Beyonics XRT270 Remote Control User Manual
- June 4, 2024
- Beyonics
Table of Contents
BEYONICS XRT270 Remote Control
Rev A
Date: 06.06.2022
User Manual
XRT270 Remote Control
Revision History
| Sect.| Description| By
---|---|---|---
Rev| Date
A| 6/6/2022| All| Initial Release| Jack Qi
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
Overview/ Purpose:
To help users quickly get started with Beyonics’s XRT270 Remote Control Unit
(RCU).
Package inclusions:
In this packaging: XRT270 Remote control built by Bionics.
Not Included: 2x AAA alkaline batteries, VIZIO SmartCast TV.
Steps:
-
Insert 2x AAA alkaline batteries into RCU.
-
Check RED LED blinks. (The status LED will flash until paired successfully)
-
Test keys’ IR functionality with VIZIO TV by pressing keys ONE by ONE.
All keys will be responded to following the below table. -
Press MIC and MUTE keys to relaunch pairing mode.
-
Pair RCU with VIZIO TV, and follow the below steps to set up.
Go to TV setting: -> Voice Remote->Unpair Remote, unpair previous RCU.
|
---|---
Once paired successfully, the screen will be shown on the next page.|
6. BLE-HID key functional Test: All 22 keys are available in BT mode on VIZIO TV.
Bluetooth 2400MHz ~ 2483.5MHz Power 2.19mW PCB Antenna Gain 1.0dBi
Notes：
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>