level one POI-5003 Gigabit PoE Injector Installation Guide
- October 30, 2023
- level one
Table of Contents
level one POI-5003 Gigabit PoE Injector
Product Information
The PoE injector and splitter is a device that allows you to transmit power and data over a single Ethernet cable. It includes a Gigabit PoE injector that connects to an AC power source and a LAN switch via an Ethernet cable. The injector also has a PoE LED that indicates when it is transmitting power over the Ethernet cable. Additionally, the device includes a PoE splitter that connects to the remote networking device with either a PoE PD embedded or a PoE splitter. The splitter also has a PoE LED that indicates when it is receiving power over the Ethernet cable.
Product Usage Instructions
- Connect the AC power cord to the PoE injector. The Power LED should turn on.
- Connect the Data/In port of the injector to the LAN switch using an Ethernet cable.
- Connect another Ethernet cable from the injector to the LAN port of the remote networking device with either a PoE PD embedded or a PoE splitter as shown in the diagram. The PoE LED should light up on both the injector and the splitter.
PoE Injector and Splitter Appliction
Gigabit PoE Injector
Installation Steps
- Connect AC Power cord to PoE injector, and “Power” LED will be on.
- Connect Data/In port of Injector to LAN switch via Ethernet cable.
- Other Ethernet cable connects the injector with the LAN port of the remote networking device which is with PoE PD embedded or PoE splitter as diagram below. “PoE” LED will be lit.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>