HAMPTON BAY 817800 LED Linear Track Lighting Mini-Cylinder Step Head User Manual

June 9, 2024
HAMPTON BAY

HAMPTON BAY 817800 LED Linear Track Lighting Mini-Cylinder Step Head

HAMPTON-BAY-817800-LED-Linear-Track-Lighting-Mini-Cylinder-Step-Head-
product-img

Item # 1004613003,1004612938,1008362347,1008362340, 1008362339,1008362344
Model # 813930(173051-WH),813770(173051-BK) 817800(173057A-WH),817780 (173057A-BK) 817740(173058-BK),817760(173058-SN)

THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this LED linear track head. We strive to continually create quality products designed to enhance your home. Visit us online to see
Our full line of products is available for your home improvement needs. Thank you for choosing Hampton Bay!

Warranty

5-YEAR LIMITED WARRANTY

  • The manufacturer warrants this lighting fixture against defects in materials and workmanship for a period of five years from the date of purchase. If within this period the product is found to be defective in material or workmanship, the product must be returned, with a copy of the bill of sale as proof of purchase, to the original place of purchase.
  • The manufacturer will, at its option, repair, replace, or refund the purchase price to the original purchaser or consumer. This warranty does not cover light bulbs or the fixture becoming damaged due to misuse, accidental damage, improper handling and/or installation, and specifically excludes liability for direct, incidental, or consequential damages. As some states do not allow exclusions or limitations on an implied warranty, so the above exclusions and limitations may not apply.
  • This warranty gives you specific rights and you may also have other rights that vary from state to state. Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.hamptonbay.com

Safety Information

IMPORTANT SAFETY INSTRUCTIONS

(Save These Instructions)

WHEN INSTALLING OR USING THIS TRACK SYSTEM, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED INCLUDING THE FOLLOWING:

  • Read all installation instructions. Save these instructions and refer to them when additions to or changes in the track configuration are made.
  • Do not install any part of this system less than 7 ft. above the floor.
  • Do not install any lamps closer than 6 in. from any curtain or similar combustible material.
  • All electrical connections must be in accordance with local codes and the National Electrical Code.
  • If you are unfamiliar with methods of installing electrical wiring, secure the services of a qualified licensed electrician.
  • This equipment has been tested and tound to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Ihese limits are designed to provide reasonable protection against harmful interterence in a residential installation. ThiS equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause narmful interterence to radio communications. However, there is no guarantee that interference
  • Will not occur in a particular installation. if this equipment does cause harmtul interference to radio or
  • Television reception, which can be determined by turning the equipment off and on, the uSer Is encouraged to try to correct the interierence by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
  • Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
  • FCC responsible party name :Year Young Industrial Corporation laddress: 7390 McGinnis Fery Road, Suite 200, SUwanee, GA 30024 /Telephone number :678-765-2995.
  • WARNING : Do not install this lighting system in a damp or wet location.
  • CAUTION : Keep the lamp away from materials that may burn.
  • CAUTION : The LEDs in this product are not replaceable.
  • IMPORTANT : For use with Hampton Bay EC series line voltage track system only.

Pre-Installation

PACKAGE CONTENTS

Note: Some fixture shapes may vary, not shown for all models but the same assembly method.HAMPTON-BAY-817800-LED-Linear-Track-Lighting-Mini-Cylinder-
Step-Head-fig- \(6\)

TOOLS REQUIRED

Installation

Installing the track head to the track

  • NOTE : The ground side of the track head (A) connector is the side with two metal tabs. The ground side of the track section has an indented groove on the face and two internal copper strips.

  • The track head (A) can only be assembled if the ground sides of the track head (A connector and the track section are aligned.
    ldentify the ground side on the track head (A) connector and track section (sold separately).

  • Push the top portion of the track head (A) connector into the slot of the track section.

  • Pull down the connector’s locking tab (B).

  • Twist the ground side of the track head (A) connector toward the ground side of the track section until the track head (A) connector snaps into place.

HAMPTON-BAY-817800-LED-Linear-Track-Lighting-Mini-Cylinder-Step-Head-fig-
\(2\)

Care and Cleaning

CAUTION : Do not use chemical solvents or harsh abrasives to clean the fixture or components, as damage may occur.

  • To clean the fixture, first disconnect the power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box.
  • Use a dry or slightly dampened, clean cloth (use clean water, never use a solvent) to wipe the interior and exterior surfaces of the fixture.
  • Allow the fixture to dry completely before power is restored.

Luminous Intensity Distribution

HAMPTON-BAY-817800-LED-Linear-Track-
Lighting-Mini-Cylinder-Step-Head-fig- \(4\)

Operation

  • Removing the track head from the track
  • To remove the track head (A) from the track section, first allow the track head (A) to cool down.
  • Pull dovwn on the track head connector’s locking tab (B), and twist until the track head (A) disengages.

HAMPTON-BAY-817800-LED-Linear-Track-Lighting-Mini-Cylinder-Step-Head-fig-
\(5\)

Troubleshooting

HAMPTON-BAY-817800-LED-Linear-Track-Lighting-Mini-
CylindHAMPTON-BAY-817800-LED-Linear-Track-Lighting-Mini-Cylinder-Step-Head-
fig- \(7\)er-Step-Head-fig- \(7\)

Questions, problems, missing parts? Before returning to store,call Hampton Bay Customer Service
7 a.m.-6 p.m., EST, Monday – Friday, 9 a.m. -6 p.m., EST Saturday 1-855-HD- HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

HAMPTON BAY User Manuals

Related Manuals