| SATA_TX+| 6| SATA RX+
3| SATA_TX‐| 7| GND
4| GND| 8| N/C
SATA_PWR1: SATA Power Connector
PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| +5V| 2| GND
I2C1: I 2 C Connector
PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| GND| 3| I2C_CLK
2| I2C_DATA| 4| +5V
SMB1: SMBus Connector
PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| GND| 3| SMB_CLK
2| SMB_DATA| 4| +5V
JBIOS1: Flash SPI ROM Connector
PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| +3.3V| 4| SPI_CLK
2| SPI_CS#| 5| SPI_SI
3| SPI_SO| 6| GND
JEC2: Flash EC ROM Connector
PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| SPI_CS#| 2| +3.3V
3| SPI_SO| 4| NC
5| EC_DET_FLASH| 6| SPI_CLK
7| GND| 8| SPI_SI
DEBUG_SPI1: EC Debug Connector
PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| NC| 4| EDICLK
2| EDICS| 5| EDIDI
3| EDIDO| 6| GND
JUSB3, JUSB4: Internal USB 2.0 Connectors
PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| VCC| 2| GND
3| USB_DATA-| 4| USB_DATA+
5| USB_DATA+| 6| USB_DATA-
7| GND| 8| VCC
M2_A_KEY: M.2 A-key Slot
PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| GND| 2| +V3.3A
3| USB+| 4| +V3.3A
5| USB-| 6| NC
7| GND| 8| Module Key
9| Module Key| 10| Module Key
11| Module Key| 12| Module Key
13| Module Key| 14| Module Key
15| Module Key| 16| NC
17| NC| 18| GND
19| NC| 20| NC
21| NC| 22| NC
23| GND| 24| GND
25| NC| 26| NC
27| NC| 28| NC
29| GND| 30| GND
31| NC| 32| NC
33| GND| 34| NC
35| PCIE_TX6+| 36| GND
37| PCIE_TX6-| 38| NC
39| GND| 40| NC
---|---|---|---
41| PCIE_RX6+| 42| NC
43| PCIE_RX6-| 44| NC
45| GND| 46| NC
47| CLK_M2_A+| 48| NC
49| CLK_M2_A-| 50| BTWIFI_SUS_CLK
51| GND| 52| WLAN_PERST#
53| NC| 54| +V3.3A_WLAN
55| +V3.3A_WLAN| 56| +V3.3A_WLAN
57| GND| 58| NC
59| NC| 60| NC
61| NC| 62| NC
63| GND| 64| NC
65| NC| 66| NC
67| NC| 68| NC
69| GND| 70| PEWAKE#
71| NC| 72| +V3.3A
73| NC| 74| +V3.3A
75| GND|
M2_B_KEY: M.2 B-key Slot
PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| WWAN_CONFIG3| 2| +3.3V_WWAN
3| GND| 4| +3.3V_WWAN
5| GND| 6| WWAN_FCP_OFF
7| USB_D+| 8| WWAN_DISABLE
9| USB_D-| 10| NC
11| GND| 12| Module Key
13| Module Key| 14| Module Key
15| Module Key| 16| Module Key
17| Module Key| 18| Module Key
19| Module Key| 20| PSE_I2S1_SCLK
21| WWAN_CONFIG0| 22| PSE_I2S1_TXD
23| PCIE_WAKE#| 24| PSE_I2S1_RXD
25| SAR_DPR_WWAN| 26| GNSS_DISABLE_N
---|---|---|---
27| GND| 28| NC
29| PCIE_RXN5| 30| WWAN_UIM_RST
31| PCIE_RXP5| 32| WWAN_UIM_CLK
33| GND| 34| WWAN_UIM_DATA
35| PCIE_TXN5| 36| UIM_PWR
37| PCIE_TXP5| 38| SSD_DEVSLP
39| GND| 40| NC
41| PCIE_RXN4| 42| NC
43| PCIE_RXP4| 44| NC
45| GND| 46| NC
47| PCIE_TXN4| 48| NC
49| PCIE_TXP4| 50| WWAN_PERST#
51| GND| 52| N/C
53| CLK_M2_B_N| 54| WWAN_WAKE#
55| CLK_M2_B_P| 56| NC
57| GND| 58| NC
59| NC| 60| NC
61| NC| 62| NC
63| NC| 64| NC
65| NC| 66| WWAN_SIM1_DET
67| WWAN_RST| 68| WWAN_SUSCLK
69| DET_OS-PCIE/
GND-SATA
| 70| +3.3V
71| GND| 72| +3.3V
73| GND| 74| +3.3V
75| WWAN_CONFIG2|
SIM1: SIM Card Slot
PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
C1| SIM_VCC| C5| GND
C2| SIM_RST| C6| NC
C3| SIM_CLOCK| C7| SIM_DATA
J_LAN1, J_LAN2: External 2.5GbE RJ-45 Connectors
PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| MDI0P| 5| MDI2P
2| MDI0N| 6| MDI2N
3| MDI1P| 7| MDI3P
4| MDI1N| 8| MDI3N
J_DP1: External DP Connector
PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| DATA_0P| 11| GND
2| GND| 12| DATA_3N
3| DATA_0N| 13| CONFIG1
4| DATA_1P| 14| CONFIG2
5| GND| 15| AUX_P
6| DATA_1N| 16| GND
7| DATA_2P| 17| AUX_N
8| GND| 18| DP HPD
9| DATA_2N| 19| GND
10| DATA_3P| 20| DP PWR
J_HDMI1: External HDMI Connector
PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| HDMI2_DATA2| 2| GND
3| HDMI2_DATA2#| 4| HDMI2_DATA1
5| GND| 6| HDMI2_DATA1#
7| HDMI2_DATA0| 8| GND
9| HDMI2_DATA0#| 10| HDMI2_CLK
11| GND| 12| HDMI2_CLK#
13| N/C| 14| N/C
15| HDMI2_SCL| 16| HDM2I_SDA
17| GND| 18| +5V
19| HDMI2_HPD|
J_USB1: External USB 3.2 Gen 2 Connectors
PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| VCC| 10| VCC
2| USB_DATA0-| 11| USB_DATA1-
3| USBDATA0+| 12| USB DATA1+
4| GND| 13| GND
5| USB3_RX0-| 14| USB3_RX1-
6| USB3RX0+| 15| USB3 RX1+
7| GND| 16| GND
8| USB3_TX0-| 17| USB3_TX1-
9| USB3_TX0+| 18| USB3_TX1+
All the drivers and utility for the WAFER-EHL-J6412 are available on IEI Resource Download Center. Type WAFER-EHL-J6412 and press Enter to find all the relevant software, utilities, and documentation. To install software from the downloaded ISO file, mount the file as a virtual drive to view its content.
IEI Resource Download Center https://download.ieiworld.com
Board Layout
Jumper and Connector Locations
(Unit: mm)
Documents / Resources
| iEi
WAFER-EHL-J6412 Embedded
Board
[pdf] Installation Guide
WAFER-EHL-J6412 Embedded Board, WAFER-EHL-J6412, Embedded Board, Board
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>