GHome Smart SW6 2 Wi-Fi Switch User Guide
- June 2, 2024
- GHome Smart
Table of Contents
GHome Smart SW6 2 Wi-Fi Switch
Specification
- OPERATION MODE: OFF-NONE-ON
- CURRENT RATING: 15 Amps
- OPERATING VOLTAGE: 120 Volts
- CONTACT TYPE: Normally Open
- CONNECTOR TYPE: Plug In
- BRAND: GHome Smart
- SWITCH TYPE: Rocker Switch
- TERMINAL: Screw
- MATERIAL: Plastic
- ITEM DIMENSIONS LXWXH: 04 x 2.36 x 5.08 inches
Introduction
The intelligent 3-way switch can be set up for 3-way or single-pole use so that the light can be controlled from one or two locations. Utilize our 3-way smart switch to replace one of your conventional 3-way switches, or use 3-way switches directly to control the light from two locations. Make your lightbulbs smart by using a free smartphone app to control them from anywhere. Both Google Assistant and Amazon Alexa are compatible with Smart Switch. You can voice-control your light to free up your hands; simply speak the orders to benefit from voice control’s amazing ease. You no longer have to worry about forgetting to turn off your gadgets with the Wi-Fi Light Switch with Timer.
Set timers or countdowns to automate your home’s lights based on your daily habits, or create a scene to cause your light bulb to flicker in order to alert prospective burglars for home security while you are away. Neutral Wire Is Required; Not a Dimmer. Only 2.4GHz (not 5G) Wi-Fi is available. The user manual for the Alexa switch for a three-way smart switch walks you through a simple, step-by-step installation. A 3-way switch must be placed with LIVE wire in order to connect to conventional light switches (in front of the regular switch). The smart light switch has a modern, practical appearance. The wall plate is composed of PC V0 class flame retardant material, which guards against overloading the electrical system and extends the life of the product.
ATTENTION
- Your house was built or remodeled before mid-80’s, probably no neutral wire (But Neutral Wire is Required)
- Require 2.4GHz Wi-Fi and no hub required
- Single Pole/ 3-Way (Not Dimmable Switch)
- Not compatible with smart blub
HOW TO CONNECT TO WIFI
- Login account, add your device
- Choose 2.4G Wi-Fi (2.4G Wi-Fi Only)
- Connect your device
- Reset the device
HOW TO PAIR WITH THE APP
- Install an app after downloading it.
- Launch the app, then register an account.
- Include the gadget from the top right corner. Select “our switch” by tapping “+.”
- Set up your Wi-Fi connection as directed by the APP.
- If the LED indication flashes quickly after pressing any ON/OFF button for 5 seconds, the reset was successful. Available and waiting for connection is EZ mode.
- Or, if the LED indication is flashing quickly, push either of the ON/OFF buttons for 5 seconds to calm down the blinking. When the AP mode is selected, select the “SmartLife-XXX” hotspot to connect to. Wait for the connection to establish itself.
FAQs
Is this switch UL listed?
There is no UL listing mark on the product, box, or manual. There is an ETL listed marking in the manual only, but not on the product or the box. ETL is another nationally recognized testing lab.
What does it mean to be “3 way”?
The 3-way switch is designed to turn on/off the light at 2 places, but could not control the speed and brightness. The 3-way switch also could be used as the single-pole switch
Can this switch work with a conventional (Non-Smart) 3-way switch as the pair?
Yes, I installed on of mine that way for my laundry room!
What is the name of the app?
This 3-way smart switch can work in Gosund APP.
My switch blinks red and green. What does it mean?
The reason for that is you have not connected it to the Wi-Fi. After your wiring, the green light indicator flashes. If you press it like a normal switch, then it won’t show green light indicator again.
I accidentally bought a 3-way switch, can I use this to my single pole wall wiring setup?
Yes, this 3-way switch also a single-pole switch, you can use this to your single pole wall wiring setup.
Do these switches turn my outdoor led par 30 flood lights completely off? I have tried two other types and they just dim but don’t go off completely.
I have these switches and they will completely kill the power to whatever they are connected to. If you’re still having trouble with these switches, it’s possible you have a wiring issue, 3-way wiring can be tricky sometimes.
I have 3 switches controlling 3 lights in a 3-switch wall box. Will 3of your switches fit in a triple box with a triple cover plate.
I use two switches in a double gang box. The only issue you might run into. If there are too many wires inside the box. The switch goes deeper than regular switch.
Does it need a neutral line? How could I know whether there is a neutral line?
Yes, it needs a neutral line. The best way is to check the actual wires in the switch box, the neutral line is often going to be colored white, but it also may be other colors. If there are multi-gang switches, that has a much higher likelihood of having neutrals.
My smart device will not connect to Alexa. What should I do?
First, please make sure you have successfully connected the smart devices to Gosund app, then make sure the smart devices are online in the Gosund app. Offline devices cannot be discovered in Alexa.
Then please link the Gosund app to Alexa, if Alexa asks for a username and password, please enter the Gosund app’s username and password to link to Alexa.
It says wattage is 1700w. is that with any load; led, incandescent, florescent etc.?
Yes, it is.
One doesn’t seem to work. The led light on the switch doesn’t even turn on. The other one and that worked fine same location. What are my options?
If it is wired correctly it should work with one smart switch. I have used one in two separate 3-way light systems in my house and they work just fine. Be sure that you have the neutral wire properly wired to the white wire on the back of the smart switch and that the two travelers are on the proper terminals.
How do I install the 3-way switches? There are only 2 wires from your switches?
The 2 wires from our smart switch are Neutral and Ground. On your wall wirings, you must have ground, neutral, traveler 1, traveler 2 and live/hot load wire.
Are there 2-gang and 3-gang wall plates so they can be installed side by side?
Yes, they can to do installed as single or together.
Can I install 2 of these in a 3-gang set?
Yes, you can.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>