MAXIM 12228 Library 1-Light Floor Lamp Instruction Manual
- June 9, 2024
- MAXIM
Table of Contents
MAXIM 12228 Library 1-Light Floor Lamp Instruction Manual
Light Source : 1 X E26 Medium Base100W(Not Included)
Made in Vietnam
Before Getting Started
- Read the instructions carefully prior to assembling the product.
- When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside.
- Carefully remove all packaging materials and retain for future use.
- Keep all hardware parts and packaging out of reach of small children.
- Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
- Ensure that you have all required contents for complete assembly.
- Take care when lifting. Assemble the product in close proximity to where you intend to position the item.
- Do not over tighten the screws and bolts as this may damage the threads.
- Do not let children play with this product.
Risk of suffocation!
Keep any packaging materials away from children.
Lamp Care Instructions
- Carefully read through the instruction sheet before assembly and using the product.
- Caution there is a risk of shock. Disconnect from power source before assembling or cleaning.
- Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
- Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
- Do not plug the product in if cord is torn or frayed.
Cleaning & Maintenance
- On polished finishes, often using talc powder reduces the appearance of fingerprints and other smudges.
- For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, acrylic polish, and wood polish.
- Clean with soft cloth and a mild detergent. DO not use abrasive cleaner.
- Periodically (every 90 days) make sure that the screws are full tightened.
- Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.
Contents
Before getting,started,ensure the package contains the following components:
A|
Body
| x1
---|---|---
B|
STEM
| x1
C|
BASE
| x1
D|
FELT PAD
| x1
E|
SHADE
| x1
F|
SOCKET RING
| x1
Assembly Instructions
- Attach lower section (B) of lamp assembly to base (C) by turning clockwise as shown.
Read User Manual Online (PDF format)
Loading......