SEDEA DVB-T2 SNT-360-HD High Definition DTT Mini Receiver Installation Guide
- June 2, 2024
- SEDEA
Table of Contents
DVB-T2 SNT-360-HD High Definition DTT Mini Receiver
Installation Guide
DVB-T2 SNT-360-HD High Definition DTT Mini Receiver
- POWER (ON/OFF): to switch the DVB-T2 receiver on or off
- Keys to control your TV set (see appendix «Programming the remote controls»)
- SUB-T: enables or disables subtitles (if broadcast on the current channel)
- TT-X: Activates or deactivates teletext (if broadcast on the current channel)
- FAV: Displays the favourite channel list
- L/R (Select audio mode and audio track)
- PLAY/PAUSE: Enables play or pause (video, music)
- STOP: Stops the playback of an unused video or audio track
-
- TIMER: Allows you to set the power on and/or a recording
- Fast rewind
- Fast forward
- PREVIOUS: Previous file or fast forward in 30 second steps
- NEXT: next file or fast forward in 30 second steps
- MENU: to enter the setup menu
- EXIT: Exit the menu to return to your programs
- Navigation buttons (Up, Down, Right, Left): used to navigate through the menus. The ‘’Up’’ and ‘’Down’’ buttons also allow you to change channels. The «Left» and «Right» buttons are used to adjust the volume.
- OK: to enter a menu, confirm a setting or display the channel list
- EPG: Electronic Programme Guide
- INFO: displays information about the channel being watched
- BACK: to return to the previous menu
- VOL: to adjust the volume
- PAGE: to change pages in a: channel list, media file list, etc.
- MEDIA: to access the content of your USB storage device
- Numeric keys
- MUTE: to mute or unmute the sound
- TV/RADIO: to switch between the TV and radio channel list
- USB port
- Infrared remote control input
- Terrestrial signal input (antenna)
- RJ45 port: allows connection to the internet
- HDMI output (HD audio/video)
- Power supply: 5 VDC / 1.5A power adapter
- Scart output (SD audio/video)
- Infrared remote (LED on (green): on, LED off: standby)
HD TV connection – HDMI
Enjoy HD quality by connecting your receiver to the TV with an HDMI cable.
TV – SCART connection
Connect the mini-receiver to your TV set using the SCART connector on the
mini- receiver and the SCART connector on the TV set.
Installation
- Connect the decoder to an electrical outlet. Make sure that the voltage of your home corresponds to the voltage indicated on the rating plate of the device
- Antenna (RF IN): Use a coaxial cable to connect the receiver to the terrestrial antenna.
- TV: Use an HDMI cable or a SCART cable to connect the receiver to your TV set.
Caution: HD (high definition) resolution will only be obtained with an HDMI cable.
PROGRAMMING THE RECEIVER
-
Press the «POWER» (ON/OFF) button to turn on the receiver. The following start-up screen should be displayed:
-
2 – Use the «LEFT» and «RIGHT» keys to change a setting. Use the «UP» and «DOWN» keys to navigate through the menu:
– First, choose the language in which the menus are displayed and the country of installation.
– 5 volt power supply: Activate this function to power an amplified antenna. Deactivate this function if your antenna is passive.
– LCN (Automatic Channel Classification): we recommend that you set this parameter to Auto. -
3 – Use the «DOWN» button to move to «Channel Search» and press the «OK» button to start the search:
Once the search is complete, the channels are saved and the first channel is displayed.
Technical data
Digital tuner
- Reception: DVB-T2
- Frequency band: 170 ~ 230 & 470 ~ 860 MHz
- Demodulation: QPSK, 16QAM, 64QAM, 256QAM
- Bandwidth: 7 and 8 MHz
- RF input level: -25 ~ 82 dBm
Power supply
- Brand: Shenzhen Yino New Electronics
- Model Number: YNH-0515A
- Input voltage: 100-240V AC
- Input AC frequency: 50-60 Hz
- Output voltage: 5.0V DC
- Output current: 1.5 A
- Output power: 7.5 W
- Average efficiency in active mode: 77.14%
- No-load power consumption : 0.05 W
Audio/Video
- Video decoder : MPEG4 AVC/H.264 HEVC/H.265 HP@L4 MPEG2 MP@ML.HL
- Audio decoder: MPEG-1
- Video output: 4:3/16:9/Auto
- Video resolution: 576P , 720P, 1080i, PAL/NTSC
Recycling
This symbol on the product, its accessories or documentation indicates that
the product complies with the EU Directive 2012/19/EU. This means that neither
the product nor its used electronic accessories may be disposed of with other
household waste.
Guarantee
The warranty for your appliance and its accessories complies with the legal provisions at the time of purchase. Spare parts for this device are available atleast for the duration of the warranty.
Declaration of conformity
** The undersigned, SEDEA, declares that the radio equipment of the type
satellite receiver is in conformity with the directive 2014/53/EU. The full
text of the EU Declaration of Conformity is available at the following web
address: https://www.sedea-pro.fr/support-technique/
Precautions for use**
- The device must be switched off before removing the power cord from the mains socket.
- Never unplug the unit by pulling on the power cord but by grasping the AC adapter.
- Do not allow children to use the unit unsupervised.
- Unplug the unit before cleaning. Clean only with a soft, dry cloth and avoid the use of aerosols.
- Use this appliance only in moderate climates. Avoid tropical and particularly humid climates.
- Provide an accessible installation location.
no-QS- 102060-102360-2107
References
- SEDEA - Votre environnement sécurisé et connecté
- Support de pose pour contreplaque - SEDEA
- Support technique - SEDEA