BaiYou BY213-C021-W Outlet Smart Strip Instruction Manual
- June 2, 2024
- BaiYou
Table of Contents
BaiYou BY213-C021-W Outlet Smart Strip
INSTALLATION INSTRUCTIONS
MODEL： BY213-C021-W
Electrical rating: input: 100V-240V/50-60Hz, 0.6A
Max; output: 5V 2.1A Wireless
charging: 15W
CAUTION: Modifications which are not approved by the party responsible
for compliance could void user’s authority to operate the equipment.
WARNING: To reduce the risk of fire, electric shock, or injury to
persons:
- Use the unit for indoor only.
- Do not use extension cord(s) to connect the unit.
- Do not try to open the unit for any reason.
- The power line should be replaced by manufacturer, service orginization or qualified staff, please do not connection personally.
CAUTION : Modifications which are not approved by the party responsible for compliancecould void user’s authority to operate the equipment.
INSTALL:
- The power adapter should be used under AC 100V-240V.please check the Voltage before use it!
- Please use it in the secure environment, do not cut the cord .
- For indoor use only.
- Products commonly used on the furniture, such as the head of a bed, cabinet, sofaand so on.
- Before install ,please cut off one hole to built the wireless charging
- Picture and drawing:
FCC WARGING
Any Changes or modifications not expressly approved by the party responsible
for compliancecould void the user’s authority to operate the equipment. Note:
This equipment has been tested and found to comply with the limits for a Class
Bdigital
device, pursuant to part 15 of the FCC Rules. Operation is subject to the
following twoconditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may causeundesired operation.
These limits are designed to provide reasonable protection against harmful
interference inaresidential installation. This equipment generates uses and
can radiate radio frequency energyand, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radioor television reception, which can be determined by
turning the equipment off and on, the user isencouraged to try to correct the
interference by one or more of the following measures: Reorient or relocate
the receiving antenna. -Increase the separation between the equipment and
receiver. -Connect the equipment into an outlet on a circuit different from
that to which the receiver isconnected. -Consult the dealer or an experienced
radio/TV technician for help. This equipment complies with FCC radiation
exposure limits set forth for an uncontrolledenvironment. This equipment
should be installed and operated with minimum distance 20cmbetween the
radiator & your body