DIETRICH METAL FRAMING 00751361490350 0.75-in x 8-ft Vinyl Corner Bead Instruction Manual
- June 2, 2024
- DIETRICH METAL FRAMING
Table of Contents
PRO-BULL 3/4″ CORVER BEAD
00751361490350 0.75-in x 8-ft Vinyl Corner Bead
Step 1: When installing the drywall, use the minimum drywall setback on
the ¾” Bullnose Corner Bead to ensure the proper fit and achieve maximum
adhesion. Avoid using the tapered edge of the drywall board on outside
corners. Make sure the surfaces of the corner are clean and smooth. Measure
and cut the ¾” Bullnose Corner Bead to length, subtract ½” on vertical
applications.
Dry fit the corner bead to ensure the optimum fit.
Step 2: For optimal results spray the drywall surface and the flanges of
the ¾” Bullnose Corner Bead with spray adhesive and position the corner bead
into place. Once in position, apply pressure with the handle of your taping
knife and then staple the corner bead every 6”– 8” with ½” staples to keep the
¾” Bullnose Corner Bead tight to the drywall surface and to ensure a solid
bond.
Step 3: Using an 8” taping knife, apply the first coat of joint compound
to the surface of the ¾” Bullnose Corner Bead. The use of lightweight compound
or setting-type compound in this step will reduce shrinkage and speed up the
drying time. Let this dry completely, for several hours or overnight.
Step 4: Using a 10” taping knife, apply the final coat of joint compound.
Feather the compound beyond the previous coat. The use of all-purpose compound
or topping compound will make for a more durable finish. Let this dry
completely, for several hours or overnight.
Step 5: Lightly sand with 120 grit sandpaper to finish.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>