ENJOYWOOD CEL-E10 10W Laser Engraving Machine Instruction Manual
- June 9, 2024
- ENJOYWOOD
Table of Contents
CEL-E10 10W Laser Engraving Machine
Instruction Manual
① UP-X
② DOWN-X
③ RIGHT-Y
④ LEFT-Y
⑤ UP-STAND
⑥ DOWN-STAND
⑦ X-AXIS
⑧ LASER MOUDLE
⑨ 7× M525MM SCREW
⑩ 7× M5i4MM SCREW
⑪ 5× M5*6 SCREW| ⑫ 4× T NUTS
⑬ 1× WRENCH
⑭ 2× ROLLER BELT
⑮ 1× POWER PLUG
⑯ 1× PC CONNECT CABLE
⑰ 1× TF CARD
⑱ 1×DUST-FREE CLOTH
⑲ 1×FOCUS BOARD
⑳ ENGRAVER MATERIAL
㉑ NYLON ROPE
㉒ CLEANING BRUSH
---|---
STEP 1 FRAME INSTALL
①+②+③+④ ⑨ 8PCS M5*25 SCREW
STEP 2 ADJUST THE WHEEL TO LOSE
⑦ X-AXIS ⑬ WRENCH
STEP 3 X-AXIS INSTALL
⑦ X-AXIS
STEP 4 STAND INSTALL
⑤ UP-STAND
⑥ DOWN-STAND
⑩ 7 × M4i4MM SCREW
⑪ 1 × M56MM SCREW
STEP 5 ROLLER BELT INSTALL
⑪ 4× M56 SCREW
⑫ 4× T NUTS
⑭ 2× ROLLER BELT
⑭ The sawtooth side is downward, inserted from the small holes at the left and
right ends of ⑤ or ⑥.
When the belt slides into the track and passes the pulley, it is wound as
shown in the picture
Fixing the belt: put ⑫ into the ③ and ④ chute.
Fix ⑫ with 4×m56mm screws, so as to compress the belt
STEP 6 LASER MOUDLE
⑧LASER MOUDLE
STEP 7 LINE CONNECTION
Finish!
Use ENJOYWOOD CEL-E10 starts to create your works!
