Lucci decor 300860 LEDlux Kube 6W Wall Bracket Instruction Manual
- June 4, 2024
- Lucci decor
Table of Contents
Lucci decor 300860 LEDlux Kube 6W Wall Bracket
Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all instructions carefully before using the product. Please keep instructions for future reference.
Warranty
- This light fitting is covered by a 3-year warranty. Please retain the proof of purchase and evidence of installation by a licensed electrician.
- The warranty will be void if there is any damage due to improper usage or modification to the fitting.
- This fitting is not suitable for use with dimmer switches.
- The warranty will be void if the fitting is used on the same circuit which has a dimmer switch.
Installation requirements
- Must be installed by a licensed electrician.
- All wiring and installation of the light fitting must adhere to local and national wiring rules. eg. AS/NZS 3000:2007/Amendment 2:2012 Electrical installations.
- Select a suitable location for installation;
- This product is suitable for indoor use only.
- Ensure the fitting is not installed next to any air vents and is not in any moist or damp areas.
- The mounting point must support 2 times the weight of the fitting.
- This light fitting is not suitable for use with dimmer switches and should not be used with circuit which has a dimmer.
- Take care not to pull any electrical wires during unpacking as this may damage the connection.
- Lay out all the components on a smooth surface and make sure there are no components missing before assembling.
- Check whether the fitting has been damaged during transport. Do not operate/install any product which appears damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.
- Ensure power to the circuit you are working on has been switched OFF.
Installation directions
-
Remove all packaging material from the product. Use the mounting bracket as a template to mark the screw positions on the wall. Install the mounting bracket onto the wall by using appropriately sized mounting screws and anchors. Ensure the screws and anchors used are suitable for the mounting surface.
-
Connect the mains supply wire to the terminal block.
Mains Supply Wire-
Earth – Yellow/Green
-
Neutral – Blue or Black
-
Live – Brown or Red
Fitting Wire -
Yellow/Green
-
Blue
-
Brown
Ensure the wires are secure and no bare wires are exposed.
-
-
Attach the fitting onto the wall bracket.
-
Secure the fitting on the wall bracket by tightening the screws on the side.
Safety tips
- Always ensure the power is OFF and the fitting has cooled down before performing any maintenance, cleaning or adjustment to the fitting.
- To avoid injury or damage to the fitting, ensure that power leads and screws are secure before connecting the power.
- Select a suitable location away from liquids and hazards.
- Ensure that the fitting does not come in contact with corrosive chemicals, etc.
- To clean, wipe with a damp clean cloth. Never soak the fitting with water.
Specifications
Specifications
SKU #| 300860| 300863
Model #| 1479AB/WH| 1479AB/AL
Rated Voltage| 220-240V~ 50Hz
Rated Wattage| 6W (including driver)
LED details| 5W, 3000K
Weight| 0.43kg
Dimensions| H:60mm W:100mm E:100mm