AudioControl ACR-3 Remote Level Control User Guide
- June 13, 2024
- AudioControl
Table of Contents
REMOTE LEVEL CONTROL
Scan for Compatible Products
https://www.audiocontrol.com/car-audio/accessories/acr-3/
PRECISE AND TACTILE REMOTE LEVEL CONTROL & FUNCTION SWITCH
REMOTE CAN BE FLUSH-MOUNTED FOR CUSTOM INSTALLATIONS
Add volume control to any system
The ACR-3 is a remote level control & function switch designed to work with
specific AudioControl line output converters and processors. The ACR-3 can be
surface or custom-mounted to add level control, or total system volume
control, and more to your audio
system. Installation is simple and no power is required.
Placement And Mounting of the ACR-3
The ACR-3 may be mounted under a dash or console using its own bracket or
through custom mounting holes in the dash/console. It should be within reach
of the driver and in a spot where the LED is plainly visible.
Bracket Installation
ACR-3 mounts with four screws, which attach to the underside of a dashboard/console. Slide under the dash or console and place the ACR-3 in its mounting position, mark the mounting holes, drill pilot holes, and secure with screws.
Custom Installation
For that custom, finished look, the ACR-3 can be flush mounted directly on the
dash/console panel (or anywhere else). Referencing the drawing right,
disassemble the ACR-3. Drill a 9/32” (7 mm) hole in the panel for the control
along with a 3/32” (2.3 mm) hole for the lock tab and a 1/8” (3 mm) hole for
the LED. Reassemble the ACR-3 components on the dashboard or console.
What’s Included?
ACR-3 Remote Level Control, 20’ Phone Cable (RJ-11)
22410 70th Ave West, Mountlake Terrace, WA 98043 USA
Phone 425-775-8461
www.audiocontrol.com
©2022 AudioControl. All rights reserved. P/N 912-080-0 Rev A
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>