BFOUR BF-5-02 Bluetooth Meat Thermometer User Manual
- June 9, 2024
- BFOUR
Table of Contents
BFOUR BF-5-02 Bluetooth Meat Thermometer
DIAGRAM
COMPATIBLE MODELS
- iPhone 4S and above
- iPad 3rd generation and above and all iPad mini
- Android 4.4 and above
- All Bluetooth 4.0 models and above
Download the APP
Get the Grill 5.0 app from Google Play or the Apple Store, or scan the
following QR code to download it.
Download link：
http://www.szbfour.com/templates/default/Grill5.0.apk.1.
OPERATION INSTRUCTION
Turn on the device
Press and hold the power button for 3s until the LCD display lights up with
two“beeps”, and insert the probes into the probe socket.
Pair with smartphone
- Open your phone’s GPS and Bluetooth first before using the APP.
- Make sure you have done the first step, and then open the Grill 5.0 APP, turn on the “Hcitool scan” wait to find the device, and then pair it with your phone.
Notice:
- You must make sure GPS and Bluetooth are opening. Because it will affect the connection.
- Our App can not connect 2 or more phones at the same time.
- If your phone asks for your PIN number, please see more details on Page 5.
- You can scan the QR code to watch the video on how to connect and set up the App.
Quick Start
- Insert the probes into the food, select the corresponding food, and target temperature on the APP according to your needs.
- When the target temperature is reached, both the device and the smartphone will alarm. Short press the button or click“OK” on the smartphone, the alarm will stop.
- When setting the temperature range, if the current temperature is lower or higher than the temperature range, the device and smartphone will alarm. Even you stop the alarm, the display still continues to flash.
Power OFF
Press and hold for 3s. The device will power off with two“beeps”.
APP DESCRIPTION
11 Preset meat temperature settings, you can also set up the personally needed temperatures.
Note:
- Click “OK/All Alarm” on a smartphone is close the current alarm or close all the current alarms.
- The alarm interval is 5 minutes and can be customized on the APP.
- The food target temperature and temperature range can be customized.
PRODUCT SPECIFICATIONS
- Model: BF-5(Black/White/Bright Black) Display: FSTN LCD
- Temperature accuracy: ±1%
- Battery life: >200 hours
- Wireless connection range: 60 meters/196ft
- Support probe numbers: Up to 6 probes
TROUBLESHOOTING
Q: Why does our App need to ask for your location (GPS)? It is safe?
A: Because our app uses Bluetooth function, and this is abided by the
Framework Agreement of Android and iOS. Any Bluetooth app must request
location permission. Our application won’t ask and use your WLAN/Celluar, so
turn on the location just because of the Android and iOS rules. We are unable
to see and receive your location.
Q: What is the PIN code? Why can’t connect to the APP?
A: You can’t connect devices on your phone’s system via PIN. App download
and use require acceptance of location terms. The connection method is to open
the device first, then open the “Grill 5.0” App on the phone, search through
the search page, click “hcitool scan”, and search for “Grill BT5.0” in a few
seconds, click to enter use.
Q: Why not wireless?
A: Wireless refers to the Bluetooth connection between the device and the
phone, not the connection between the probe and the device. This has the
advantage of not having to stare at the temperature display of the device all
the time.
Q: Why always disconnect the Bluetooth connection?
A: The product uses Bluetooth Low Energy (BLE) technology with Bluetooth
5.0 module (TI‘s CC26 40). In an open and unobstructed environment, it can
reach a distance of 70 meters; but it does not penetrate the wall well. The
characteristic of this Bluetooth technology is that as long as the device is
connected, no matter the signal strength, it can be used normally.
Q: LLL on the display
A: Temperature exceeds range: 33℉~572℉（1℃~300℃）or the probe is damaged
Q: Why does the display keep flashing after setting the temperature
range?
A: Only when the current temperature is within the temperature range, the
display can return to normal. If it is lower or higher than the temperature
range, the device and mobile phone will alarm with the flashing display.
Q: Why no data is displayed after powering on?
A: If the probe is not plugged into the socket after powering on, the
device will not display temperature and auto power off after 3 minutes.
WARNING
- Do not touch the stainless portion of the probe during or right after measuring temperatures since it will be hot.
- Keep away from water since the thermometer and cables are not waterproof.
- Do not place the probes or probe cable directly in a burning flame.
- Do not damage the sensor tip, it will affect the use.
Notes on the probe
- Do not put the probes and cable directly in the fire flame.
- The temperature probes of this meat thermometer can’t be submersible for cleaning.
- Clean and dry the probe thoroughly after each use with a damp cloth.
- Always insert the probe upright into the thickest part of the meat while avoiding fatty or bony areas. Avoid direct contact between the open flame and the probe and cable to cause excessive temperature and damage to the probe.
NOTE
If you want to confirm the accuracy of the probe or equipment, it is
recommended that you test in ice water or boiling water. If you think the
temperature of the probe is not accurate, please contact us at
edison@szbfour.com, we will provide a free
warranty or replacement service.
MORE PRODUCT VIDEO
Customer service:
edison@szbfour.com
Website: www.szbfour.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>