GUPUP WFDS018 LED Strip Lights User Guide
- June 9, 2024
- gupup
Table of Contents
GUPUP WFDS018 LED Strip Lights
Specification
- COLOR: Multicolor
- BRAND: GUPUP
- INDOOR/OUTDOOR USAGE: Indoor
- SPECIAL FEATURE: Color Changing
- LIGHT SOURCE TYPE: LED
- POWER SOURCE: Corded Electric
- LIGHT COLOR: Color-changing led strip light
- CABLE LENGTH: 100 Feet
- THEME: Music
- OCCASION: Christmas
- CONTROLLER TYPE: Remote Control
- CONNECTIVITY PROTOCOL: Bluetooth
- NUMBER OF LIGHT SOURCES: 24
- WATTAGE: 60 watts
- CONTROL METHOD: Voice
- ITEM WEIGHT: 10.8 ounces
- ASSEMBLED LENGTH: 7 inches
- ASSEMBLED WIDTH: 7.1 inches
Introduction
Two rolls of 50-foot light strips are plenty to cover every square inch of your room, including the hallway, living room, and stairway. Multiple scenarios are supported by lighting that is both bright and dimmable. Memory feature: When you use the lights again, they automatically remember the last mode settings. Timer Function: Simply regulate your lights to provide a sense of intelligence to your life while saving time and difficulty. Multi-scene mode: The light strip has 64 different scene modes that you may use to beautify your home.
Using an app or 24-key remote control, dim the LED lights in the room. You can select from a variety of modes, including Flashing, Quick, Jump, and Fade. To fit different settings, you can freely select from 16 million different colors and change the light’s brightness from 1% to 100%. The built-in sensitive microphone in this ambience allows the lights to change color in time with the music and the spoken rhythm. The lights can be securely adhered to clean surfaces such as lacquered or wooden walls using 3M adhesive. The entire set of equipment is also incredibly simple to install and can be inserted.
UNIQUE FUNCTIONS OF THE BLUETOOTH APP
- DIY TO CUSTOMIZE YOUR COLORS The APP provides practically infinite color options and brightness adjustments. The colors of the LED strips can be customized to fit different settings. There are 22 different dynamic modes that you can use to have fun and be happy at home.
- SYNC TO MUSIC AND MIC The smartphone music can cause the intelligent LED strip lights to “dance.” Playing on your phone while experiencing the wonderful beat is possible. The LED strip lights and the high sensitivity microphone incorporated into the software can change colors and modes in response to outside sounds.
- TIMING FUNCTION You may schedule the Bluetooth LED lights to turn on and off at specific times using the timing option, which is both practical and effective. The Bluetooth LED light for the bedroom is a great option for surprising and enchanting.
WARM TIPS
- CUTTABLE DESIGN
Due to the extreme length of the RGB Lights Strip, it can be trimmed along the cutting point to fit smaller locations. Note: For re-connection, 4-pin connectors must be purchased separately.
- ARROW TO +12V
To successfully connect the light strip, please ensure that the arrow and the +12V are on the same line. Before installation, please make sure the LED light is operational.
- PULL OUT THE PLASTIC CHIP
Do not forget to remove the plastic chip and turn the device on. To properly illuminate the LED light strips, point the remote control at the sensor. The remote can accommodate your basic demands thanks to its static colors and brightness controls.
HOW TO USE THE BLUETOOTH APP CORRECTLY
- Please open the Bluetooth on your phone by going to the settings.
- You can get the APP by scanning the QR Code or by searching for “Apollo Lighting” in the App Store or Google Play.
- Pressing the On/Off button while the Apollo app is open will automatically connect the LED lights.
FAQs
Can these be used outdoors?****
No, they are for indoors only. The outdoor led light strips have an epoxy coating over the entire roll of lights.
will this work on any phone? I have an iPhone 6 s and I don’t know if I can get the app on my phone I want to get the app before I purchase this.****
it should be on there.
How does it stick?****
Great, very sticky. No issues staying on to our painted wall.
When I cut it, how do I make the cut part work?****
If I am not mistaken you cannot make what you cut off work. that is so you can shorten it to get the proper fit.
How far apart is each individual light? Or, how many total .lights are on the 50ft strip so I can do the math myself?****
18 LEDs/ meter on the light strip.
How many total led lights?****
This is 2 rolls of 50ft, and there are 540 light beads in total.
I want to install them under the bed. Will these light strips get hot?****
No, they do not get hot at all.
How to install this led lights at the corner?****
I just press my strip into the corner if this is what she is asking.
Can I control this strip led lights from my cell phone when I’m not at home?****
It utilizes Bluetooth, so no. My daughter has these in her bedroom upstairs and I have them in my office downstairs. They’re far enough apart that mine won’t connect to her room, so you definitely have to be in the house and within 30’ Bluetooth range.
I did not get remote or the USB box and the light strips are not even 50 ft?****
This isn’t where you come for that. You have to message Amazon if they shipped from there or the seller.
When will I get my refund since I didn’t receive the package?****
You should contact the seller.
Its support 220volts?****
No this is a US system is for 110 volt.
Do they work with Alexa?****
Unfortunately, I do not own an Alexa, so I couldn’t answer that. But what I can tell you is it works with the iPhone 13.
Can you hook the lights up to a light switch instead of the wall with a magnitude box?****
Unfortunately, not but plug your box into a plug you can operate from a switch I turn my switch on and off without using the remote. I only use it to change colors.
Is it one strip of 100Ft or two 50 feet strips? If they are two 50 ft strips can I connect them without having to get another outlet?****
It is one 100ft strip!.