Guangzhou Tuoke Commerce Trade WH-E14A Blue Ocean Dream Galaxy Projector Instruction Manual

June 9, 2024
Guangzhou Tuoke Commerce Trade

Guangzhou-logo

Guangzhou Tuoke Commerce Trade WH-E14A Blue Ocean Dream Galaxy Projector

Product Introduction

Packing ListGuangzhou-Tuoke-Commerce-Trade-WH-E14A-Blue-Ocean-Dream-
Galaxy-Projector-fig-1

Product Buttons OverviewGuangzhou-Tuoke-Commerce-Trade-WH-E14A-Blue-
Ocean-Dream-Galaxy-Projector-fig-2

Direction For Use

Adjustment of Projection DirectionGuangzhou-Tuoke-Commerce-Trade-WH-E14A-
Blue-Ocean-Dream-Galaxy-Projector-fig-3

Buttons Instruction

  1. Sound Hole:
    In rhythm mode, this hole should face the sound source

  2. Timing Button:
    Short press to turn on/off the 1.5h timer function.

  3. Light Effect Mode Switch Button:
    Short press to switch light effect mode.

  4. Previous Song & Volume- Button:
    Short press the previous song, and long press to decrease the volume.

  5. Power Switch Button:
    Short press to power on/off.

  6. Next Song & Volume + Button:
    Short press for the next song, long press to increase the volume

  7. Light Rhythm Button:
    Short press to turn on/off the rhythm function (when playing music, the projection nebula will rhythm with the rhythm of the music).

  8. Built-In Audio Source & Bluetooth Mode Switch Button:
    Short press to switch the built-in audio source & Bluetooth mode; When the Bluetooth mode is turned on, the mobile phone searches for the Bluetooth name “WH-E14A” to connect to play music.

  9. Infrared Receiver:
    To receive remote control signals, this side should face the remote control.

Remote Control Instruction

Guangzhou-Tuoke-Commerce-Trade-WH-E14A-Blue-
Ocean-Dream-Galaxy-Projector-fig-13

Note:

  • Please pull out the insulating strip at the bottom of the remote control before first use.
  •  When using the remote control, need sure it points to the infrared receiver of the lamp body, and keeps the distance within 5 meters.

Guangzhou-Tuoke-Commerce-Trade-WH-E14A-Blue-Ocean-Dream-Galaxy-Projector-
fig-14 Plug in Instruction

  • The product does not have a built-in rechargeable battery and needs to be plugged into a power supply for use. It needs to be connected to a suitable adapter which is plugged into the power supply. Please do not place it in a high-temperature environment
  • Please use an adapter with an output voltage of 5V/1A

Parameter Information

  • Product Name
    • Blue Ocean Dream Galaxy Projector2.0
  • Product Model
    • WH-E14A
  • Product Size
    • Φ108mm
  • Specification
    • Plug-in Remote Blue-tooth
  • Input Parameters
    • 5V 1A
  • Rated Power
    • 5W MAX

Precautions

  • DO NOT disassemble this product by yourself;
  • Please DO NOT use the product in humid and high-temperature environments;
  • The light source of the Product cannot be replaced. When the light source expires, please replace the whole Product;
  • Please cut off the power when you have not used the Product for a long time
  • When the Product is in regular use, do not place it on an inclined surface more significant than 6°;
  • Please use an adapter with compliance certification
  • Children under 14 need to use it properly in the custody of adults.

FCC Warning

changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and

  2. this device must accept any interference received, including interference that may cause undesired operation.
    Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

    • Reorient or relocate the receiving antenna.
    • Increase the separation between the equipment and the receiver.
    • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
    • Consult the dealer or an experienced radio/TV technician for help.
      This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals