MAXIM 40623 Clyde VX Medium Outdoor Wall Sconce User Manual
- June 9, 2024
- MAXIM
Table of Contents
MAXIM 40623 Clyde VX Medium Outdoor Wall Sconce User Manual
Before Getting Started
- Read the instructions carefully prior to assembling the product.
- When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside.
- Carefully remove all packaging materials and retain for future use. Keep all hardware parts and packaging out of reach of small children.
- Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
- Ensure that you have all required contents for complete assembly
- Take care when lifting. Assemble the product in close proximity to where you intend to position the item.
- Do not over tighten the screws and bolts as this may damage the threads.
- Do not let children play with this product.
- Risk of suffocation!
Keep any packaging materials away from children.
Contents
Before getting started,ensure the package contains the following components:
-
Fixture x1
-
Screw 8/32 *25mm x2
-
Glass x1
-
Socket cup x1
-
Wire Nut x3
Lamp Care Instructions
- Carefully read through the instruction sheet before assembly and using the product.
- Caution there is a risk of shock. Disconnect from power source before assembling or cleaning.
- Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
- Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
- Do not plug the product in if cord is torn or frayed.
- **** For outdoor use, caulk around fixture with silicone sealant to prevent water intrusion.
Installation Instructions
-
This step requires removing the mounting plate from the fixture.
-
Caulk around backplate where fixture meets the wall leave a hole at the bottom to allow water to escape.
Cleaning & Maintenance
- Apply a high quality car wax to the fixture regularly to protect from environmental factors that can damage the metal.
- Clean with soft cloth and a mild detergent. DO not use abrasive cleaner.
- Periodically (every 90 days) make sure that the screws are fully tightened.
- Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>