GilmanCreek 1635574 Leather Power Swivel Glider Recliner Instruction Manual
- June 9, 2024
- GilmanCreek
Table of Contents
GilmanCreek 1635574 Leather Power Swivel Glider Recliner Instruction Manual
WARNING
If unit must be moved do not drag.
2 people recommended for handling and assembly
Do not sit on arm rest.
Do not sit on back rest.
ASSEMBLY
A: SEAT CUSHION
B: BACK CUSHION
-
Lift seat back in to position.
-
Align seat back over metal arms and slide into place. Apply even downward pressure until the back is fully seated onto the metal arms.
-
Affix back cover to bottom of the frame using the built in hook and loop fastener strip.
-
Insert plug into power oulet or surge protected power strip.
DISASSEMBLE
Pull the plug out of the power outlet.
Remove hook amd loop fastener.
Release metal locks
TROUBLESHOOTING
The first case:
Product does not recline the seat cushion does not work
CHECK THE POWER CORD PLUG
- Make sure the outlet is working property. Check fuses and breaker box; plug in a lamp to ensure the outlet is working.
- Confirm the power cord plug is firmly cord plug is firmly inserted into the outlet. Try unplugging and reinserting the power cord.
- Make sure the power cord is not damaged or pinched.
- If the product still does not recline procced to the next step.
Chick connection to transformer
- Verity the AC power cable is firmly connected to the transformer as shown here.
- Carefully examine the connection to each wire by gently wiggling each wire to determine if any are loose.
- If the product still does not recline proced to the next step.
CHECK INDICATOR LIGHT ON TRANSFORMER
- Tip fumiture forward untill the underside is viseble. Ensure the frmiture is stable or supported by another person.
- A green light on the transformer indicates that it is functional. Proceed to step4.
- If no lighty is presint contact our customer service team. Please be ready with a picture of the barcode tag from undeneath the footrest.
CHECK POWER TO SWITCH, CONTACT OUR SERVICE TEAM
- If the switch has a USB charging port, please ensure it is functional. If it does not provide power or if your particular item does not have this USB port please contact our service team.
THE SECOND CASE: IF PRODUCT RECLINES BUT HEADREST DOESNT FUNCTION
The headrest does not work
CHECK THE PRODUCT POWER CORD CONNECTION
- Lift lower back cover and check connection, if headrest still not function please contact our service team.
WARNINGS
- Before using reclining furniture, check if the mechanism is restrained by a plastic strap. If so, use scissors to remove.
- Do not allow children to play with the mechanism.
- If swueaks are head when reclining lightly apply a store bought spray on lubricant to all hinges, joints and springs.
- Do not use power reclining furniture in the presence of flammable or explosive gases.
- Do not use in an okverly humid environment.
- During the installation the power supply must be disconnected. The power supply shoukd be connected only after the installation is complete.
CARE & MAINTENANCE OF LEATHER
- Periodic dusting will prolong the life of the leather.
- General cleaning can be done with a damp, clean, soft white cloth.
- Periodically, a mild leather home furnishings cleaner can be used on the headrests and armrests. This will help prevent buildup of body and hair oils which can harm the leather over time.
- For more stubborn stains, a mild leather cleaner can be used or consult a professional leather technician.
PRODUCT WARRANTY
1-year warranty on leather against splitting, peeling, and / or tearing.
1-year warranty on internal and external frame structure.
1-year warranty on cushioning material, seat springs and mechanism.
FCC marking:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference. (2) This device must accept any interference received, including
interference that may cause undesired operation.
FCC instruction:
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION
- For your security, please carefully read instructions before charging.
- The USB charger may not be compatible with all digital electronic devices.The max output voltage is 5 V, max current is 2 A. Only the digital electronic devices requiring charge within this range may be charged by the USB port.
- Operation is subject to the following two conditions:
(1). This charging device may not cause interference;
(2). This charging device must accept any interference, including interference that may cause undesired operation of the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>